Effect of oxygen on regulation of properties of moderately boron-doped diamond films

Regulation of oxygen on properties of moderately boron-doped diamond films is fully investigated. Results show that, with adding a small amount of oxygen (oxygen-to-carbon ratio < 5.0%), the crystal quality of diamond is improved, and a suppression effect of residual nitrogen is observed. With increasing ratio of O/C from 2.5% to 20.0%, the hole concentration is firstly increased then reduced. This change of hole concentration is also explained. Moreover, the results of Hall effect measurement with temperatures from 300 K to 825 K show that, with adding a small amount of oxygen, boron and oxygen complex structures (especially B₃O and B₄O) are formed and exhibit as shallow donor in diamond, which results in increase of donor concentration. With further increase of ratio of O/C, the inhibitory behaviors of oxygen on boron leads to decrease of acceptor concentration (the optical emission spectroscopy has shown that it is decreased with ratio of O/C more than 10.0%). This work demonstrates that oxygen-doping induced increasement of the crystalline and surface quality could be restored by the co-doping with oxygen. The technique could achieve boron-doped diamond films with both high quality and acceptable hole concentration, which is applicable to electronic level of usage.     

Ensuring robustness in the quality of antibiotic susceptibility test discs for four novel antibiotics

Antibiotic susceptibility test (AST) discs are used as an in-vitro diagnostic tool to select the appropriate antibiotic to treat an infection. Generally, the concentration of the drug loaded on to the AST discs is measured by studying its activity against quality control organisms. This methodology has several limitations—it is time consuming, requires trained manpower, has a wider acceptance criteria of zone of inhibitions—causing ambiguity in judging smaller variations in drug concentration. To overcome these issues, we have developed and validated high-performance liquid chromatographic (HPLC) methods for the determination of strength of AST discs for in-house researched antibiotics, namely Levonadifloxacin/WCK 771, Nafithromycin/WCK 4873, Cefepime-Tazobactam/WCK 4282, and Cefepime-Zidebactam/WCK 5222. The drugs were extracted from the AST discs using an appropriate solvent. The developed methods are simple, accurate, precise, reproducible, rugged, and robust. They are efficient in terms of time, and can be easily conducted in a quality control laboratory during release as well as stability evaluation of AST disc. Application of HPLC methods for the determination of strength of AST discs ensures flawless quality and, consequently, a better selection of drugs to treat bacterial infections in clinics.     

基于质量分级的生鲜农产品供应链的定价与保鲜策略研究

为了有效降低生鲜农产品损耗,保障流通与销售过程中生鲜农产品的品质及安全,解决消费者对生鲜农产品品质及其新鲜度的高追求与生鲜农产品冷链物流成本过高导致保鲜投入不足之间的矛盾,文中以价格和新鲜度为市场需求的主要影响因素,分别在产销地均不分级、销地分级和产地分级三种质量分级模式下,构建了供应商和零售商的利润函数,采用stac...     

不同水文情形下巢湖有色可溶性有机物来源及分布特征

于2018年1月(枯水)、4月(平水)、7月(丰水)对巢湖开展野外观测,探讨不同水文条件下有色可溶性有机物(CDOM)的光谱组成结构及分布特征.结果表明丰水期巢湖溶解性有机碳(DOC)均值(3.90±0.40)mg·L-1与枯水期均值(3.89±0.19)mg·L-1无显著差异(t-test,p>0.05),丰水期S2...     

新型准光学可调辐射源研究

 本文介绍一种新型毫米波准光学可调辐射源,它采用由面对称三反射镜准光学谐振腔和绕射光栅组成高频互作用系统,利用中等能量级的相对论带状电子注激励,产生频率可调的宽带毫米波、远红外波段的辐射。这种新方案的机理性实验在电子科技大学首次获得成功,其主要实验参数：电子注的能量为400~500kV,电压脉冲宽度70ns,同步脉冲磁场强度1.2T; 磁场脉冲宽度10ms,带状电子注尺寸10nm×1mm;通过热测实验,我们成功地检测到3mm波段的高频信号,其峰值功率达到数十千瓦量级。     

大气湍流对多色高斯-谢尔模型光束扩展的影响

基于广义惠更斯-菲涅耳原理,采用Rytov相位结构函数二次近似和硬边窗口函数的复高斯展开法,推导了受光阑限制的多色高斯-谢尔模型(GSM)光束在大气湍流中的二阶矩束宽公式。研究表明：二阶矩束宽随着大气湍流折射率结构常数、源光谱带宽和光束传输距离的增加而增大,随着光束截断参数和光束相干参数的增加而减小;并且,当源光谱带宽越大、光束截断参数和光束相干参数越小,则湍流对受光阑限制的多色GSM光束扩展的影响就越小。关键词：      

Specially profiled reflector for spherical front beams focusing

Focusing the power emitted from a source with spherical wave front by a specially profiled reflecting surface has been attempted using the simple ray tracing method. The reflector (mirror) surface profile that achieves such power redistribution is obtained from solving an ordinary first order differential equation using common numerical techniques. Furthermore, the proposed methodology can be useful to design complex reflectors for the electomagnatic and the acoustic systems, which finds broad engineering, industrial and biomedical applications.     

Verification of terahertz-wave spectrophotometry by Compton backscattering of coherent synchrotron radiation

We developed a continuous-spectrum light beam from Compton backscattering by using coherent synchrotron radiation in an L-band linac at the Kyoto University Research Reactor Institute. The ratio of Compton backscattered photons to background photons when coherent synchrotron radiation was used was three times larger than when coherent transition radiation was used. The transmission spectrum of a polystyrene film in the terahertz-wave region was evaluated by measuring the spectrum of the Compton backscattered photons and it roughly agreed with that measured by a Martin–Puplett-type interferometer. The spectrophotometry using Compton backscattering shows promise as a new tool for investigations in terahertz-wave science.     

制备工艺条件对SiO2薄膜非均质特性的影响

薄膜材料的生长过程随镀膜机尺寸的增大而呈现新的规律,为制备膜层均匀性好、材料均质的大尺寸光学元件,分别在不同离子源能量、沉积压强、基板加热温度及基板转速条件下,采用离子辅助电子束蒸发方法制备了不同单层SiO2薄膜样品;利用分光光度计及椭偏仪分别对样品的透过率及椭偏参数进行测量,并对测量结果进行拟合得到不同样品的折射率及非均质特性。实验结果表明,工件架转速是使大尺寸SiO2薄膜材料产生非均质特性的主要影响因素,离子源能量、基板温度、沉积压强通过影响材料生长过程对材料的非均质特性产生调控;对于大尺寸薄膜光学元件,工件架转速存在限制的条件下,优化其他工艺参数可以获得均质SiO2薄膜材料,该结果对于制备具有优良性能的大尺寸薄膜光学元件具有借鉴意义。     

Beam Parameters for End Diffraction of TE0 Mode of Planar Waveguide

The relation between diffractive beam parameters and normalized frequency is analyzed that leads to two improved Tormulas for two kinds of mode-field halT-widths and several formulas for divergence angle as well as beam propagation factor. The numerical calculation indicates that the maximal relative error is less than 0.5% within a reasonable parameter range.