Elastic incoherent neutron scattering studies on glass forming hydrogen-bonded systems

Neutron incoherent elastic scattering data have been collected on homologues disaccharides (trehalose, maltose, sucrose)/H₂O mixtures as a function of temperature. The results show a dynamical transition at T238 K, T235 K and T233 K for trehalose, maltose and sucrose/H₂O mixtures, respectively, marking a cross-over in molecular fluctuations between harmonic and non-harmonic dynamical regimes, proving a higher ‘rigidity’ of trehalose mixture with respect to maltose and sucrose mixtures. This finding accounts for the higher cryptobiotic effectiveness of trehalose, namely a capability to encapsulate biostructures in a more rigid environment.     

Elevation of the glass transition temperature in flexible‐chain semicrystalline polymers

In the idealized two‐phase model of a semicrystalline polymer, the amorphous intercrystalline layers are considered to have the same properties as the fully‐amorphous polymer. In reality, these thin intercrystalline layers can be substantially influenced by the presence of the crystals, as individual polymer molecules traverse both crystalline and amorphous phases. In polymers with rigid backbone units, such as poly(etheretherketone), PEEK, previous work has shown this coupling to be particularly severe; the glass transition temperature (T_g) can be elevated by tens of degrees celsius, with the magnitude of the elevation correlating directly with the thinness of the amorphous layer. However, this connection has not been explored for flexible‐chain polymers, such as those formed from vinyl‐type monomers. Here, we examine T_g in both isotactic polystyrene (iPS) and syndiotactic polystyrene (sPS), crystallized under conditions that produce a range of amorphous layer thicknesses. T_g is indeed shown to be elevated relative to fully‐amorphous iPS and sPS, by an amount that correlates with the thinness of the amorphous layer; the magnitude of the effect is severalfold less than that in PEEK, consistent with the minimum lengths of polymer chain required to make a fold in the different cases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1198–1204, 2007     

Classical Coulomb fluids in a confined geometry

It has already been argued that a classical (three-dimensional) Coulomb fluid confined between two parallel walls exhibits ideal gas features when the distance between the walls becomes small; this is confirmed in the present paper. Two-dimensional models of Coulomb fluids (with a logarithmic interaction), confined in a strip, are also studied. These models do not become ideal gases in the narrow strip limit. The correlation functions are also studied. There is a special temperature at which exact results are obtained. At that temperature, the two-dimensional, two-component plasma (two-dimensional Coulomb gas), which is a conductor when unconfined, becomes a dielectric as soon as it is confined in a strip of noninfinite width. This can be understood as a displacement of the Kosterlitz-Thouless transition by the confinement.     

Rheological and diffusion properties of a dextran-con A polymer in the presence of Insulin and Magnesium

Previous work carried out in our laboratories has focused on the formation and investigation of a dextran and concanavalin A (con A) based gel, which has the ability to alter its conformational structure in the presence and absence of free and terminal glucoses such that a gel–sol phase transition occurs. Here we report the diffusion and rheological investigations in to the effects of the addition of insulin and varyingconcentrations of magnesium chloride hexahydrate (Mg₂Cl₂6H₂O) at 20 and 37 °C. Rheological examination of glucose-sensitive (dextran-con A) gels were conducted using a cone and plate viscometer used in continual rotation and oscillatory modes. The results are interpreted in terms of the structure of the gel network and suggest rheological assessment provides an effective method of assessing the properties of gel systems. The subsequent testing of such formulations in in-vitro diffusion experiments revealed a reduction in the rate of diffusivity in the insulin marker, poly R-478 dye. The performance of this self-regulating drug delivery system has been examined and the addition of insulin and magnesium chloride may alter the way in which the gel operates as a drug delivery device and in the delivery of insulin. This may have implications for other ligands.     

Stability of Markovian structure observed in high frequency foreign exchange data

Contrary to the common sense in economics and financial engineering, price fluctuations at very fine level of motion exhibit various evidences against the efficient market hypothesis. We attempt to investigate this issue by studying extensive amount of foreign currency exchange data for over five years at the finest level of resolution. We specifically focus on the proposed stability in binomial conditional probabilities originally found in much smaller examples of financial time series. In order to handle very large data, we have written an efficient program in C that automatically generates those conditional probabilities. It is found that the stability is maintained for extremely large time duration that covers almost the entire period. Based on the length of conditions for which the conditional probabilities are distinguishable each other, we identify the length of memory being less than 3 movements.     

Molecular modeling study on surface,thermal, mechanical and gas diffusion properties of chitosan

The motivation of this work is to provide reliable and accurate modeling studies of the physical (surface, thermal, mechanical and gas diffusion) properties of chitosan (CS) polymer. Our computational efforts have been devoted to make a comparison of the structural bulk properties of CS with similar type of polymers such as chitin and cellulose through cohesive energy density, solubility parameter, hydrogen bonding, and free volume distribution calculations. Atomistic modeling on CS polymer using molecular mechanics (MM) and molecular dynamics (MD) simulations has been carried out in three dimensionally periodic and effective two dimensionally periodic condensed phases. From the equilibrated structures, surface energies were computed. The equilibrium structure of the films shows an interior region of mass density close to the value in the bulk state. Various components of energetic interactions have been examined in detail to acquire a better insight into the interactions between bulk structure and the film surface. MD simulation (NPT ensemble) has also been used to obtain polymer specific volume as a function of temperature. It is demonstrated that these V–T curves can be used to locate the volumetric glass transition temperature (T_g) reliably. The mechanical properties of CS have been obtained using the strain deformation method. Diffusion coefficients of O₂, N₂, and CO₂ gas molecules at 300 K in CS have been estimated. The calculated properties of CS are comparable with the experimental values reported in the literature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1260–1270, 2007     

Effect of nanotube functionalization on the properties of single‐walled carbon nanotube/polyurethane composites

A commercially available aliphatic thermoplastic polyurethane formulated with a methylene bis(cyclohexyl) diisocyanate hard segment and a poly(tetramethylene oxide) soft segment and chain‐extended with 1,4‐butanediol was dissolved in dimethylformamide and mixed with dispersed single‐walled carbon nanotubes. The properties of composites made with unfunctionalized nanotubes were compared with the properties of composites made with nanotubes functionalized to contain hydroxyl groups. Functionalization almost eliminated the conductivity of the tubes according to the conductivity of the composites above the percolation threshold. In most cases, functionalized and unfunctionalized tubes yielded composites with statistically identical mechanical properties. However, composites made with functionalized tubes did have a slightly higher modulus in the rubbery plateau region at higher nanotube fractions. Small‐angle X‐ray scattering patterns indicated that the dispersion reached a plateau in the unfunctionalized composites that was consistent with the plateau in the rubbery plateau region. The room‐temperature modulus and tensile strength increase was proportionally higher than almost all increases seen previously in thermoplastic polyurethanes; however, the increase was still an order of magnitude below what has been reported for the best nanotube–polymer systems. Nanotube addition increased the hard‐segment glass transition temperature slightly, whereas the soft‐segment glass transition was so diffuse that no conclusions could be drawn. Unfunctionalized tubes suppressed the crystallization of the hard segment; whereas functionalized tubes had no effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 490–501, 2007     

Nanostructured polymetallaynes of controlled length: Synthesis and characterization of oligomers and polymers from 1,1′‐bis‐(ethynyl)4,4′‐biphenyl bridging Pt(II) or Pd(II) centers

The reactivity of square planar palladium(II) and platinum(II) complexes in trans or cis configuration, namely trans or cis‐[dichlorobis(tributylphosphine)platinum(II)] and trans‐[dichlorobis(tributylphosphine)palladium(II)] with 1,1′‐bis(ethynyl) 4,4′‐biphenyl, DEBP, leading to π‐conjugated organometallic oligomeric and polymeric metallaynes, was investigated by a systematic variation of the reaction conditions. The formation of polymers and oligomers with defined chain length [? M(PBu₃)₂ (C?C? C₆H₄? C₆H₄? C?C? )]_n (n = 3–10 for the oligomers, n = 20–50 for the polymers) depends on the configuration of the precursor Pt(II) and Pd(II) complexes, the presence/absence of the catalyst CuI, and the reaction time. A series of model reactions monitored by XPS, GPC, and NMR ³¹P spectroscopy showed the route to modulate the chain growth. As expected, the nature of the transition metal (Pt or Pd) and the molecular weight of the polymers markedly influence the photophysical characteristics of the polymetallaynes, such as optical absorption and emission behavior. Polymetallaynes with nanostructured morphology could be obtained by a simple casting procedure of polymer solutions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3311–3329, 2007     

Thickness dependence of free‐standing thin films

Below a critical thickness, of about 60 nm, the glass transition temperature of polystyrene (PS) films decreases with film thickness, as demonstrated using free‐standing films. A geometrical model is developed here describing this phenomenon in the case of ideal (Gaussian) chains. This model, which can be considered as an application of the free volume model, assumes that the decrease of the glass transition temperature from thick to ultrathin films is due to the modification of the interpenetration between neighboring chains. The theoretical curve deduced from the model is in excellent agreement with the PS experimental results, without using any adjustable parameters. From these results, it can be concluded that new chain motions, usually buried in bulk samples, are expressed by the presence of the surface. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 10–17, 2007     

过渡金属催化的1,6-烯炔环异构化反应

1,6-烯炔底物在过渡金属催化剂作用下的化学行为得到了广泛的研究,重点是关于过渡金属催化的1,6-烯炔环异构化反应.从反应机理角度入手,把1,6-烯炔环异构化反应按启动方式总结为三类,并对这三种方式启动的1,6-烯炔环异构化反应进行了详细地总结和阐述.