Solubility of benzil in binary alkane + dibutyl ether solvent mixtures. Comparison of predictive expressions derived from the nearly ideal binary solvent model

Experimental solubilities are reported for benzil dissolved in six binary mixtures containing dibutyl ether with hexane, heptane, octane, cyclohexane, methylcyclohexane, and 2,2,4-trimethylpentane at 25°C. Results of these measurements are compared to the predictions of equations developed previously for solubility in systems of nonspecific interactions. The most successful equation in terms of goodness of fit involved a volume fraction average of the excess Gibbs energies relative to the Flory-Huggins model, and predicted the experimental solubilities in the six systems studied to within an overall average absolute deviation of 3.4% and with a maximum deviation of 6.0%.     

Diffusion in aqueous copper sulfate and copper sulfate-sulfuric acid solutions

Diffusion coefficients of copper sulfate-water and copper sulfate-sulfuric acid-water solutions have been determined at 25°C using conductimetric and diaphragm-cell techniques. The ternary diffusion measurements indicate that diffusion of sulfuric acid can produce large counterflows of copper sulfate and vice versa. If diffusion of copper sulfate in aqueous sulfuric acid solutions is treated as a binary process, the measured apparent diffusivities of copper sulfate can be 1 to 8% lower than the salt's true diffusivity. Equations are developed to predict transport coefficients from the concentrations and mobilities of the diffusing species.     

Thermoanalytical study of nucleating effects in polypropylene composites

Nucleating and transcrystallization behaviour of additives in engineering PP composites and the effect of modified interfacial structure is the subject of this series of papers. The first part concentrates on polypropylene/liquid crystalline polyester blends. Increased crystallisation temperature and degree of crystallinity of polypropylene is characteristic to the blends containing different amount of LCP additive. Transcrystallization process governs the formation of crystalline structure in these systems in course of isothermal crystallisation at 132C. The nucleating effect of LCP gives rise to more uniform crystalline structure in the polypropylene phase.The financial support of the OTKA 014194 is acknowledged with gratitude.     

热致液晶聚合物分散相的形态及其与树脂连续相之间的相互作用

用动态力学谱仪和扫描电子显微镜测试观察了六个含热致液晶聚合物（ＴＬＣＰ）共混体系中的相间相互作用与微结构．组份损耗峰向内或大或小的移动表明在这些共混物中存在着强弱不同的相间相互作用．在各个共混物中所含ＴＬＣＰ公相的形态有圆球状、椭球状、条状和微纤状的．结果表明，在含ＴＬＣＰ的不相容聚合物共混体系中，相间相互作用与微纤形成之间没有直接的相关性．     

Magnetic field effects detected by exciplex fluorescence and preferential solvation in binary solvents. The effect of temperature

At 20–70 °C, the temperature has almost no effect on the semisaturation field,B _1/2, or on the magnetic effects detected by exciplex fluorescence (pyrene/N,N-dimethylaniline) in binary benzene-DMSO mixtures. In individual solvents (ethanol, methanol) heating leads to a noticeable increase in the magnetic effect, whileB _1/2 decreases. The results obtained corroborate a previously proposed hypothesis that polar microclusters are formed in binary solvents with components of different polarity. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1821–1823, October, 1993.     

高密度燃料HDF-1与橡胶的相容性研究

报道了在室温和70 ℃下橡胶材料G402氟硅胶、丁腈胶5171、丁腈胶4170、贮囊橡胶用合成的高密度燃料HDF-1浸泡后性能如伸长率、邵尔硬度、重量、面积体积的变化，并与采用3号喷气燃料（RP-3）实验结果进行对照。用红外光谱测定了燃料浸泡前后橡胶组成的变化。实验结果表明，G402氟硅胶和贮囊对于HDF-1和RP-3有相近的相容性，丁腈胶5171对HDF-1的相容性比对RP-3的相容性稍差，丁腈胶4170对HDF-1的相容性比对RP-3的相容性更差的结果。因此，丁腈胶5171和丁腈胶4170不能用于HDF-1储存和输送，原使用RP-3系统的橡胶密封件不能直接使用HDF-1。     

高分散直接甲醇燃料电池Pt／C阴极电催化剂的制备过程机理与表征

 通过调变的多元醇法制备了40％Pt／C直接甲醇燃料电池阴极电催化剂，应用透射电镜（TEM）及X射线衍射（XRD）方法表征催化剂．结果表明，由该制备方法可得到高分散，金属粒子粒径分布窄的高载量贵金属催化剂．TEM统计结果表明，调变多元醇法制备的40％Pt／C催化剂的金属粒子平均粒径约为2．9nm．直接甲醇燃料电池单池性能测试表明，该方法制得的40％Pt／C的电催化氧还原能力比同型商品催化剂更好．另外，利用UV－Vis光谱研究了催化剂的制备过程．结果表明，在调变的多元醇法中，Pt4＋的还原是一步完成的．     

Thermal behaviour of bisitaconimide and reactive diluent blends

Thermal behaviour of blends based on N,N'-bis(4-itaconimidophenyl) ether (IE) and 4,4'-bis(4-allyl-2-methoxyphenoxy) benzophenone (R₁) or 4,4'-bis(2-allylphenoxy) benzophenone (R₂) are described in this paper. The reactive diluent content was varied from 5-50% (mass/mass) in these blends. A decrease in the melting point and exothermic peak temperature was observed with increasing mass percent of reactive diluent. Thermal stability of blends was affected at high mass percentage of reactive diluents. This revised version was published online in August 2006 with corrections to the Cover Date.     

Densities,Ultrasonic Speeds,Viscosities and Refractive Indices of Binary Mixtures of Benzene with Benzyl Alcohol,Benzonitrile, Benzoyl Chloride and Chlorobenzene at 303.15 K

Densities,ρ, ultrasonic speeds, u, viscosities,η, and refractive indices, n, of pure benzene, benzyl alcohol (BA), benzonitrile (BN), benzoyl chloride (BC), chlorobenzene (CB) and their thirty six binary mixtures, with benzene as common component, were measured at 303.15 K over the entire mole fraction range. From these experimental data the values of deviations in ultrasonic speed, △u, isentropic compressibility, △k_s,excess acoustic impedance, Z^E, deviation in viscosity, Dh, and excess Gibbs free energy of activation of viscous flow, G^*E, and partial molar isentropic compressibility, Kφ,2⁰ of BA, BN, BC and CB in benzene were computed. The variation of these derived functions with composition of the mixtures suggested the increased cohesion (molecular order) in the solution and that interaction (A-B)＞(A-A) or (B-B).Moreover, theoretical prediction of ultrasonic speed, viscosity and refractive index of all the four binary mixtures was made on the basis of empirical and semi-empirical relations by using the experimental values of the pure components. Comparison of theoretical results with the experimental values was made in order to assess the suitability of these relations in reproducing the experimental values of u, η and n. Also, molecular radii of pure liquids and the average molecular radii of binary mixtures were evaluated using the corresponding refractive indices of pure liquids and binary mixtures. The average molecular radii of binary mixtures were found to be additive with respect to mole fraction of the pure component.