Deposition of Oral Bacteria and Polystyrene Particles to Quartz and Dental Enamel in a Parallel Plate and Stagnation Point Flow Chamber

The aim of this paper is to determine to what extent (i) deposition of oral bacteria and polystyrene particles, (ii) onto quartz and dental enamel with and without a salivary conditioning film, (iii) in a parallel plate (PP) and stagnation point (SP) flow chamber and at common Peclet numbers are comparable. All three bacterial strains showed different adhesion behaviors, and even Streptococcus mitis BMS, possessing a similar cell surface hydrophobicity as polystyrene particles, did not mimic polystyrene particles in its adhesion behavior, possibly as a result of the more negative ζ potentials of the polystyrene particles. The stationary endpoint adhesion of all strains, including polystyrene particles, was lower in the presence of a salivary conditioning film, while also desorption probabilities under flow were higher in the presence of a conditioning film than in its absence. Deposition onto quartz and enamel surfaces was different, but without a consistent trend valid for all strains and polystyrene particles. It is concluded that differences in experimental results exist, and the process of bacterial deposition to enamel surfaces cannot be modeled by using polystyrene particles and quartz collector surfaces.     

Generalized classical theory of magnetism

We consider an Ising model with Kac potential ^dK(¦x¦) which may have arbitrary sign, and show, following Gates and Penrose, that the free energy in the classical limit0+ can be obtained from a variational principle. When the Fourier transform of the potential has its maximum atp=0 one recovers the usual mean-field theory of magnetism. When the maximum occurs forp ₀0, however, one obtains an oscillatory or helicoidal phase in which the magnetization near the critical point oscillates with period 2/¦p ₀¦. An example with a potential possessing parameter-dependent oscillations is shown to exhibit crossover phenomena and a multicritical Lifshitz point in the classical limit.     

The characterization of silica microparticles by electrophoretic mobility measurements

Summary Electrophoretic mobility measurements in the pH 2‐10 range are described for several commercial HPLC silica microparticles and a laboratory-produced product. The content of metal impurities for the silicas was also determined by AAS. An acidic/hydrothermal treatment was used to generate a more homogenous surface for some of the silicas. The zero points of charge (zpc) for both a native and a treated silica plus several commercial HPLC silicas were compared. The electrophoretic mobility method may be useful in predicting the utility of certain types of silica supports for chromatographic separations.     

On-line sorption preconcentration of metals based on mixed micelle cloud point extraction prior to their determination with micellar chemiluminescence: Application to the determination of chromium at ng l levels

The on-line incorporation of cloud point extraction (CPE) to flow injection analysis (FIA) is modified to extract and preconcentrate metal species rapidly, avoiding the formation of hydrophobic complexes, using a mixed micellar medium. Coupling the procedure with chemiluminescence (CL) detection based on the catalytic activity of metal species on the luminol-hydrogen peroxide reaction and enhancing the signal with the presence of a micellar carrier containing bromide ions produces a powerful tool for the preconcentration and determination of metal species at ng l⁻¹ levels. As an analytical demonstration ultratrace concentrations of chromium were conveniently detected and quantified in samples with a complex matrix such as seawater and wastewater. The figures of merit for the determination of chromium were: 0.9-1.6% R.S.D. (n=5) with detection and quantification limits 0.5 and 2.0 ng l⁻¹, respectively. The calibration graph was rectilinear from 2 to 200 ng l⁻¹ (r=0.9996, n=6). Several other metal ions were determined in ideal situations, with analogous results.     

Coupling Cloud Point Extraction to Instrumental Detection Systems for Metal Analysis

The purpose of this article is to review and evaluate cloud point extraction of metals and its coupling to different contemporary instrumental methods of analysis. This review covers a selection of the literature published on this topic over the period mainly between 1997 and September 2005 (consisting of 50 publications). The current state of the art for CPE concerning metals and metal chelates is presented with special emphasis on the hyphenation of this interesting extraction/preconcentration approach mediated by surfactants to spectrophotometry, atomic spectroscopy and separation techniques. We present contemporary CPE developments concerning metal speciation and determination and their application to different environmental, clinical, geological and food samples. Strategies for method development as well as future perspectives are also covered.     

Effect of combining rules for cubic equations of state on the prediction of double retrograde vaporization

In this work, the phenomenon of double retrograde vaporization (DRV) is simulated using the Peng–Robinson equation of state with the classical mixing rules and several combining rules for the cross-energy and cross-co-volume parameters. The binary interaction parameters are set equal to zero in all cases, i.e., the calculations are entirely predictive. An interesting conclusion is that the predictions using the classical combining rules (geometric mean rule for a_ij and arithmetic mean rule for b_ij) provide the best agreement with the experimental data for all the systems tested: methane + n-butane, methane + n-pentane, ethane + limonene, and ethane + linalool. Another interesting observation is that several combining rules for b_ij, other than the arithmetic mean rule, predict the existence of three phases in equilibrium in a very narrow temperature range close to the critical temperature of methane in the methane + n-pentane system, even though, literature data indicates that n-hexane is the first n-alkane to present partial liquid phase immiscibility with methane.     

Diagramme de phases du systeme binaire LiNO3-NaNO3

Phase diagram of the binary system LiNO₃-NaNO₃ has been obtained by using direct and differential thermal analysis between 323 and 623 K. This system is characterized by an eutectic plateau at 467 K. The eutectic point is at 0.465 mole NaNO₃. A peritectic appears at 550 K. There is no miscibility in the solid state. These findings associated with some other thermodynamic results have been used to calculate the activities of the constituents along the liquids curve and the excess thermodynamic functions at 618 K. The constituents seem not to have a symmetrical influence on the thermodynamic quantities.

     

Preparation and mechanical properties of thermal energy storage microcapsules

A series of heat energy storage microcapsules was prepared using melamine-formaldehyde resin as the shell material and the mechanical properties of the shell were investigated. A phase change material whose melting point was 24 °C was used as core and the quantity of heat involved in phase transition was 225.5 J/g. Average diameter of the microcapsules varied from 5 to 10 μm, and the globular surface was smooth and compact. The mechanical properties of the shell were evaluated by observing the surface morphological structure change after application of pressure by means of scanning electron microscopy. When the mass ratio of the core and shell material is 3:1, a yield point of about 1.1×10⁵ Pa was found and when the compression was increased beyond this point the microcapsules showed plastic behavior. This has been attributed to the cross-link density and to the high degree of reaction of the shell material. Different yield points subsequently reflected differences in the mechanical behavior. It was also found that the mechanical intensity of double-shell microcapsules was better than that of single shelled ones.     

磁性纳米标记检测技术在生物医学即时检测领域的研究进展

基于磁性纳米材料的磁标记检测技术具有灵敏度高、线性范围广、信号检测便捷等优点。由于生物样品自身磁背景信号极低,相比于光学标记检测技术,磁标记检测技术在蛋白质、核酸、细胞、病原体及生物组织检测中均表现出更高的灵敏度,在生物医学即时检测领域展现了良好的应用前景。该文围绕磁性纳米粒在即时检测领域的最新研究进展,重点介绍了其在蛋白质、核酸以及几类病原体检测方面的应用,并对基于磁性纳米粒的即时检测技术发展方向及应用前景进行了展望。     

A computational study of the LiH dimer

A theoretical study of the properties of the linear LiH dimer was undertaken. In this dimer, an unusual type of hydrogen bonding (termed "inverse" hydrogen bonding by some authors), which involves the hydrogen bonded molecule acting as an electron donor (rather than as a proton donor), is exhibited. The optimized geometry, dipole moment, interaction energy, atomic charges, harmonic vibrational frequencies, and frequency shifts for the dimer are computed at the SCF, MP2, and QCISD levels of theory using mainly a 6-31++G(d,p) basis set. We also examined the relative stability of the mono-deuterated isotopomers of linear (LiH)(2), i.e., Li-H...Li-D and Li-D...Li-H. Analysis of the normal vibrational modes, changes in the partial atomic charges, and changes in the vibrational frequencies of LiH on complexation were used to gain insight into the bonding and properties of the linear LiH dimer and its isotopomers.