Fiber-Optic Chemical Sensor for Detection of NO2 Using Poly (3-Octylthiophene)

A fiber-optic chemical sensor (FOCS) for detection of nitrogen dioxide (NO₂) molecules is reported. The FOCS presents an optropode structure because of the transmission properties of the sensitive material. The NO₂ FOCS is activated by using the semiconductor polymer: regioregular head-to-tail poly(3-octylthiophene-2,5-diyl). The operation wavelength of the sensor is 543.5 nm such that a simple LED and detector can be used for the design of this device. The sensor response decreases after each exposure, demonstrating the reduction in sensitivity as well as irreversibility lower than 5%. However, its properties such as rapid response, high selectivity, high sensitivity (0.43 ± 0.01 muW/ppm), hygroscopic properties, and its operation at room temperature make this kind of FOCS a good alternative for NO₂ toxic gas detection.     

Resistivity－temperature characteristics of sol gel YBa2Cu3Oy samples synthesized in flowing oxygen atmosphere

The relationship of resistivity versus synthesizing temperature of sol gel YBa_2Cu_3O_y samples was studied when prepared under flowing oxygen conditions. A set of high-temperature ρ－T curves was obtained for the whole process. After the sample finished the test measuring, its resistivity was ρ_{300}=9.83×10^{-3 }Ω·cm at room temperature. The ρ－T curve also showed that the orthorhombic－tetragonal phase transformation of sol-gel YBa_2Cu_3O_y sample occurred at 581℃ for the sample in the rising temperature process, but at 613℃ in the cooling process, lower than that of the samples made by using the conventional powder metallurgy methods.     

Estimation of growth rate in unidirectionally solidified multicrystalline silicon by the growth-induced striation method

Multicrystalline silicon was grown by unidirectional solidification method using the accelerated crucible rotation technique. The application of the accelerated crucible rotation technique in unidirectional solidification method induced growth striations across the axial direction of the grown crystal. This striation pattern was observed from carbon concentration distribution, obtained by using Fourier transform infrared spectroscopy. The generated striation pattern was found to be weak and discontinuous. Some striations were absent, probably due to back melting, caused during each crucible rotation. From the growth striations and applied time period in crucible rotation, the growth rate was estimated by using Fourier transformation analysis.     

Effects of diamines and their fluorinated groups on the color lightness and preparation of organosoluble aromatic polyimides from 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]‐hexafluoropropane

To investigate the position and amount of the CF₃ group affecting the coloration of polyimides (PIs), we prepared 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]hexafluoropropane ( 2 ) with four CF₃ groups with 2‐chloro‐5‐nitrobenzotrifluoride and 2,2‐bis(4‐hydroxyphenol)hexafluoropropane. A series of soluble and light‐colored fluorinated PIs ( 5 ) were synthesized from 2 and various aromatic dianhydrides ( 3a – 3f ). 5a – 5f had inherent viscosities ranging from 0.80 to 1.19 dL/g and were soluble in amide polar solvents and even in less polar solvents. The glass‐transition temperatures of 5 were 221–265 °C, and the 10% weight‐loss temperatures were above 493 °C. Their films had cutoff wavelengths between 343 and 390 nm, b* values (a yellowness index) ranging from 5 to 41, dielectric constants of 2.68–3.01 (1 MHz), and moisture absorptions of 0.03–0.29 wt %. In a comparison of the PI series 6 – 8 based on 2,2‐bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane, 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]propane, and 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane, we found that the CF₃ group close to the imide group was more effective in lowering the color; this means that CF₃ of 5 , 7 , and 8f was more effective than that of 6c . The color intensity of the four PI series was lowered in the following order: 5 > 7 > 6 > 8 . The PI 5f , synthesized from diamine 2 and 4,4′‐hexafluoroisopropylidenediphthalic anhydride, had six CF₃ groups in a repeated segment, so it exhibited the lightest color among the four series. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 922–938, 2003     

Alkylation of 2,3,6,11-tetrahydroanthra[2,1-d]isothiazole-3,6,11-trione and its S-oxide

The reactions of 2,3,6,11-tetrahydroanthra[2,1-d]isothiazole-3,6,11-trione with dimethyl sulfate, benzyl chloride, and allyl bromide afforded the corresponding 2-alkyl-2,3,6,11-tetrahydroanthra[2,1-d]isothiazole-3,6,11-triones and 3-(alkoxy)-6,11-dihydroanthra[2,1-d]isothiazole-6,11-diones. The reactions of 2,3,6,11-tetrahydroanthra[2,1-d]isothiazole-3,6,11-trione and its S-oxide with a formaldehyde—secondary amine system yielded 2-[(alkylamino)methyl]-2,3,6,11-tetrahydroanthra[2,1-d]isothiazole-3,6,11-triones and 2-[(alkylamino)methyl]-3,6,11-trioxo-2,3,6,11-tetrahydroanthra[2,1-d]isothiazole 1-oxides, respectively.     

Synthesis of thieno[2,3-d]pyrimidine and quinazoline derivatives from monothiooxamides

A method for syntheses of previously unknown derivatives of thieno[2,3-d]pyrimidines and quinazolines from monothiooxamides was proposed.     

一种有机电致发光共聚物的制备和性能

采用Suzuki方法合成了9，9-二辛基芴与萘并硒二唑的两种无规共聚物并研究了其紫外光谱、光致发光和电致发光性能。两种聚合物的电致发光波长为650～666nm，均为发饱和红光的LED材料，其电致发光外量子效率最高达到了1．05％。随着共聚物中萘并硒二唑含量的增加，共聚物的光致发光和电致发光的发射波长均有少量红移。证明了根据共轭高聚物链内能量转移原理，在聚芴链中引入不同含量的窄带隙杂环单元可实现对聚芴发光颜色的调节。     

Fluorine containing phosphazene polymers

In this paper we highlighted the synthesis, characterization, and practical exploitation of different types of polyphosphazenes substituted with fluorinated groups. There are several ways in which fluorine atoms can be inserted into polyphosphazenes, all of which leading to different polymers showing a wide range of characteristics. In general it is true that the insertion of fluorine atoms into phosphazene macromolecules leads to an enhancement of the thermal stability, flame resistance, low-temperature elastomericity, and chemical inertness of the phosphazenes obtained. The contribution of Italian research groups to the preparation and exploitation of organic commercial macromolecules grafted onto fluorinated polyphosphazenes is also reviewed.     

Vanadium(III) chloride catalyzed Biginelli condensation: solution phase library generation of dihydropyrimidin-(2H)-ones

The three component condensation of an aldehyde, a β-keto ester and urea (thiourea) in the presence of a catalytic amount of VCl₃ is disclosed for the solution phase synthesis of dihydropyrimidinones. The ease of synthesis and work-up allowed the parallel synthesis of a 48-membered library of dihydropyrimidinones quickly and efficiently in good yields.