Synthesis of Highly Uniform Molybdenum–Glycerate Spheres and Their Conversion into Hierarchical MoS2 Hollow Nanospheres for Lithium‐Ion Batteries

Highly uniform Mo–glycerate solid spheres are synthesized for the first time through a solvothermal process. The size of these Mo–glycerate spheres can be easily controlled in the range of 400–1000 nm by varying the water content in the mixed solvent. As a precursor, these Mo–glycerate solid spheres can be converted into hierarchical MoS₂ hollow nanospheres through a subsequent sulfidation reaction. Owing to the unique ultrathin subunits and hollow interior, the as‐prepared MoS₂ hollow nanospheres exhibit appealing performance as the anode material for lithium‐ion batteries. Impressively, these hierarchical structures deliver a high capacity of about 1100 mAh g^?1 at 0.5 A g^?1 with good rate retention and long cycle life.     

Enhanced Catalytic Activity in Liquid‐Exfoliated FeOCl Nanosheets as a Fenton‐Like Catalyst

A facile liquid‐phase exfoliation method to prepare few‐layer FeOCl nanosheets in acetonitrile by ultrasonication is reported. The detailed exfoliation mechanism and generated products were investigated by combining first‐principle calculations and experimental approaches. The similar cleavage energies of FeOCl (340 mJ m^?2) and graphite (320 mJ m^?2) confirm the experimental exfoliation feasibility. As a Fenton reagent, FeOCl nanosheets showed outstanding properties in the catalytic degradation of phenol in water at room temperature, under neutral pH conditions, and with sunlight irradiation. Apart from the increased surface area of the nanosheets, the surface state change of the nanosheets also plays a key role in improving the catalytic performance. The changes of charge density, density of states (DOS), and valence state of Fe atoms in the exfoliated FeOCl nanosheets versus plates illustrated that surface atomistic relationships made the few‐layer nanosheets higher activity, indicating the exfoliation process of the FeOCl nanosheets also brought about surface state changes.     

胆酸钠与支撑磷脂双层膜作用的电化学研究

采用电化学方法研究胆酸钠(NaC)与s-BLM的相互作用, 并结合实验结果对NaC与s-BLM的作用机理进行了讨论.     

葡萄球菌肠毒素B基因的膜片电极支撑双层类脂膜核酸传感器的研究

本研究用膜片电极支撑双层类脂膜(BLMs)核酸传感器,检测葡萄球菌肠毒素B(SEB)基因。BLMs在膜片钳尖端形成后,传感器的检测电流大小和施加的电压成正比。通过在BLMs上固定针对SEB基因特异的直链十二烷烃链(0～273.65μg/L)修饰的单链寡核苷酸(C12-ssDNA)探针与膜片钳系统一同构建成膜片电极支撑BLMs核酸传感器。电流大小与探针的浓度呈正相关,线性回归方程I=5.49 2.94C;相关系数r=0.9962。SEB基因浓度在20～5000μg/L范围时,检测的电流信号与SEB基因浓度的自然对数呈负相关,线性回归方程I=1103.26-103.62lnC,相关系数r=0.9977;同时,核酸传感器有很好的特异性,与不产SEB的金葡菌属、其它食物中毒菌的基因组DNA和空白对照组反应无明显电信号响应。应用原子力显微镜对BLMs表面微观结构、ssDNA固定于BLMs上和BLMs上杂交洗脱后的表面微观结构进行观察。本研究构建的膜片电极支撑BLMs核酸传感器为SEB基因的检测提供了一种快速、灵敏、特异性强的方法。     

Impact on Morphological Characterization and Emulsion Stability of Lactoferrin–Beet Pectin Electrostatic Complexes

Interfacial protein–polysaccharide complexes can be utilized in emulsion-based delivery system and contained functional component or medical ingredient. In the present work, the interaction of lactoferrin (LF, 0.2 wt%) with beet pectin (BP, 0–0.15 wt%) was researched in aqueous solutions at different pH (2–9) and ionic strength (0–800 mM) to provide the information about properties of complexes. A simulative environment was created to explore the optimal concentration of BP to formulate LF-coated stabilized emulsion and how the emulsion responded to the changing environmental pH (2–9) and ionic strength (0–500 mM). Particle size, particle distribution index, zeta-potential, turbidity, Turbiscan stability index,, and peak thickness were used to characterize the physical stability of emulsions. The confocal laser scanning microscopy was used to derive the microscopy images of droplets. The results indicated that 0.4 wt% was the optimal concentration to formulate emulsions, and the LF-BP-coated bilayer emulsion has a preferable stability in more extensive range than the pure LF-stabilized emulsions under the environmental stresses through electrostatic interactions. The results of this study will play an important role in facilitating the utilization of LF-BP complexes as an emulsifier in the development of incorporating functional component or medical ingredient into commercial products.     

Three‐in‐One Oxygen Vacancies: Whole Visible‐Spectrum Absorption,Efficient Charge Separation,and Surface Site Activation for Robust CO2 Photoreduction

A facile and controllable in situ reduction strategy is used to create surface oxygen vacancies (OVs) on Aurivillius‐phase Sr₂Bi₂Nb₂TiO₁₂ nanosheets, which were prepared by a mineralizer‐assisted soft‐chemical method. Introduction of OVs on the surface of Sr₂Bi₂Nb₂TiO₁₂ extends photoresponse to cover the whole visible region and also tremendously promotes separation of photoinduced charge carriers. Adsorption and activation of CO₂ molecules on the surface of the catalyst are greatly enhanced. In the gas‐solid reaction system without co‐catalysts or sacrificial agents, OVs‐abundant Sr₂Bi₂Nb₂TiO₁₂ nanosheets show outstanding CO₂ photoreduction activity, producing CO with a rate of 17.11 μmol g^?1 h^?1, about 58 times higher than that of the bulk counterpart, surpassing most previously reported state‐of‐the‐art photocatalysts. Our study provides a three‐in‐one integrated solution to advance the performance of photocatalysts for solar‐energy conversion and generation of renewable energy.     

Chemical Degradation of Mercury Alkyls Mediated by Copper Selenide Nanosheets

Methylation and demethylation of mercury compounds are two important competing processes that control the net production of highly toxic mercury alkyls, methylmercury (MeHg⁺) and dimethylmercury (Me₂Hg), in environment. Although the microbial and the photochemical methylation and demethylation processes are well studied in recent years but the chemical methylation and demethylation processes have not been studied well. Herein, we report for the first time that the CuSe nanosheet has remarkable ability to activate the highly inert Hg?C bonds of various MeHg⁺ and Me₂Hg compounds at room temperature (21 °C). It facilitates the conversion of MeHg⁺ into Me₂Hg in the absence of any proton donors. Whereas, in the presence of any proton source, it has unique ability to degrade MeHg⁺ into CH₄ and inorganic mercury (Hg²⁺). Detailed studies revealed that the relatively fast Hg?C bond cleavage was observed in case of MeHgSPh or MeHgI in comparison to MeHgCl, indicating that the Hg?C bond in MeHgCl is relatively inert in nature. On the other hand, the Hg?C bond in Me₂Hg is considered to be exceedingly inert and, thus, difficult to cleave at room temperature. However, CuSe nanosheets showed unique ability to degrade Me₂Hg into CH₄ and Hg²⁺, via the formation of MeHg⁺, under acidic conditions at room temperature. DFT calculations revealed that the Hg?C bond activation occurs through adsorption on the surface of (100)‐faceted CuSe nanosheets.     

Microwave assisted hydrothermal synthesis of tin niobates nanosheets with high cycle stability as lithium-ion battery anodes

SnNb₂O₆ and Sn₂Nb₂O₇ nanosheets were synthetized via microwave assisted hydrothermal method, and innovatively employed as anode materials for lithium-ion battery. Compared with Sn₂Nb₂O₇ and the previously reported pure Sn-based anode materials, the SnNb₂O₆ electrode exhibited outstanding cycling performance.     

A Near-Infrared-Controllable Artificial Metalloprotease Used for Degrading Amyloid-β Monomers and Aggregates

Proteolysis of amyloid-β (Aβ) is a promising approach against Alzheimer's disease. However, it is not feasible to employ natural hydrolases directly because of their cumbersome preparation and purification, poor stability, and hazardous immunogenicity. Therefore, artificial enzymes have been developed as potential alternatives to natural hydrolases. Since specific cleavage sites of Aβ are usually embedded inside the β-sheet structures that restrict access by artificial enzymes, this strongly hinders their efficiency for practical applications. Herein, we construct a NIR (near-IR) controllable artificial metalloprotease (MoS₂-Co) using a molybdenum disulfide nanosheet (MoS₂) and a cobalt complex of 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (Codota). Evidenced by detailed experimental and theoretical studies, the NIR-enhanced MoS₂-Co can circumvent the restriction by simultaneously inhibition of β-sheet formation and destroying β-sheet structures of the preformed Aβ aggregates in living cell. Furthermore, our designed MoS₂-Co is an easy to graft Aβ-target agent that prevents misdirected or undesirable hydrolysis reactions, and has been demonstrated to cross the blood brain barrier. This method can be adapted for hydrolysis of other kinds of amyloids.     

Regulating Oxygen Configuration in Hierarchically Porous Carbon Nanosheets for High-Rate and Durable Na+ Storage

Surface oxygen functionalities (particularly C−O configuration) in carbon materials have negative influence on their electrical conductivity and Na⁺ storage performance. Herein, we propose a concept from surface chemistry to regulate the oxygen configuration in hierarchically porous carbon nanosheets (HPCNS). It is demonstrated that the C−O/C=O ratio in HPCNS reduces from 1.49 to 0.43 and its graphitization degree increases by increasing the carbonization temperature under a reduction atmosphere. Remarkably, such high graphitization degree and low C−O content of the HPCNS-800 are favorable for promoting its electron/ion transfer kinetics, thus endowing it with high-rate (323.6 mAh g⁻¹ at 0.05 A g⁻¹ and 138.5 mAh g⁻¹ at 20.0 A g⁻¹) and durable (96 % capacity retention over 5700 cycles at 10.0 A g⁻¹) Na⁺ storage performance. This work permits the optimization of heteroatom configurations in carbon for superior Na⁺ storage.