非缔合二元有机液体混合物过剩热容的测定与计算

溶液的过剩热容是热力学的重要函数，对其测定与研究具有理论与实际意义．过剩热容不仅可检验溶液中分子间的相互作用，并可利用其计算混合物的热容．本文报告了用微量热仪对环乙烷一本等七个二元物系全浓度范围内在29815K、常压下过剩热容CEp进行的测定工作，上述体系是由具有     

改进的蝗虫优化算法在双目标应急物资中心选址问题中的应用

近年来世界各地频发灾情疫情等紧急事件,严重影响人民的生活物资保障。在这种情况下,急需建立应急物资中心来缓解燃眉之急。该类问题通常面临资源稀缺并且时间相对紧迫的处境,因此需要在短时间内获得合理的应急设施选址方案来提升服务的质量和效率。本文对应急物资中心选址问题展开研究,提出一种考虑后续运输成本以及有概率发生紧急事件而导致无法正常运送物资的双目标离散选址模型,并为此设计一种二进制多目标蝗虫优化算法。该算法采用模糊关联熵系数来引导迭代更新,同时为其添加外部档案,最优解选择机制和竞争决策机制来提升算法性能。多次数值实验表明该算法的计算效率和求解质量较高,可作为应急物资中心选址问题的一种可行且有效的算法。     

Interactions between naproxen and maltoheptaose,the non-cyclic analog ofβ-cyclodextrin

The crystallinity of naproxen in solid combinations with amorphous maltoheptaose, the non-cyclic analog of -cyclodextrin, was assessed using differential scanning calorimetry supported by X-ray powder diffractometry. Cogrinding induced a decrease in drug crystalinity to an extent which depended on the grinding time, and was most pronounced for the combination of equimolecular composition. Thermal analysis showed that the mechanism behind the conversion of crystalline naproxen into the amorphous state by cogrinding with maltoheptaose differed from that with randomly substituted, amorphous -cyclodextrins. Interactions of naproxen with maltoheptaose in aqueous solution were studied by means of fluorescence spectroscopy, phase-solubility analysis, and computeraided molecular modelling. Maltoheptaose can wrap up naproxen, taking on a cyclic conformation and forming a pseudo inclusion complex (apparent binding constant K_{1: 1} = 1.0 × 10³ (–20%) L mol^–1 at 25 °C) which is about as stable as the true inclusion complex with -cyclodextrin in the lowest temperature range (0-100 K). A better complexing ability for naproxen in terms of binding constant values, however, was displayed by both native and derivatized -cyclodextrins, the hosts with covalently-bound cyclic structures.     

Morphology and crystallization of blends of linear low density polyethylene with a semiflexible liquid crystalline polymer

The morphology and the crystallization behavior of blends of linear low density polyethylene (LLDPE) with an experimental sample of a semiflexible liquid crystalline polymer (SBH 112 by Eniricerche, Italy) have been studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and scanning electron microscopy (SEM). The blends possess a two-phase morphology, due to immiscibility of the two components. SEM observations show that dispersion of the minor SBH phase is favored at low (相似文献   

Energetics of magnesium, strontium, and barium doped lanthanum gallate perovskites

LaGaO₃ perovskites doped with Sr or Ba at the La site and Mg at the Ga site were prepared by solid-state reaction or sol-gel method and characterized. Enthalpies of formation from constituent oxides at 298 K were determined by high-temperature oxide melt solution calorimetry. Energetic trends are discussed in terms of defect chemistry. As oxygen deficiency increases, formation enthalpies define three trends, LaGa_1−yMg_yO_3−δ (LGM), La_1−xSr_xGa_1−yMg_yO_3−δ (LSGM), and La_1−xBa_xGa_1−yMg_yO_3−δ (LBGM). They become less exothermic with increasing doping, suggesting a dominant destabilization effect from oxygen vacancies. The endothermic enthalpy of vacancy formation is 275±37, 166±18 and 138±12 kJ/mol of V_O^·· for LGM, LBGM and LSGM, respectively. Tolerance factor and ion size mismatch also affect enthalpies. In terms of energetics, Sr is the best dopant for the La site and Mg for the Ga site, supporting earlier studies, including oxygen ion conductivity and computer modeling.     

K2O对Pt—Sn／Al2O3催化剂表面酸性及MCH脱氢稳定性的影响

利用吡啶吸附－ＩＲ，ＮＨ３吸附－脱附，原位热重积炭，ＤＳＣ等技术并结合甲基环己烷（ＭＣＨ）脱氢活性试验，研究了Ｋ２Ｏ对工业Ｐｔ－Ｓｎ／Ａｌ２Ｏ３催化剂的表面酸性及ＭＣＨ脱氢稳定性的影响，结果表明，Ｋ２Ｏ能有效地调变催化剂的表面酸性，降低其表面酸中心特别是强酸中心的数目；ＭＣＨ脱氢反应的积炭量随Ｋ２Ｏ含量的增加而减少，但催化剂的高温脱氢稳定性与Ｋ２Ｏ含量并不完全呈顺变关系，Ｋ２Ｏ含量应严格控制，当Ｋ     

Poly(ethylene oxide) blends with crosslinking polyester resin

The miscibility of polyethylene oxide (PEO) with oligoester and polyester resin, the morphology of the blends and the kinetics of PEO crystallization in the blends were studied by optical microscopy and differential scanning calorimetry. The blends were found to be miscible with uncured resin at 60°C. After isothermal crystallization of PEO from liquid oligoester or UV cured polyester about 20% of the PEO material is still dissolved in the resin and it is incorporated between lamellae or in the interspherulitic regions. It was observed that the growth rate of PEO spherulites and the degree of crystallinity of PEO in the blends decreases very fast together with a decrease of the PEO content and the progress of the resin crosslinking.     

Micro construction of poly(epsilon-caprolactone)/poly(L-lactic acid) blend film by solution casting under microwave irradiation

The micro construction of poly(epsilon-caprolactone) (PCL) and poly(L-lactic acid) (PLLA) blend films fabricated by solution casting under microwave irradiation was investigated by selective enzymatic degradation and scanning electron microscopy (SEM). The results were totally different from the blends obtained by conventional methods. The blend was more homogeneous and the PCL continuous phase more compact as no spherulites and tiny zone separation were observed from the film surface and no PCL network was observed inside the film, and the degradation of a PCL plank by Pseudomonas lipase was significantly retarded. The distributed PLLA micro spheres were enlarged and amorphous. The thermal behavior of the blend by microwave heating revealed that PCL and PLLA underwent a melting process, which induced the variations of the PCL phase and PLLA spheres. The weight loss caused by degradation of the PCL/PLLA blend obtained by conventional methods (B50c) is greater than that of the blend obtained by microwave methods (B50m), which reflects the change in morphology from a loose PCL network (B50c) to a dense PCL plank (B50m).     

Quantitative weight of evidence method for combining predictions of quantitative structure-activity relationship models

ABSTRACT

A method for combining statistical-based QSAR predictions of two or more binary classification models is presented. It was assumed that all models were independent. This facilitated the combination of positive and negative predictions using a quantitative weight of evidence (qWoE) procedure based on Bayesian statistics and the additivity of the logarithms of the likelihood ratios. Previous studies combined more than one prediction but used arbitrary strengths for positive and negative predictions. In our approach, the combined models were validated by determining the sensitivity and specificity values, which are performance metrics that are a point of departure for obtaining values that measure the weight of evidence of positive and negative predictions. The developed method was experimentally applied in the prediction of Ames mutagenicity. The method achieved a similar accuracy to that of the experimental Ames test for this endpoint when the overall prediction was determined using a combination of the individual predictions of more than one model. Calculating the qWoE value would reduce the requirement for expert knowledge and decrease the subjectivity of the prediction. This method could be applied to other endpoints such as developmental toxicity and skin sensitisation with binary classification models.     

A view and a review of the melting of alkali metal halide crystals

Summary A representational model, proposed to account for the physical changes that accompany the melting of alkali halides, was described in Part 1 [1]. The liquid is portrayed as undergoing continual dynamic structural reorganization of its constituent ions between individual small domains, zones of various regular, crystal-type arrays. These alternative arrangements are stabilized by the enthalpy of melting, which, in liquids, relaxes the restriction for solids that only the single, most stable, crystal structure can be present. The dynamic character of the melt accounts for its fluid character and the loss of long-range order [1, 2]. This model is extended here to consider the phase diagrams of binary, common ion, alkali halide mixtures comprehensively reviewed in [3]. Factors determining whether each of these yields a eutectic, or a solid solution, on cooling are discussed and several trends in the 70-phase diagrams are identified. Eutectic formation, involving maintenance of the liquid state below the melting points of the pure components, is ascribed to the participation, in an extended dynamic equilibrium, of additional domains having the regular structures characteristic of double salts. The known crystalline double binary halides [3], Li/Cs or Rb/F, Cl, Br or I, melt at temperatures well below those of the simpler pure component salts. It is concluded that the set/liq model for melting, proposed in [1, 2], accounts for some important properties of the phase diagrams presented in [3].