Using a process-centered approach to minimize the effort of compliance

 The complexity of different quality standards can, in principle, be covered by different approaches and strategies. In-depth process mapping of quality control (QC) work streams was used by the analytical laboratories of Lonza AG to show up the principle differences in being compliant to different quality systems. The results identified two main drivers for all necessary actions: process-related activities and infrastructure-related activities. In addition, a clear indication of the economic impact of these driving forces was gained, which led the laboratories to decide on a process-oriented approach. This approach has the advantage of being able to reflect the different demands of different quality assurance (QA) regulations within the same QC organizational structure. Following the process helps avoid unnecessary efforts in analytical work and represents a very economical approach, at the same time, providing high flexibility to react to different QA or customer demands. Received: 5 July 2002 Accepted: 12 November 2002 Acknowledgements The process-oriented approach resulted from many, very challenging discussions for which I would like to thank the staff of my organization (Analytics & QC), especially, the QA staff and the LIMS team. Presented at Analytica Conference, 23–26 April 2002, Munich, Germany Correspondence to B. Ciommer     

Outer product analysis of electronic nose and visible spectra: application to the measurement of peach fruit characteristics

Visual aspect and aroma are among the most important features of fruit that determine consumer preferences. Electronic nose and spectroscopic techniques have shown positive results in evaluating some basic analytical parameters of fruit and global features such as the cultivar.In this paper, we illustrate and discuss a study aimed at evaluating the improvement derived by the fusion of visible spectra and electronic nose data. These experiments were performed on a population of yellow peaches belonging to two cultivars. Each sample was measured by visible optical spectroscopy and by electronic nose. In addition, a number of reference parameters were also measured by conventional destructive methodologies.Collected data were analysed individually and then fused together in order to classify the two cultivars and to estimate the reference parameters. Data fusion was performed building the outer product matrix for each measurement. The set of matrices was then successively unfolded and analysed by conventional chemometrics tools.Results were improved using outer products, for instance in classification average percentage errors of 25, 10, and 7 for electronic nose, spectra, and outer product, respectively was achieved. Regression analysis provides the evidence of a substantial orthogonal appearance of the datasets, which offer former hidden information on fruit classification.     

Mechanical properties of fiber reinforced styrene-butadiene rubbers using surface-modified UHMWPE fibers under EB irradiation

Aiming to develop a high performance fiber reinforced rubber of SBR, a special technique using electron beam (EB) irradiation-induced graft-polymerization was applied to ultra-high molecular-weight polyethylene (UHMWPE) fibers. Although UHMWPE is chemically inert, N-vinyl formamide (NVF) could be graft-polymerized onto the UHMWPE fiber surface with this special technique. A maximum grafting percentage of 23.6% was achieved. The composite of SBR and grafted UHMWPE fibers with maximum grafting indicated a linear increase in the initial modulus and strength with the fiber content. At the fiber content of 10%, the initial modulus was improved about five times with respect to that of the pure SBR, while the strength was done about twice. At this moment, only a small reduction could be observed in the strain compared with that of pure SBR. The fiber reinforced rubber with a good performance was obtained in the system of SBR and grafted UHMWPE fibers.     

Microstructural and physicochemical study of the buried Fe/AlGaAs(100) interface by transmission electron microscopy and x‐ray emission spectroscopy

Among the magnetic metal/semiconductor contacts, the Fe/GaAs system has been widely studied owing to its potential applications in electronic devices. In contrast, there are not many studies concerning the Fe/Al_xGa_1?xAs contact, and in particular there are no reports concerning the changes induced in the interfacial zone by the presence of Al. In this work, thin polycrystalline iron films were deposited by ion beam sputtering at room temperature on a 300 nm thick Al_0.25Ga_0.75As layer grown by molecular beam epitaxy onto GaAs(001). X‐ray diffraction analysis showed that the iron films are polycrystalline, and indications of a (002) texture of the film were observed. The fine scale analysis of the interface was achieved by high‐resolution transmission electron microscopy (HRTEM) observations, the results of which are compared with the physicochemical information obtained from electron‐induced x‐ray emission spectroscopy, by analysing the Al 3p valence states at the Fe/Al_xGa_1?xAs interface. The HRTEM experiments on cross‐section samples indicate that the interfacial zone between iron and AlGaAs is limited to <1.5 nm in thickness. X‐ray emission spectroscopy showed the presence of Al atoms in an FeAl‐like environment at the interface, and the existence of wrong bonds and point defects. The estimated width of the perturbed interface (2.0 ± 0.5 nm) is in agreement with the HRTEM results. Copyright © 2003 John Wiley & Sons, Ltd.     

Polarization of coherent synchrotron radiation from an electron beam rotating in a plasma

After eliminating reflections from the walls of the plasma container, we observed polarization of the coherent synchrotron radiation from a relativistic electron beam rotating in a plasma. Several features of the polarization agree well with calculations based on the single particle synchrotron radiation theory. A particular polarization ratio (Fig. 3) does not, however. We deduce from this direct diffraction of the radiation by the beam electrons. This is strong evidence for beam-particle bunches of size cm. Also, there must be some absorption of the extraordinary wave to account for the observations. We suggest a way to apply these results to measure the pitch angle of the beam.Work supported by Army Research Office.     

激光通道传输热特性对远场光束质量的影响

 通过仿真计算分析了激光在光束控制系统通道内传输所产生的热效应及其对远场光束质量的影响。激光传播由近轴波方程描述，用快速傅里叶变换技术求解；激光热效应引起的流场密度变化采用完全Navier-Stokes方程计算。计算给出了不同波长、不同吸收系数条件下的远场光斑情况。计算结果表明，在典型的工作条件和状态下，较高能量激光在光束控制系统通道内产生的热效应影响不容忽视，它会明显降低远场目标处的能量集中度，增大光斑的发散。     

神光-Ⅱ装置三倍频实验中靶场单元技术的改进

 主要介绍为了满足神光-Ⅱ高功率激光装置三倍频光（351nm，3ω）的物理实验要求，靶场三倍频模拟光源和瞄准监视系统两个主要单元技术的改进，即三倍频模拟光源由基频光（1 053nm，3ω）通过腔外的KTP+BBO晶体倍频获得，再经八路分光系统和主激光耦合；瞄准监视系统由透射式光学系统改进为反射式光学系统，避免原系统存在较大的色差，提高瞄准精度。     

狭缝光栅自由立体显示器立体可视区域的研究

提出了反映观察区域某一点是否是合适的立体观察点立体图像质量因子的概念.根据狭缝光栅自由立体显示器的结构和工作原理并应用几何光学知识,分析得出了立体图像质量因子的计算公式,并给出了立体显示器的立体图像质量因子的计算结果.通过定义立体图像质量因子的阈值,得到狭缝光栅自由立体显示器的立体可视区域.     

Ce∶KNSBN晶体中光扇效应的响应时间特性研究

以单束光入射Ce∶KNSBN晶体,系统研究了不同入射光波长下,Ce∶KNSBN晶体中光扇效应的响应时间随入射光强度及光入射角的变化情况.结果显示,相同的入射光强度及光入射角下,入射光波长较短时,光扇效应到达稳态的时间较短.相同的入射光强度下,随光入射角的增大,响应时间先减小后增大,但不同波长入射光下,最小值对应的光入射角不同,入射光波长为532 nm时,响应时间最小值对应的θ为15°;入射光波长为632.8 nm时,对应的θ为15.5°.同时研究发现,入射光强度逐渐增大的过程中,响应时间在逐渐减小.     

波束开角对多普勒测频结果的影响*

具有不同波束开角的声学多普勒测速设备未标定的测速结果存在偏差。基于水底椭圆散射模型研究了波束开角对声学多普勒测速结果的影响,对提高声学测速性能具有实际意义。水底椭圆散射模型下,足印上不同方位传播损失和散射强度存在差异,导致频谱不对称,测频结果偏小。利用不对称系数量化频谱不对称程度,若波束开角增大,方位不对称系数随之增大,测频偏差增大,推导了波束开角导致的测频偏差解析式。分析仿真和外场试验数据测频结果可知,不同多普勒频移下测频偏差和理论计算值相符,不同波束开角下实际测频偏差与理论公式计算的测频偏差均随波束开角增大而增大。