Use of Local Lagrange Interpolation for calculation of retention indices in linear temperature-programmed gas chromatrography

Summary The influence of the isothermal temperature, program rate, initial temperature and flow rate on retention indices was studied. The methods of Kováts, Van Den Dool and Local Lagrange Interpolation are compared. Ten experimental measurements were carried out on a capillary column coated with OV-101 stationary phase.     

Trivariate Polynomial Natural Spline for 3D Scattered Data Hermit Interpolation

Consider a kind of Hermit interpolation for scattered data of 3D by trivariate polynomial natural spline,such that the objective energy functional (with natural boundary conditions) is minimal.By the s...     

含中介值ξ-η-ζ等式的证明方法

介绍含三个中介值ξ-η-ζ等式的几种证明方法,并结合实例加以说明.     

A thermodynamic and dynamic subgrid closure model for two‐material cells

A general and robust subgrid closure model for two‐material cells is proposed. The conservative quantities of the entire cell are apportioned between two materials, and then, pressure and velocity are fully or partially equilibrated by modeling subgrid wave interactions. An unconditionally stable and entropy‐satisfying solution of the processes has been successfully found. The solution is valid for arbitrary level of relaxation. The model is numerically designed with care for general materials and is computationally efficient without recourse to subgrid iterations or subcycling in time. The model is implemented and tested in the Lagrange‐remap framework. Two interesting results are observed in 1D tests. First, on the basis of the closure model without any pressure and velocity relaxation, a material interface can be resolved without creating numerical oscillations and/or large nonphysical jumps in the problem of the modified Sod shock tube. Second, the overheating problem seen near the wall surface can be solved by the present entropy‐satisfying closure model. The generality, robustness, and efficiency of the model make it useful in principle in algorithms, such as ALE methods, volume of fluid methods, and even some mixture models, for compressible two‐phase flow computations. Copyright © 2013 John Wiley & Sons, Ltd.     

On the signal degradation induced by the interpolation and the sampling rate reduction in aeroacoustics hybrid methods

Taking place within more extensive work that focuses on hybrid methods in aeroacoustics, the present study is devoted to the data transfer operations that are to be performed between two stages of a hybrid calculation. More precisely, the article focuses on two typical operations that usually accompany such data transfer, which are (i) the sampling rate reduction and (ii) the interpolation of the unsteady perturbations to be transmitted from one stage to the other. First part of the paper analyzes the two main issues of such operations, which are the spuriousing and the aliasing phenomena. For doing so, the usual notions of the interpolation theory are revisited before they are synthesized within an original approach. The here proposed formalism allows to understand better both the spuriousing and the aliasing phenomena, as well as to accurately predict the impact of the latter on the data to be transmitted in terms of signal degradation. Second part of the paper provides an illustration and a validation of these theoretical developments via a direct application to a typical aerodynamic noise problem (aeroacoustic emission by a 2D cylinder cross flow). There, it is further shown how the here proposed formalism can help in improving aeroacoustics hybrid calculations by predicting (and thus possibly minimizing) the bias to be induced on the acoustic extrapolation stage because of the aliasing and/or spuriousing effects inherited from the sampling rate reduction and/or interpolation of CFD data—which is likely to occur in any hybrid scenario. Copyright © 2012 John Wiley & Sons, Ltd.     

Approximating exponential and logarithmic functions using polynomial interpolation

This article takes a closer look at the problem of approximating the exponential and logarithmic functions using polynomials. Either as an alternative to or a precursor to Taylor polynomial approximations at the precalculus level, interpolating polynomials are considered. A measure of error is given and the behaviour of the error function is analysed. The results of interpolating polynomials are compared with those of Taylor polynomials.     

Kinematics of layered reinforced-concrete planar beam finite elements with embedded transversal cracking

In this work crack formation and development is addressed and implemented in a planar layered reinforced-concrete beam element. The crack initiation and growth is described using the strength criterion in conjunction with exact kinematics of the interlayer connection. In this way a novel embedded-discontinuity beam finite element is derived in which the tensile stresses in concrete at the crack position reaching the tensile strength will trigger a crack to open. Since the element is multi-layered, in this way the crack is allowed to propagate through the depth of the beam. The cracked layer(s) will involve discontinuity in the cross-sectional rotation equal to the crack-profile angle, as well as a discontinuity in the position vector of the layer’s reference line. A bond–slip relationship is superimposed onto this model in a kinematically consistent manner with reinforcement being treated as an additional layer of zero thickness with its own material parameters and a constitutive law implemented in the multi-layered beam element.     

A coupled immersed boundary‐lattice Boltzmann method with smoothed point interpolation method for fluid‐structure interaction problems

The immersed boundary‐lattice Boltzmann method has been verified to be an effective tool for fluid‐structure interaction simulation associated with thin and flexible bodies. The newly developed smoothed point interpolation method (S‐PIM) can handle the largely deformable solids owing to its softened model stiffness and insensitivity to mesh distortion. In this work, a novel coupled method has been proposed by combining the immersed boundary‐lattice Boltzmann method with the S‐PIM for fluid‐structure interaction problems with large‐displacement solids. The proposed method preserves the simplicity of the lattice Boltzmann method for fluid solvers, utilizes the S‐PIM to establish the realistic constitutive laws for nonlinear solids, and avoids mesh regeneration based on the frame of the immersed boundary method. Both two‐ and three‐dimensional numerical examples have been carried out to validate the accuracy, convergence, and stability of the proposed method in consideration of comparative results with referenced solutions.     

Design of sextuple-mode triple-ring HTS UWB filter using two-round interpolation

A single-stage ring resonator capable of introducing six modes within the ultra-wideband (UWB) passband is presented. The sextuple-mode resonator consists of three rings and three sets of stepped-impedance open stubs. Based on this sextuple-mode resonator, a UWB filter fed by the interdigital-coupling line (ICL) is designed. And we propose a two-round interpolation method to obtain the filter's initial dimensions. The designed filter is fabricated on a double-sided YBCO/MgO/YBCO high-temperature superconducting (HTS) thin film for demonstration. The experimental results show that this UWB filter produces eight resonances in the passband eventually, which effectively improves the in-band reflection and the band-edge steepness. Moreover, the upper stopband performance is enhanced due to the transmission zeros (TZs) generated by the stepped-impedance open stubs and the ICL structure. The measured good performance verifies the practicability of the two-round interpolation approach, which can also be extended to other odd-even-mode filter designs.     

An immersed smoothed point interpolation method (IS‐PIM) for fluid‐structure interaction problems

An immersed smoothed point interpolation method using 3‐node triangular background cells is proposed to solve 2D fluid‐structure interaction problems for solids with large deformation/displacement placed in incompressible viscous fluid. In the framework of immersed‐type method, the governing equations can be decomposed into 3 parts on the basis of the fictitious fluid assumption. The incompressible Navier‐Stokes equations are solved using the semi‐implicit characteristic‐based split scheme, and solids are simulated using the newly developed edge‐based smoothed point interpolation method. The fictitious fluid domain can be used to calculate the coupling force. The numerical results show that immersed smoothed point interpolation method can avoid remeshing for moving solid based on immersed operation and simulate the contact phenomenon without an additional treatment between the solid and the fluid boundary. The influence from information transfer between solid domain and fluid domain on fluid‐structure interaction problems has been investigated. The numerical results show that the proposed interpolation schemes will generally improve the accuracy for simulating both fluid flows and solid structures.