A novel ion selective membrane potentiometric sensor for direct determination of Fe(III) in the presence of Fe(II)

A new PVC membrane potentiometric sensor that is highly selective to Fe(III) ions was prepared by using 2-[(2-hydroxy-1-propenyl-buta-1,3-dienylimino)-methyl]-4-p-tolylazo-phenol [HPDTP] as a suitable carrier. The electrode exhibits a linear response for iron(III) ions over a wide concentration range (3.5 × 10⁻⁶ to 4.0 × 10⁻²) with a super Nernstian slope of 28.5 (±0.5) per decade. The electrode can be used in the pH range from 4.5 to 6.5. The proposed sensor shows fairly a good discriminating ability towards Fe³⁺ ion in comparison to some hard and soft metals such as Fe²⁺, Cd²⁺, Cu²⁺, Al³⁺ and Ca²⁺. It has a response time of <15 s and can be used for at least 2 months without any measurable divergence in response characteristics. The electrode was used in the direct determination of Fe³⁺ in aqueous samples and as an indicator electrode in potentiometric titration of Fe(III) ions.     

Synthesis, Crystal and Magnetic Structures of the Sodium Ferrate (IV) Na4FeO4 Studied by Neutron Diffraction and Mössbauer Techniques

The alkali sodium ferrate (IV) Na₄FeO₄ has been prepared by solid-state reaction of sodium peroxide Na₂O₂ and wustite Fe_1−xO, in a molar ratio Na/Fe=4, at 400°C under vacuum. Powder X-ray and neutron diffraction studies indicate that Na₄FeO₄ crystallizes in the triclinic system P−1 with the cell parameters= a=8.4810(2) Å, b=5.7688(1) Å, c=6.5622(1) Å, α=124.662(2)°, β=98.848(2)°, γ=101.761(2)° and Z=2. Na₄FeO₄ is isotypic with the other known phases Na₄MO₄ (M=Ti, Cr, Mn, Co and Ge, Sn, Pb). The solid solution Na₄Fe_xCo_1−xO₄ exists for x=0-1 and we have followed the evolution of the cell parameters with x to determine the lattice parameters of the triclinic cell of Na₄FeO₄. A three-dimensional network of isolated FeO₄ tetrahedra connected by Na atoms characterizes the structure. This compound is antiferromagnetic below T_N=16 K. At 2 K the magnetic cell is twice the nuclear cell and the magnetic structure is collinear (μ_Fe=3.36(12) μ_B at 2 K). This black compound is highly hygroscopic. In water or on contact with the atmospheric moisture it is disproportionated in Fe³⁺ and Fe⁶⁺. The Mössbauer spectra of Na₄FeO₄ are fitted with one doublet (δ=− 0.22 mm/s, Δ=0.41 mm/s at 295 K) in the paramagnetic state and with a sextet at 8K. These parameters characterize Fe⁴⁺ high-spin in tetrahedral FeO₄ coordination.     

Thermal Analysis of Fe(III) Complexes with Salicylaldehyde Semi-, Thiosemi- and S-methylisothiosemi-carbazones

The paper describes the results of differential thermal analysis of the octahedral Fe(III) complexes of the general formula [Fe(HLⁿ)₂]Cl and Fe(HL³)L³, as well as of the corresponding ligands H₂Lⁿ (H₂Lⁿ — tridentate salicylaldehyde semi thiosemi- and S-methylisothiosemi-carabazones with n=1, 2 and 3 respectively). The decomposition of the complexes involving sulphur-containing ligands (H₂L² and H₂L³) starts with sulphur elimination. In case of the complexes [Fe(HL²)]Cl and [Fe(HL³)]Cl sulphur evolves independently, whereas with Fe(HL³)L³ it is eliminated within the SCH₃ group. In the former case, sulphur elimination takes place at the same temperature for both complexes. The change in the coordination mode, being a consequence of the replacement of O by S, has no essential effect on thermal stability of the coordination polyhedron. The complexes involving ONN coordination, realized with the H₂L³ ligand, exhibit a comparatively highest thermal stability of the coordination polyhedron.This revised version was published online in November 2005 with corrections to the Cover Date.     

Fe3+/V5+/TiO2复合纳米微粒光催化性能的研究

采用溶胶凝胶法制备了Fe^3 /V^5 /TiO2复合纳米微粒作为光催化剂。光降解反应结果表明，其掺杂催化剂Fe^3 /V^5 /TiO2的光催化活性明显提高。光电化学研究显示，铁离子可以成为电荷陷阱，促进空穴的界面传递反应。适量钒离子掺杂使TiO2电极的光电流升高，导带中电子浓度的增大，加快了界面的电子传递反应。共掺杂催化剂中，Fe^3 、V^5 分别提供了空穴与电子的陷阱，同时加快了电子与空穴的界面传递反应，从 更有效地提高光催化活性。双组份共掺杂为提高TiO2光催化活性提供新的途径。     

Fe—Silicalite—2催化剂表面CO2加氢反应性能的研究

研究了Ｆｅ／Ｓｉｌｉｃａｌｉｔｅ－２催化剂ＣＯ２加氢低碳烯烃反应性能，利用ＣＯ２－ＴＰＤ，ＣＯ２／Ｈ２－ＴＰＳＲ和ＣＯ／Ｈ２－ＴＰＳＲ表征手段，考察了铁含量及ＭｎＯ助剂对Ｆｅ／Ｓｉｌｉｃａｌｉｔｅ－２催化剂ＣＯ２吸附脱附及加氢反应性能的影响，表明随铁含量增加可提高催化剂对ＣＯ２的吸附能力，有利于提高ＣＯ２加氢反应的转化率。     

The crystal structure of Fe(SeO2OH)(SeO4)·H2O

Summary The crystal structure of the hydrothermally synthesized compound Fe(SeO₂OH) (SeO₄) · H₂O was determined by single crystal diffraction methods:a=8.355(2) Å,b=8.696(2) Å,c=9.255(2) Å, =93.72(1)°,V=670.95 ų;Z=4, space group P2₁/c,R=0.029,R _w=0.027 for 2430 independent reflections (sin /0.76 Å^–1). Isolated FeO₅(H₂O)-octahedra share five corners with [SeO₂OH] and [SeO₄] groups to form sheets parallel to (100). These sheets are interconnected via hydrogen bonds only.

---

Die Kristallstruktur von Fe(SeO₂OH)(SeO₄)·H₂O

Zusammenfassung Die Kristallstruktur der hydrothermal dargestellten Verbindung Fe(SeO₂OH) (SeO₄)·H₂O wurde mittels Einkristallbeugungsmethoden bestimmt:a=8.355(2) Å,b=8.696(2) Å,c=9.255(2) Å, =93.72(1)°,V=670.95 ų;Z=4, Raumgruppe P2₁/c,R=0.029,R _w=0.027 für 2 430 unabhängige Reflexe (sin / 0.76 Å^–1). Isolierte FeO₅(H₂O)-Oktaeder teilen fünf Ecken mit [SeO₂OH]- und [SeO₄]-Gruppen, wobei sie Schichten parallel (100) bilden. Diese Schichten sind nur über Wasserstoffbrücken miteinander verbunden.

     

Survey of ligand field parameters of strong field d complexes obtained from the g matrix

Using a newly proposed approach involving an internally consistent set of equations, the ligand field parameters Δ/ξ, V/ξ and k are obtained from literature values of the g matrix for strong field d⁵ systems of various conformations in which |Δ/ξ|≤10. Qualitative analysis of the observed results is done using the Angular Overlap Model, AOM.     

Comparative evaluation of Fe(III) reducing power-based antioxidant capacity assays in the presence of phenanthroline, batho-phenanthroline, tripyridyltriazine (FRAP), and ferricyanide reagents

The chemical diversity of antioxidants in complex matrices such as plant extracts makes it difficult to separate and quantify antioxidants from these solutions. Therefore it is desirable to establish methods that can measure the total antioxidant capacity (TAC) levels directly from plant extracts. Iron(III)-based TAC assays, especially the most widely used FRAP (ferric-reducing antioxidant power), play an important role in this regard. However, many problems have been reported in the application of the FRAP assay, the most serious one being the incomplete oxidation of a number of antioxidants during the time protocol of the assay. Thus, six different ferric ion-based total antioxidant capacity (TAC) assays have been comparatively tested, modified, and improved so as to obtain more sensitive and precise results for complex mixtures, namely: 1,10-phenanthroline (o-phen) method (with incubation), batho-phenanthroline method (with incubation), original FRAP method, modified FRAP method (with incubation), original ferricyanide method, and modified ferricyanide method (with incubation). Two new assays in this regard (i.e., o-phen and batho-phen) have been established, and the existing assays (FRAP and ferricyanide) have been modified so as to let the oxidation reactions of antioxidants reach completion. The molar absorptivity for a variety of antioxidants was highest for modified FRAP, batho-phen, and original FRAP methods. The absorption maximum wavelength shifted batochromically to a higher extent for modified ferricyanide, FRAP, and batho-phen procedures, decreasing the possibility of interferences due to organics absorbing in the near-UV range of the visible spectrum where most antioxidant assays are performed. The linear concentration ranges were shown to be further extended and linear correlation coefficients improved with respect to the most widely used ferric-based assay, FRAP. Of the six assays tested and developed, only the modified ferricyanide procedure gave high intercept values and low addivitity of TAC values of constituents in complex mixtures, requiring further attention of method optimization. Thus, it was shown that the most widely used FRAP could be effectively modified, and o-phen, batho-phen, and ferricyanide methods constitute cheaper alternatives to FRAP under certain conditions, with partly improved molar absorptivity (and thus sensitivity) for antioxidants, lower intercept values (and higher precision), broader linear range (and higher flexibility), and better additivity of TAC values of antioxidant constituents in mixtures.     

Electronic state of Fe used as Mössbauer probe in the perovskites LaMO3 (M=Ni and Cu)

For the first time a comparative study of rhombohedral LaNiO₃ and LaCuO₃ oxides, using ⁵⁷Fe Mössbauer probe spectroscopy (1% atomic rate), has been carried out. In spite of the fact that both oxides are characterized by similar crystal structure and metallic properties, the behavior of ⁵⁷Fe probe atoms in such lattices appears essentially different. In the case of LaNi_0.99Fe_0.01O₃, the observed isomer shift (δ) value corresponds to Fe³⁺ (3d⁵) cations in high-spin state located in an oxygen octahedral surrounding. In contrast, for the LaCu_0.99Fe_0.01O₃, the obtained δ value is comparable to that characterizing the formally tetravalent high-spin Fe⁴⁺(3d⁴) cations in octahedral coordination within Fe(IV) perovskite-like ferrates. To explain such a difference, an approach based on the qualitative energy diagrams analysis and the calculations within the cluster configuration interaction method have been developed. It was shown that in the case of LaNi_0.99Fe_0.01O₃, electronic state of nickel is dominated by the d⁷ configuration corresponding to the formal ionic “Ni³⁺-O²⁻” state. On the other hand, in the case of LaCu_0.99Fe_0.01O₃ a large amount of charge is transferred via Cu-O bonds from the O:2p bands to the Cu:3d orbitals and the ground state is dominated by the d⁹L configuration (“Cu²⁺−O” state). The dominant d⁹L ground state for the (CuO₆) sublattice induces in the environment of the ⁵⁷Fe probe cations a charge transfer Fe³⁺+O⁻(L)→Fe⁴⁺+O²⁻, which transforms “Fe³⁺” into “Fe⁴⁺” state. The analysis of the isomer shift value for the formally “Fe⁴⁺” ions in perovskite-like oxides clearly proved a drastic influence of the 4s iron orbitals population on the Fe−O bonds character.