DNA‐Modified Screen‐Printed Electrodes with Nanostructured Films of Multiwall Carbon Nanotubes,Hydroxyapatite and Montmorillonite

Nanostructured films were deposited at the surface of working electrode of the screen‐printed assembly and utilized for the surface modification with double‐stranded DNA. The basic electrochemical properties of the sensors were investigated using voltammetric methods. Modified electrodes were also characterized by scanning electron microscopy and electrochemical impedance measurements. It was found that the electrode modification with DNA and nanomodifier leads to an enhanced sensitivity of the DNA voltammetric detection. New potentialities of the utilization of the K₃[Fe(CN)₆] cyclic voltammetric signal and electrochemical impedance spectroscopy were found. The DNA‐based biosensors showed good repeability and necessary stability within several days.     

New Strategy for Dehydrogenase Amperometric Biosensors Using Surfactant to Enhance the Sensitivity of Diaphorase/Ferrocene Modified Carbon Paste Electrodes for Electrocatalytic Oxidation of NADH

A carbon paste electrode (CPE) modified with diaphorase (DAP) and ferrocene (FcH) has been developed for determination of NADH at low working potential. The sensitivity and operational stability, towards the detection of the reduced form of the nicotinamide adenine dinucleotide (NADH) in flow injection analysis (FIA), were greatly improved (5 times) upon adding Tween 20 into the electrode matrix. The magnitude of the amperometric signal was dependent on DAP, FcH and surfactant loading, into the modified carbon paste electrode. A rapid and repeatable response was observed to the variation of NADH concentration in the vicinity of the electrode surface. Such advantages of the DAP/FcH/Tween 20 modified carbon paste were successfully used in the construction of L ‐lactate dehydrogenase modified electrodes. The use of this new approach can be generalized to other dehydrogenases and represents a decisive step for a versatile preparation method of amperometric biosensors.     

Detection Mechanism of Metallized Carbon Epoxy Oxidase Enzyme Based Sensors

The coenzyme FAD has been identified to play an important role in the detection mechanism of oxidase enzyme based biosensors. Incorporating FAD into the carbon composite improved sensitivity to H₂O₂ consequently increasing sensitivity to the respective analyte. The amount of active enzyme also increased thus enhancing the overall performance of the sensors. Polycarboxybetaine (PCB) has been used as a biocompatible membrane coating. The PCB coated sensors gave reproducible calibrations in protein solutions, which has been shown to be a valid protocol for testing biocompatibility. The importance of reporting selectivity in a manner which indicates the “fitness of purpose” of biosensors has been discussed.     

生物大分子自组装膜及其应用研究进展

本文主要介绍了酶，蛋白质、DNA等生物大分子自组装膜的研究进展，并对生物大分子膜在生物传感器，分子器件，高效催化材料，医用生物材料等方面的应用前景进行了展望。     

Research activities in the field of enzyme engineering in the framework of the russian state scientific program “novel methods in bioengineering”

The article describes the research activities in the field of enzyme engineering in Russia. The discussion is focused on fundamental studies of biocatalytic processes that expand utilization of enzymes, biocatalytic synthesis of organic products from renewable raw mate rials, enzymes for hydrolysis of cellulose and lignocellulose materials, immobilized cells, new enzyme-based drugs, enzymes in fine organic synthesis, bioanalytic devices, biosensors, and biofuels.     

Electrically Addressed Fabrication of Aptamer‐Based Array Electrodes

An aptamer immobilization method based electrically addressed fabrication has been developed for the preparation of aptamer‐modified arrayed electrodes, by which the human IgE aptamer was oriented and immobilized on the gold electrode surface. The optimization of the experimental conditions including the applied potential, time and scan rate of potential was investigated. The method was successfully used to immobilize the aptamer onto the desired electrodes, pixel by pixel, based on the electrically addressed approach. Compared to the control electrodes, the resulting aptamer‐modified electrodes showed their specific recognition for human IgE. The present method owns several advantages such as rapid and simple immobilization as well as its automatic addressed capability by the electric approach.     

Simultaneous determination of creatine and creatinine using amperometric biosensors

In order to determine creatine and creatinine amperometric biosensors were proposed. A bienzymatic biosensor based on creatinase (CI) and sarcosine oxidase (SO) was used for the assay of creatine and a trienzymatic biosensor based on CI, SO and creatininase (CA) for the assay of creatinine. The linear concentration ranges are of pmol l⁻¹ to nmol l⁻¹ magnitude order, with very low limits of detection. The biosensors proved high reliability for determination of creatine and creatinine as raw material, and in the pharmaceutical formulation.     

Antigen-antibody binding kinetics for biosensor applications

The diffusion-limited binding kinetics of antigen (or antibody) in solution to antibody (or antigen) immobilized on a biosensor surface is analyzed within a fractal framework. The fit obtained by a dual-fractal analysis is compared with that obtained from a single-fractal analysis. In some cases, the dual-fractal analysis provides an improved fit when compared with a single-fractal analysis. This was indicated by the regression analysis provided by Sigmaplot (San Rafael, CA). These examples are presented. It is of interest to note that the state of disorder (or the fractal dimension) and the binding rate coefficient both increase (or decrease, a single example is presented for this case) as the reaction progresses on the biosensor surface. For example, for the binding of monoclonal antibody MAb 49 in solution to surface-immobilized antigen, a 90.4% increase in the fractal dimension (D_f1 toD _f2 ) from 1.327 to 2.527 leads to an increase in the binding rate coefficient (k₁ to k₂) by a factor of 9.4 from 11.74 to 110.3. The different examples analyzed and presented together provide a means by which the antigen-antibody reactions may be better controlled by noting the magnitude of the changes in the fractal dimension and in the binding rate coefficient as the reaction progresses on the biosensor surface.     

Enzymatic Biosensor Based on Carbon Paste Electrodes Modified with Gold Nanoparticles and Polyphenol Oxidase

The results presented here demonstrate the important catalytic effect of a carbon paste electrode modified by dispersion of gold nanoparticles towards different electroactive compounds. The oxidation of hydrogen peroxide starts at potentials 400 mV less positive than at bare carbon paste, while the reduction, almost negligible at bare carbon paste, starts at 0.100 V. The influence of the size and amount of gold nanoparticles in the composite matrix on the response of the electrode is discussed. The incorporation of albumin within the carbon paste facilitates the dispersion of gold nanoparticles, improving substantially the catalytic effects. At carbon paste modified with gold nanoparticles and albumin, the peak potential separation for hydroquinone decreases from 0.385 V to 0.209 V while the reduction current increases from 16.6 to 75.2 μA. The immobilization of polyphenol oxidase within the carbon paste electrode modified with nanoparticles has allowed us to obtain a very sensitive biosensor for dopamine even in the presence of large excess of ascorbic acid.     

Highly sensitive amplified electronic detection of DNA by biocatalyzed precipitation of an insoluble product onto electrodes

The amplified detection of a target DNA, based on the alkaline phosphatase oxidative hydrolysis of the soluble 5-bromo-4-chloro-3-indoyl phosphate to the insoluble indigo product as an amplification path, is addressed by two different sensing configurations. The accumulation of the insoluble product on Au electrodes or Au/quartz crystals alters the interfacial electron-transfer resistance at the Au electrode or the mass associated with the piezoelectric crystal, thus enabling the quantitative transduction of the DNA sensing by Faradaic impedance spectroscopy or microgravimetric quartz crystal microbalance measurements, respectively. One sensing configuration involves the association of a complex consisting of the target DNA and a biotinylated oligonucleotide to the functionalized transducers. The binding of the avidin/alkaline phosphatase conjugate to the sensing interface followed by the biocatalyzed precipitation provides the amplification path for the analysis of the target DNA. This analysis scheme was used to sense the target DNA with a sensitivity limit that corresponds to 5 x 10(-14) M. The second amplified detection scheme involves the use of a nucleic-acid-functionalized alkaline phosphatase as a biocatalytic conjugate for the precipitation of the insoluble product. Following this scheme, the functionalized transducers are interacted with the analyzed sample that was pretreated with the oligonucleotide-modified alkaline phosphatase, followed by the biocatalyzed precipitation as the amplification route for the analysis of the target DNA. By the use of this configuration, a detection limit corresponding to 5 x 10(-13) M was achieved. Real clinical samples of the Tay-Sachs genetic disorder were easily analyzed by the developed detection routes.