Insight into Mechanical Properties of CH3SiO3/2 Film

Young's modulus and stress-optical coefficient of self-sustained gel film of CH₃SiO_3/2 were measured. Young's modulus varied from 1.1 to 1.5 GPa, depending on the structural state of the film. It increased with an increase in the degree of polymerization that was induced by heat treatments, and also increased with subsequent exposure to the ambient condition. The stress-optical coefficient was 6.3 × 10^–12 Pa^–1 for a sample treated at 120°C. The compliance of the film seems to depend mainly on the intermolecular structure of Si–CH₃...CH₃–Si as well as hydrogen bonding due to silanols and adsorbed water.     

Effect of Insoluble Surfactants on Drainage and Rupture of a Film between Drops Interacting under a Constant Force

The deformation, drainage, and rupture of an axisymmetrical film between colliding drops in the presence of insoluble surfactants under the influence of van der Waals forces is studied numerically at small capillary and Reynolds numbers and small surfactant concentrations. Constant-force collisions of Newtonian drops in another Newtonian fluid are considered. The mathematical model is based on the lubrication equations in the gap between drops and the creeping flow approximation of Navier–Stokes equations in the drops, coupled with velocity and stress boundary conditions at the interfaces. A nonuniform surfactant concentration on the interfaces, governed by a convection–diffusion equation, leads to a gradient of the interfacial tension which in turn leads to additional tangential stress on the interfaces (Marangoni effects). The mathematical problem is solved by a finite-difference method on a nonuniform mesh at the interfaces and a boundary-integral method in the drops. The whole range of the dispersed to continuous-phase viscosity ratios is investigated for a range of values of the dimensionless surfactant concentration, Peclét number, and dimensionless Hamaker constant (covering both “nose” and “rim” rupture). In the limit of the large Peclét number and the small dimensionless Hamaker constant (characteristic of drops in the millimeter size range) a fair approximation to the results is provided by a simple expression for the critical surfactant concentration, drainage being virtually uninfluenced by the surfactant for concentrations below the critical surfactant concentration and corresponding to that for immobile interfaces for concentrations above it.     

Selective Electrochemical Epinephrine Sensor Using Self‐Assembled Monomolecular Film of 1,8,15,22‐Tetraaminophthalocyanatonickel(II) on Gold Electrode

This article describes the highly sensitive and selective determination of epinephrine (EP) using self‐assembled monomolecular film (SAMF) of 1,8,15,22‐tetraamino‐phthalocyanatonickel(II) (4α‐Ni^IITAPc) on Au electrode. The 4α‐Ni^IITAPc SAMF modified electrode was prepared by spontaneous adsorption of 4α‐Ni^IITAPc from dimethylformamide solution. The modified electrode oxidizes EP at less over potential with enhanced current response in contrast to the bare Au electrode. The standard heterogeneous rate constant (k°) for the oxidation of EP at 4α‐Ni^IITAPc SAMF modified electrode was found to be 1.94×10^?2 cm s^?1 which was much higher than that at the bare Au electrode. Further, it was found that 4α‐Ni^IITAPc SAMF modified electrode separates the voltammetric signals of ascorbic acid (AA) and EP with a peak separation of 250 mV. Using amperometric method the lowest detection limit of 50 nM of EP was achieved at SAMF modified electrode. Simultaneous amperometric determination of AA and EP was also achieved at the SAMF modified electrode. Common physiological interferents such as uric acid, glucose, urea and NaCl do not interfere within the potential window of EP oxidation. The present 4α‐Ni^IITAPc SAMF modified electrode was also successfully applied to determine the concentration of EP in commercially available injection.     

Preparation and Characterization of Ternary Europium ComplexDoped Thin SolGel Hybrid Film by Fluorescence Spectroscopy*

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｌｏｗ－ｔｅｍｐｅｒａｔｕｒｅｐｒｏｃｅｓｓｉｎｇｏｆｔｈｅｓｏｌ－ｇｅｌｍａｔｅｒｉａｌｍａｋｅｓｉｔｐｏｓｓｉｂｌｅｔｏｅｎｔｒａｐｏｒｇａｎｉｃｓｐｅｃｉｅｓｅａｓｉｌｙｗｉｔｈｉｎａｒｉｇｉｄｇｌａｓｓｍａｔｒｉ...     

Carbon film growth on iron substrates by a CVD method

Carbon film coatings have been produced by a hot‐wall chemical vapor deposition (CVD) method under moderate conditions from pyrolysis of a mixture of propane and argon on an Fe(110) substrate at temperatures of 800–900 °C for different deposition times. The effects of temperature and reaction time on the growth of the carbon films were studied. Field‐emission scanning electron microscopy (FESEM), Raman microscopy, Auger electron spectroscopy (AES) and x‐ray diffraction methods have been performed to study the surface morphologies, growth features and microstructures of the carbon film coatings. The FESEM analyses indicated that carbon films on an Fe substrate consisted of flat‐layer and filamentous morphologies. Raman and AES analyses showed that the carbon initially was crystalline but the degree of disorder in the top layer of the carbon film increased with increasing deposition temperature. High‐resolution transmission electron microscopy studies are also in agreement with Raman results. The same trend was observed when the deposition time was increased from 5 to 30 min. Copyright © 2005 John Wiley & Sons, Ltd.     

Surface transfer doping of semiconductors

Surface transfer doping relies on charge separation at interfaces, and represents a valuable tool for the controlled and nondestructive doping of nanostructured materials or organic semiconductors at the nanometer-scale. It cannot be easily achieved by the conventional implantation process with energetic ions. Surface transfer doping can effectively dope semiconductors and nanostructures at relatively low cost, thereby facilitating the development of organic and nanoelectronics. The aim of this review is to highlight recent advances of surface transfer doping of semiconductors. Special focus is given to the effective doping of diamond, epitaxial graphene thermally grown on SiC, and organic semiconductors. The doping mechanism of various semiconductors and their possible applications in nanoelectronic devices will be discussed, including the interfacial charge transfer and the energy level alignment mechanisms.     

四元化合物半导体Cu2ZnSnS4:结构、制备、应用及前景

四元化合物半导体铜锌锡硫(Cu₂ ZnSnS₄,CZTS)由于其四种组成元素在地壳中丰度非常高且安全无毒,因而成本低廉。CZTS作为直接带隙半导体材料,其吸收光谱与太阳辐射光谱匹配性好、光吸收系数高,具有结构与性质可调可控、光电性能优异等优势,是发展绿色、低成本、高效率和稳定薄膜太阳电池的理想核心材料。近年来,国内外研究者对CZTS的结构与性质、制备工艺、应用尤其是通过结构、成分的调控提高其光电转换效率等方面进行了广泛的研究和探讨。本文对CZTS的结构演变、制备工艺、光电性质与应用等进行综述,重点分析了晶体结构、缺陷、表面与界面、合金化等因素对其光伏性能的影响。同时,对CZTS作为新型能量转换材料在光催化和热电等领域的应用进行了探讨。最后对CZTS目前存在的挑战和今后的研究重点进行总结并展望了将来可能的突破方向。     

Formation and characterization of mixed polyelectrolyte–surfactant Langmuir layer templates for silver nanoparticle growth

The hydrophilic characteristic of the polyelectrolyte, poly(4-styrenesulfonic acid) (PSS), was modified by associating with the surfactant, dodecyltrimethylammonium bromide (DTMAB), to form polyelectrolyte–surfactant (PSS–DTMA) Langmuir layers at air/liquid interfaces. The interfacial behavior of the PSS–DTMA complexes was investigated with the Langmuir trough technique. The mixed PSS–DTMA Langmuir layers were then used as the two-dimensional templates to incorporate with silver precursors from the subphase, and were transferred onto mica substrates with the Langmuir–Blodgett (LB) deposition technique. The silver nanoparticles were fabricated in the resulting LB films with UV irradiation, and the morphology of the silver nanoparticle structures was analyzed by atomic force microscopy (AFM). The results indicated that increasing the DTMA⁺ content in the mixed PSS–DTMA system would enhance the hydrophobic characteristic of the complexes and then form stable PSS–DTMA Langmuir layers at interfaces. In addition, by varying the DTMA⁺ content, one could adjust the charge density in the Langmuir layer templates and thus control the association behavior between the two-dimensional templates and the silver precursors in the subphases. The AFM images demonstrated that the formation of the silver nanoparticle structures in the UV-treated LB films could be regulated with the DTMA⁺ content in the Langmuir layer templates. It is inferred that the polyelectrolyte–surfactant template offers a potential of designing structures of polyelectrolyte–nanoparticle materials with a template-synthesis procedure.     

Oscillatory electrocatalytic oxidation of methanol on an Ni(OH)2 film electrode

A film of Ni(OH)₂ deposited cathodically on a roughened nickel substrate consists of even nanoparticles, which were characterized by atomic-force microscopy (AFM). The mechanism of potential oscillations in the electrocatalytic oxidation of methanol on this film electrode in alkaline medium was studied in situ by means of Raman spectroscopy in combination with electrochemical measurements. The redox change of the nickel hydroxide film, the concentration distribution of methanol in the diffusion layer, and the oxidation products of methanol were characterized in situ by time-resolved, spatial-resolved, and potential-dependent Raman spectroscopy, respectively. Electrochemical reactions, i.e. methanol oxidation and periodic oxygen evolution, coupling with alternately predominant diffusion and convection mass transfer of methanol, account for the potential oscillations that occur during oxidation of methanol above its limiting diffusion current. This mechanism is totally different from that of methanol oxidation on platinum electrodes, for which surface steps, i.e. formation and removal of CO_ad, are essential.This work is dedicated to Professor Gyorgy Horanyi on the occasion of his 70th birthday in recognition of his numerous contributions to field of electrochemical oscillations and electrocatalysis at Ni-hydroxide electrodes.     

Comparison of two turbulent models in simulating evaporating liquid film in a wiped molecular distillator

Wiped molecular distillation is one kind of molecu-lar distillations, and its difference from others comes from the force by which the evaporating liquid film is formed. With quick rotation of the wiper, the liquid becomes thin-film well distributed on th…