Effects of type and number of impellers and liquid viscosity on the power characteristics of mechanically agitated gas—liquid systems

Effect of the type and number of high-speed impellers installed on a common shaft on the power characteristics was investigated in water and glucose solutions of different concentration. Different configurations of the Rushton or Smith turbines, pitched blade turbines, propeller, and A 315 impeller were tested. Measurements of power consumption were carried out within the transitional and turbulent regime of the fluid flow using the strain gauge method. Baffled agitated vessels with inner diameter of 0.288 m and 0.634 m were used for the experiments. Liquid height in the vessels was equal to the vessel diameter or it was twice higher. The relative power consumption was compared for different configurations of the impellers. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Thermal behaviour of styrene butadiene rubber/poly(ethylene-co-vinyl acetate) blends

The thermal behaviour of styrene butadiene rubber (SBR)/poly (ethylene-co-vinyl acetate) (EVA) blends was studied by using thermogravimetry (TG) and differential scanning calorimetry (DSC). The effects of blend ratio, cross-linking systems and compatibilization on the thermal stability and phase transition of the blends were analyzed. It was found that the mass loss of the blends at any temperature was lower than that of the components, highlighting the advantage of blending SBR and EVA. The addition of compatibilizer was also found to improve the thermal stability. DSC studies indicated the thermodynamic immiscibility of SBR/EVA system even in the presence of the compatibilizer. This is evident from the presence of two different glass transition temperatures, corresponding to SBR and EVA phases in both compatibilized and uncompatibilized blends.     

Nonstationary mathematical models of the electrochemical processes in volumetric porous flow electrodes

Model representations of the nonstationary processes caused by the nonstationary electrolysis regimes on three-dimensional flow electrodes (TFEs) were developed. A change in the electrode and electrolyte parameters with time was taken into account. As an illustration of the efficiency of a model of two-dimensional electrochemical system, co-electrodeposition of two metals with hydrogen evolution on TFE was considered for the case of mutually perpendicular directions of current and electrolyte flow.     

Solvent effects on the dielectric dispersion of poly(vinyl pyrrolidone)-poly(ethylene glycol) blends

The complex relative dielectric function , loss tangent , complex electric modulus and alternating current electrical conductivity dispersion behaviour of liquid poly(vinyl pyrrolidone)-poly(ethylene glycol) (PVP–PEG) blends in water, ethyl alcohol and 1,4–dioxane solvent over the entire volume mixture concentration range has been investigated in the frequency range of 20 Hz to 1 MHz at 25 °C. The PVP–PEG blends show the dielectric dispersion corresponding to the micro-Brownian motion of the PVP chain in the upper frequency region, whereas in the lower frequency region, dielectric dispersion is due to ionic conduction and electrode polarization phenomena. Results show that the conductivity values of these blends in water and dioxane can be monitored with the change in the solvent concentration, whereas it has a small variation with ethyl alcohol concentration. The comparative dielectric dispersion shape study confirms that the chain dynamics of polymers blend is influenced by heterogeneous interactions and solvent polar strength.     

Manipulating the Through‐Space Spin–Spin Interaction of Organic Radicals in the Confined Cavity of a Self‐Assembled Cage

We show a new approach to manipulating the through‐space spin–spin interaction by utilizing the confined cavity of a self‐assembled M₆L₄ coordination cage. The coordination cage readily encapsulates stable organic radicals in solution, which brings the spin centers of the radicals closer to each other. In sharp contrast to the fact that the radical in solution in the absence of the cage is in a doublet state, in the presence of the cage through‐space spin–spin interaction is induced through cage‐encapsulation effects in solution as well as in the solid state, resulting in the triplet state of the complex. These results were confirmed by ESR spectroscopy and X‐ray crystallography. The quantity of triplet species generated by encapsulation in the cage increases with increasing affinity of the radicals to the cage. We estimated the affinity between several types of guests and the cage in solution by cyclic voltammetry. We also demonstrate that the through‐space interaction of organic radicals within the self‐assembled coordination cage can be controlled by external stimuli such as heat or pH.     

Multi‐input–Multi‐output Molecular Response System Based on Dynamic Redox Behavior of Hexaphenylethane‐type Electron Donors with the Tetrahydrophenanthrazepine Skeleton: Strong Chiroptical Signals through the Transmission of Point Chirality to Helicity

The title heterocyclic donors undergo reversible C? C bond formation/cleavage upon electron transfer (dynamic redox behavior). The helical sense in both neutral and cationic states is interconvertible by facile ring flipping. The π‐type asymmetric center on the azepine nitrogen atom induces a significant degree of diasteromeric preference, thus endowing strong CD activity based on exciton coupling. Chiroptical properties could be modified not only by redox reactions but also by heat and protonation. The present redox pairs can serve as unprecedented three‐way‐input (e, H⁺, Δ) and two‐way‐output (UV/Vis, CD) response systems.     

Structural and Magnetic Study of N2, NO,NO2, and SO2 Adsorbed within a Flexible Single‐Crystal Adsorbent of [Rh2(bza)4(pyz)]n

The crystalline one‐dimensional compound, [Rh^II₂(bza)₄(pyz)]_n ( 1 ) (bza=benzoate, pyz=pyrazine) demonstrates gas adsorbency for N₂, NO, NO₂, and SO₂. These gas‐inclusion crystal structures were characterized by single‐crystal X‐ray crystallography as 1 ?1.5 N₂ (298 K), 1 ?2.5 N₂ (90 K), and 1 ?1.95 NO (90 K) under forcible adsorption conditions and 1 ?2 NO₂ (90 K) and 1 ?3 SO₂ (90 K) under ambient pressure. Crystal‐phase transition to the P space group that correlates with gas adsorption was observed under N₂, NO, and SO₂ conditions. The C2/c space group was observed under NO₂ conditions without phase transition. All adsorbed gases were stabilized by the host lattice. In the N₂, NO, and SO₂ inclusion crystals at 90 K, short interatomic distances within van der Waals contacts were found among the neighboring guest molecules along the channel. The adsorbed NO molecules generated the trans‐NO???NO associated dimer with short intermolecular contacts but without the conventional chemical bond. The magnetic susceptibility of the NO inclusion crystal indicated antiferromagnetic interaction between the NO molecules and paramagnetism arising from the NO monomer. The NO₂ inclusion crystal structure revealed that the gas molecules were adsorbed in the crystal in dimeric form, N₂O₄.     

Alcohol‐Vapor Inclusion in Single‐Crystal Adsorbents [MII2(bza)4(pyz)]n (M=Rh,Cu): Structural Study and Application to Separation Membranes

The vapor absorbency of the series of alcohols methanol, ethanol, 1‐propanol, 1‐butanol, and 1‐pentanol was characterized on the single‐crystal adsorbents [M^II₂(bza)₄(pyz)]_n (bza=benzoate, pyz=pyrazine, M=Rh ( 1 ), Cu ( 2 )). The crystal structures of all the alcohol inclusions were determined by single‐crystal X‐ray crystallography at 90 K. The crystal‐phase transition induced by guest adsorption occurred in the inclusion crystals except for 1‐propanol. A hydrogen‐bonded dimer of adsorbed alcohol was found in the methanol‐ and ethanol‐inclusion crystals, which is similar to a previous observation in 2 ?2EtOH (S. Takamizawa, T. Saito, T. Akatsuka, E. Nakata, Inorg. Chem. 2005 , 44, 1421–1424). In contrast, an isolated monomer was present in the channel for 1‐propanol, 1‐butanol, and 1‐pentanol inclusions. All adsorbed alcohols were stabilized by hydrophilic and/or hydrophobic interactions between host and guest. From the combined results of microscopic determination (crystal structure) and macroscopic observation (gas‐adsorption property), the observed transition induced by gas adsorption is explained by stepwise inclusion into the individual cavities, which is called the “step‐loading effect.” Alcohol/water separation was attempted by a pervaporation technique with microcrystals of 2 dispersed in a poly(dimethylsiloxane) membrane. In the alcohol/water separation, the membrane showed effective separation ability and gave separation factors (alcohol/water) of 5.6 and 4.7 for methanol and ethanol at room temperature, respectively.