多电子束契伦柯夫自由电子激光振荡器

我们对多电子束契伦柯夫自由电子激光进行了首次实验研究。280A,500kV的电子束被引入一多介质矩形谐振腔,在频率为33.4GHz处产生了1.7MW的契伦柯夫相干受激辐射。互作用效率为1.2％。     

Quantitative measurements of Ge surface segregation during SiGe alloy growth

Ge segregation during the growth of Si_{1 − x}Ge_x alloys (x = 5, 10, 20, and 40%) was studied using X-ray photoelectron spectroscopy. The alloys were grown in thicknesses up to 20.0 nm at 500°C to measure quantitatively the amount of segregated surface Ge. The length of alloy needed to reach steady-state growth edge was found to decrease with increasing alloy concentration (4.8, 2.8, 2.4, and 2.0 nm, respectively). It was found that each alloy had a complete monolayer of Ge on the surface and an increasing amount of segregated Ge in the second layer (20, 55, 80, and 95%, respectively) during steady-state growth. An increase in the temperature of alloy growth (400–750°C) resulted in an increase in the leading edge of alloy growth but did not change the amount of segregated Ge during steady-state growth. We propose that film stress is responsible for the amount of Ge segregation.     

TERAHERTZ QUALITY CONTROL OF POLYMERIC PRODUCTS

We report on experiments that evaluate the potential of terahertz (THz) time-domain spectroscopy (TDS) for quality control of polymeric compounds. We investigate specimens out of a polyethylene compound with silver-coated titanium dioxide nanospheres and a glass-fiber reinforced epoxy composite. We further examine an industrial polymer product produced by injection molding. Our data demonstrates that THz imaging is a powerful tool for contactless quality control in the polymer industry.     

Development of a finite-element analysis methodology for the propagation of delaminations in composite structures

Analysing the collapse of skin-stiffened structures requires capturing the critical phenomenon of skin-stiffener separation, which can be considered analogous to interlaminar cracking. This paper presents the development of a numerical approach for simulating the propagation of interlaminar cracks in composite structures. A degradation methodology was introduced in MSC.Marc, which involved the modelling of a structure with shell layers connected by user-defined multiple-point constraints (MPCs). User subroutines were written that employ the virtual crack closure technique (VCCT) to determine the onset of crack growth and modify the properties of the user-defined MPCs to simulate crack propagation. Methodologies for the release of failing MPCs are presented and are discussed with reference to the VCCT assumption of self-similar crack growth. The numerical results obtained by using the release methodologies are then compared with experimental data for a double-cantilever beam specimen. Based on this comparison, recommendations for the future development of the degradation model are made, especially with reference to developing an approach for the collapse analysis of fuselage-representative structures. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 1, pp. 15–42, January–February, 2007.     

Optical design of a toroidal grating monochromator based beam line on Indus-1

In this paper, we discuss the detailed optical design of a beam line that is under construction on the synchrotron radiation source, Indus-1. Toroidal mirrors are used as pre-and post- focusing elements and a toroidal grating monochromator as a dispersing element. Using three interchangeable gratings, this monochromator will give, at a moderate resolution, a good throughput on the sample in the wavelength range 40 to 1000 Å. Effect of various parameters and their optimization on the resolution and throughput characteristics have been studied by ray tracing calculations, and presented.     

高斯光束照射下的圆盘夫琅禾费衍射

推导了高斯光束照射圆孔或圆盘的衍射场普遍表达式，计算了半波带数接近于零的情况下上述衍射场的数据，进而分析了圆盘衍射场在艾里斑中增加一个暗环的原因。     

工业CT图像均匀性校正

在工业CT图像重建过程中,射束硬化使得图像出现“杯状”伪影,阵列探测器响应不一致使得图像出现环状伪影、带状伪影和点伪影,影响图像均匀性.本文分析了射束硬化的原理和探测器响应不一致的数学模型,并通过实验,对探测器响应进行多挡板定标得到校正系数表.利用查表插值的方法对投影数据进行均匀性校正,消除上述伪影.     

合肥光源二分割三角型光位置检测器的研制

介绍了一种用于合肥光源的二分割三角型光位置检测器的研制,对其主要性能(如灵敏度和线性范围)进行了理论分析和实际测量,测量结果与理论分析相当吻合.文中还给出了光位置测量系统的组成     

Expert consensus in solo voice performance evaluation

Experts were interviewed to identify criteria for evaluation of vocal performance. A scale was then constructed and inter- and intrajudge reliability assessed. Experts listened to 19 different performances, plus 6 presented a second time. Interjudge reliability for one judge was modest, but increased dramatically as the size of the judge panel increased. The most reliable items were overall score and intonation accuracy. Diction was less reliable than other items. Intrajudge reliability was higher for overall score than for any other item. A factor analysis on the test items yielded factors labelled intrinsic quality, execution, and diction. Another factor analysis, using the experts as variables, revealed two underlying evaluative dimensions. It was found that 13 experts were primarily influenced by execution, and that 8 were mainly affected by intrinsic quality. Interjudge and intrajudge reliabilities of these two groups differed.     

三级近似束流光学计算程序

为了精确计算束流在离子光学系统中的传输,用Visual FORTRAN 6.5语言编写了一个计算程序,长约13000行. 此程序可以计算由三圆筒单透镜、三膜片单透镜、双元筒透镜、均匀场静电加速管、磁四极透镜、六极磁铁、静电四极透镜、偏转磁铁、螺线管透镜、ExB~正交电磁场分析器、静电偏转器、漂浮管、QWR(Quarter Wave Resonators)和SLR(Split Loop Resonators)射频加速元件等元件任意组成的离子光学系统. 粒子轨迹的计算可精确到三级近似. 粒子的分布类型也可以有多种选择. 程序具有最优化计算功能,即可以自动调整元件的参数,以实现所需要的光学条件. 各元件之后的横向和纵向相图以及系统的束流包络线以图形方式显示在屏幕上.