Observation of radially polarized terahertz radiation generated by a sub-picosecond electron beam

The fundamental property of radially polarized terahertz radiation, which is axial symmetry of the polarization state in the radial direction, was measured with a Schottky diode detector and with a terahertz camera and wire-grid linear polarizer. Radially polarized terahertz radiation was generated from coherent transition radiation using a 30-MeV sub-picosecond electron beam. Bow-tie intensity distributions, aligned along the polarization direction, were clearly observed with the terahertz camera and could be rotated by changing the direction of the linear polarizer. The measured intensity distribution agreed with the calculated value. A video of the data can be found online.     

The influence of Au-nanoparticles presence in PDMS on microstructures creation by ion beam lithography

3D microstructures in pure poly(dimethylsiloxane) (PDMS) and PDMS with embedded Au nanoparticles were prepared by ion beam lithography without any further etching. Two mega-electron volts helium and 10 MeV oxygen ions were used for ion microstructuring. Parallel lines of 1 mm in length and 10 μm in thickness were fabricated for investigation of the effect of the nanoparticles presence in the polymer on the surface morphology of the created microstructures. The created microstructures were checked by optical microscope. Infrared (IR) spectrometry was used to study the effect of the ions type and fluence on the chemical changes of the material. Atomic force microscopy was used for the fine detail study as well as for checking the microstructure quality. Analysis revealed an increased radiation resistance of the nanocomposite compared to the pure PDMS. Shrinkage is proportional to the fluence, but the maximum value for both materials is limited by saturation. 3D microstructure in modified PDMS obtained at the same irradiation condition as pure PDMS is characterized by its smaller height. Obtaining the microstructure in nanocomposite of the same height as in pure PDMS by increasing the fluence can be impossible due to saturation of shrinkage and/or radiation-induced heating of the material.     

Effects of acid etching on the structure of PtNi catalyst and total exposed active sites

The integration technology of hydrogen preparation–hydrogen storage not only can utilize hydrogen energy efficiently but also can improve the selectivity of the electrode maximally. In the present work, the structure and composition of the PtNi catalyst was characterized by X-ray diffraction (XRD); and its electrochemical properties, morphology, and surface binding energy were analyzed by cyclic voltammetry (CV) and linear scanning voltammetry (LSV), scanning electron microscopy equipped with energy-dispersive spectrometry (SEM-EDS), and X-ray photoelectron spectroscopy (XPS), respectively. The effects of different acid etching treatments (e.g., etching time, etchant concentration, and etching temperature) on the structure and surface active sites were investigated by the orthogonal experiment. The experimental results reveal that after etching with 0.5 mol/L of perchloric acid for 0.5 h at 60°C, the electrode weight loss of the PtNi catalyst is mainly attributed to the large loss of Ni atoms in film layer. This results in the reduced alloy phase in film layer and the appearance of Pt characteristic diffraction peak. The relative content of Pt on the surface of the film electrode increases significantly, and the total number of active sites also increases correspondingly. The binding energy of Pt4f_7/2 decreases by 0.19 eV, and the number of active sites involved in hydrogen release decreases, indicative of the reduced promotion effect of the PtNi catalyst on hydrogen release.     

Formation of H3+ in Collisions of H2+ with H2 Studied in a Guided Ion Beam Instrument

In order to study collisions between ions and neutrals, a new Guided Ion Beam (GIB) apparatus, called NOVion, has been assembled and tested. The primary purpose of this instrument is to measure absolute cross sections at energies relevant for technical or inter- and circumstellar plasmas. New and improved results are presented for forming H₃⁺ in collisions of H₂⁺ with H₂. Between 0.1 eV and 2 eV, our measured effective cross sections are in good overall agreement with most previous measurements. However, at higher energies, our results do not show the steep decline, recommended in the standard literature. After critical evaluation of all experimental and theoretical data, a new analytical function is proposed, describing properly the dependence of the title reaction on the collision energy up to 10 eV.     

Enhanced Photochromism of Diarylethene Induced by Excitation of Localized Surface Plasmon Resonance on Regular Arrays of Gold Nanoparticles

Localized surface plasmon resonance (LSPR) excitation on the photochromic reaction of a diarylethene derivative (DE) was studied by surface enhanced Raman scattering (SERS). UV and visible light irradiations transform reversibly DE between open-form (OF) and closed-form (CF) isomers, respectively. A mixture of PMMA and DE (either OF or CF isomer) was spin-coated onto gold nanorods (GNRs) arrays, designed by electron beam lithography, with two localized surface plasmon resonances (LSPR) at distinct wavelengths, due to their anisotropy. The photochromic reaction rates from CF to OF isomers, under LSPR excitation, were monitored from SERS spectral changes under different polarizations, on the same GNR substrate to compare the effect of LSPR field strength. It appears that the photoisomerization rate was faster when LSPR was excited with the polarization parallel to the GNR long axis. The present results highlight a potential genuine mechanism, from near field LSPR excitation, involved in the photochromic enhancement of diarylethene photochromes.     

基于支座反力影响线曲率差分的等截面连续梁损伤识别方法

为了实现仅采用损伤状态信息对等截面连续梁进行损伤识别,通过推导三跨不等跨连续梁在移动荷载作用下的支座反力影响线,发现支座反力影响线求曲率并作差分后的曲线在损伤位置会发生突变,基于该现象提出了一种损伤定位方法,进一步建立了损伤程度计算方法,可对损伤程度进行较精确的定量。通过一三跨连续梁和一四跨连续梁工程实例的仿真分析,证明了支座反力影响线曲率差分指标损伤定位和相应的损伤程度定量方法对等截面连续梁损伤识别具有可行性。     

大气环境下的钢筋混凝土桥梁时变可靠度分析

为了探究钢筋混凝土桥梁抗力退化对桥梁可靠性能的影响,综合考虑一般大气环境下混凝土强度、钢筋强度、混凝土与钢筋黏结性能的降低,建立普通钢筋混凝土桥梁的抗力退化时变模型,分析规范车辆荷载作用的桥梁时变可靠度。研究结果表明,(1)一般大气环境下,桥梁抗力随着服役时间的增加而减小,其中钢筋强度退化对桥梁抗力的影响最大,其次是钢筋与混凝土黏结性能降低,而混凝土强度退化对桥梁抗力的影响相对较小; (2)桥梁可靠指标随着服役时间的增加而减小,密集行车占比越大,桥梁承载能力失效的概率就越大;非平稳车载作用下的桥梁可靠指标小于平稳车载,桥梁需要维修补强的时间比平稳车载提前; (3)多梁式简支梁桥在建造时应该提高边梁的安全储备,在管养时可以采取限载措施进行干预。     

Analysis of Organotin Compounds via a Thermabeam® LC–MS Interface

Selected organotin compounds, relating to antifouling paints, have been analysed using a particle beam interface system designed for use on liquid chromatography–mass spectrometry (LC–MS) instruments. The resultant mass spectra matched those obtained from conventional electron-impact (EI) techniques, and consistent data over several injections and different elution times were obtained. Data obtained from tributyltin, dibutyltin, monobutyltin, triphenyltin and diphenyltin (each as the chlorides) are presented. This interface has been shown to maintain sample and therefore spectral integrity for these compounds and is of potential use in further investigations relating to organotin environmental pollution.     

工作气压对电子束沉积ZrO2薄膜折射率和聚集密度的影响

采用电子束蒸发的方法,用石英晶体振荡法监控薄膜的蒸发速率,在不同工作气压下制备了ZrO2薄膜样品.在相调制型椭圆偏振光谱仪和分光光度计上对样品的光谱特性进行了测试.根据波长漂移的理论,计算出薄膜的聚集密度.结果表明,随着工作气压的降低,薄膜的聚集密度和折射率都随之增大.