Molecular imprinting in ultrathin titania gel films via surface sol-gel process

Recent progresses of molecular imprinting in metal oxide matrices were summarized. Application of the surface sol-gel process to mixtures of organic carboxylic acids and titanium alkoxide provides ultrathin layers of titania gel (10-20 nm thick), in which molecule-sized cavities are kept intact upon removal of the organic templates. The imprinted cavity reflects the structural and functional features of the template molecule, and the enantioselective imprinting of dipeptide isomers is observed. Robustness and flexibility of the ultrathin titania layer is demonstrated by the formation of interconnected titania hollow structures. Possible practical applications and unsolved problems of this technique are discussed.     

溶液成膜的温度对聚对苯二甲酸乙二酯结晶度的影响

<正> 用溶液成膜是制备聚合物薄膜的常用方法之一。但是溶液成膜的条件,如成膜温度,溶液浓度等对半结晶聚合物结晶度的影响研究报道较少。制备聚对苯二甲酸乙二酯(PET)非晶态薄膜通常使用熔融热压其后淬火的方法。由于PET在熔点附近易于降解,在薄膜中产生气泡,因而很难制备较大面积的均一厚度的薄膜,如在拉伸试验中所需     

铜膜差分脉冲阳极溶出伏安法测定药物中铋的含量

研究了铜膜电极代替汞膜电极测定重金属铋的差分脉冲溶出伏安法。实验了同位镀膜法测定铋的条件。在最佳实验条件下,Bi3+浓度在5×10-8~2×10-5mol/L范围内,其溶出峰峰高与浓度呈线性关系,检出限达到1×10-8mol/L。测定了一些药物中铋的含量,结果准确。     

Perfluorinated polymer surfaces comprising SF5-terminated long-chain perfluoroacrylate

A new perfluorinated acrylate monomer containing the SF₅(CF₂)₆-perfluorinated side chain was synthesized and polymerized into films. Bulk monomer characterization is consistent with the molecular structure based on FTIR, mass spectrometry and NMR analyses. The surface properties of polymer coatings were studied with aqueous wetting (contact angle) and X-ray photoelectron spectroscopy (XPS) methods. The surface composition is shown to be highly enriched in the terminal side chain SF₅-chemistry and exhibits properties consistent with a highly apolar, non-wetting perfluorinated polymer surface. Depth-dependent XPS studies using angular-resolved methods (ADXPS) confirmed a non-stoichiometric enrichment of sulfur and fluorine at the film ambient interface, consistent with a surface presence of the terminal SF₅-group and possibly film structural anisotropy in the surface zone. Time-of-flight (TOF) secondary ion mass spectrometry (SIMS) analysis supplements the XPS data by showing the presence of all expected SF₅-acrylate chemistry components in the outer 15 Å of the film surface.     

Carbon film growth on iron substrates by a CVD method

Carbon film coatings have been produced by a hot‐wall chemical vapor deposition (CVD) method under moderate conditions from pyrolysis of a mixture of propane and argon on an Fe(110) substrate at temperatures of 800–900 °C for different deposition times. The effects of temperature and reaction time on the growth of the carbon films were studied. Field‐emission scanning electron microscopy (FESEM), Raman microscopy, Auger electron spectroscopy (AES) and x‐ray diffraction methods have been performed to study the surface morphologies, growth features and microstructures of the carbon film coatings. The FESEM analyses indicated that carbon films on an Fe substrate consisted of flat‐layer and filamentous morphologies. Raman and AES analyses showed that the carbon initially was crystalline but the degree of disorder in the top layer of the carbon film increased with increasing deposition temperature. High‐resolution transmission electron microscopy studies are also in agreement with Raman results. The same trend was observed when the deposition time was increased from 5 to 30 min. Copyright © 2005 John Wiley & Sons, Ltd.     

Electron microscopic phase analysis of BN-thin films

A series of BN films was deposited by means of r.f. magnetron sputtering of a h-BN target onto Si(1OO) surfaces. Hereby, the substrate bias voltage was varied. Special interest is focussed to the influence of the deposition parameters on the orientation of the growing hexagonal BN film with respect to the substrate. For structural investigation, cross section samples were prepared. In addition to HRTEM and diffraction investigations, especially electron energy loss spectroscopy (EELS) was applied successfully for phase identification. For negative bias voltages of U _B =–300 V and U _B =–350V, we found a phase system consisting of a first-grown 25 nm thick layer of hexagonal structure with the c axis parallel to the substrate surface followed by the cubic phase.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Preparation and Characterization of Mixed‐Valent Nickel Oxide/Nickel Hexacyanoferrate Hybrid Films and Their Electrocatalytic Properties

Polynuclear mixed‐valent nickel oxide and nickel hexacyanoferrate hybrid film was prepared on glassy carbon electrode by multiple scan cyclic voltammetry. The film growth was monitored using electrochemical quartz crystal microbalance (EQCM). The cyclic voltammogram of the nickel hexacyanoferrate film is characterized by single redox couple whereas nickel oxide/nickel hexacyanoferrate hybrid film exhibits two redox couples. Cyclic voltammetric features suggest that the charge transfer process in both films resembles that of surface‐confined redox species. In stronger basic solution (pH ≥9), nickel hexacyanoferrate film was gradually converted into nickel oxide film during potentiodynamic cycling. The peak potential of nickel oxide redox couple moved into more negative side with increasing pH of contacting solution whereas the peak potential of nickel hexacyanoferrate redox couple remains the same. Electrocatalytic behavior of hybrid film coated electrodes toward ascorbic acid, hydrazine and hydroxylamine was investigated using cyclic voltammetry technique. Analytical application of nickel oxide/nickel hexacyanoferrate hybrid film electrode was tested in amperometry and flow injection analysis.     

Effect of monomer concentration on characteristics of methacrylic acid-grafted polyethylene film prepared by photografting

The effect of monomer concentration on photografting of methacrylic acid (MAA) onto linear low-density polyethylene (PE) film (thickness=30 μm) was investigated at 60 °C in water solvent together with the location of MAA-grafted chains. Xanthone was used as a photoinitiator which was coated on the film sample earlier. The higher percentage of grafting and graft efficiency were afforded for the system with the higher monomer concentration. The resultant MAA-grafted films were subjected to measurements of pH-responsive character and ability to adsorb cupric ion in order to understand the characteristics of function introduced. The grafted samples exhibited the pH-responsive character, where they shrank and swelled in acidic and alkaline media, respectively. The pH-responsive character of the grafted films was higher for the samples prepared in the system with a higher monomer concentration. Moreover, the grafted samples exhibited the ability to adsorb cupric ion, and the ability was reduced when the sample was prepared in the system with a higher monomer concentration. The different extents of the pH-responsive character and ability to adsorb cupric ion of the resulting grafted PE films were discussed in terms of location of grafted chains in the film substrate, which was determined by a scanning electron microscope and an attenuated total reflection infrared spectroscopy.     

Photocatalytic activity and biodegradation of polyhydroxybutyrate films containing titanium dioxide

This study aims to evaluate the photocatalytic activity and biodegradation of polyhydroxybutyrate (PHB) films containing titanium dioxide (TiO₂). Nanosized TiO₂ photocatalysts were immobilized onto PHB film to overcome the difficulty of the recovery process. PHB is a suitable base material as it is naturally biodegradable and is produced from renewable resources. The photocatalytic degradation of organic compounds, photocatalytic sterilization activity and biodegradation rate in garden soil of PHB-TiO₂ composite films were investigated. After an hour under solar illumination, 96% of methylene blue solution was decolorized. The antibacterial activity against Escherichia coli (E. coli) using PHB-TiO₂ composite film exhibited enhanced photocatalytic sterilization activity over time. As for the ability to biodegrade, PHB-TiO₂ composite films placed on soil surface with no direct solar illumination showed slower degradation rate compared to those receiving direct solar illumination. Interestingly, the latter composite films showed faster degradation rates compared to pure PHB films indicating that the degradation is mainly due to photocatalytic activity. PHB-TiO₂ composite films buried in soil generally showed slower degradation rates compared to pure PHB films and were dependent on the soil microbial activity.     

Selective Formation of Spinel Iron Oxide in Thin Films by Complexing Agent-Assisted Sol-Gel Processing

The structure of iron oxide was controlled by regulating the hydrolytic polymerization of aquo iron complexes with organic polydentate ligands such as diols. Iron oxides were prepared by calcining the precursor polymers obtained from iron nitrate nonahydrate and diols. When the diols were 1,2-pentanediol, 1,2-hexanediol and 1,2-octanediol, α-Fe₂O₃ with corundum structure appeared exclusively or as the main crystalline phase, in spite of the amount of diol used and the calcination temperature. In the case of 1,2-decanediol and 1,2-dodecanediol, when five moles of the diols were used to one mole of iron nitrate and the calcination temperatures were below 400°C, ψ-Fe₂O₃ with spinel structure appeared as the main phase and, when less than five moles of the diols were used, α-Fe₂O₃ appeared exclusively or as the main phase, irrespective of the calcination temperature. This tendency was also observed in thin films. Thus, a transparent magnetic film composed of γ-Fe₂O₃ could be prepared by applying a benzene solution of the iron polymer, obtained with 5 equivalents of 1,2-decanediol, on quartz and calcining the gel film at 350°C.