A plasma-fluid model for EHD flow in DBD actuators and experimental validation

A numerical method to simulate plasma induced electrohydrodynamic flow is proposed in this study. The numerical model consists of three components. Firstly, a potential module to simulate temporal potential and electric field generated in the ionized fluid. Secondly, a plasma module to simulate plasma development and charge particle densities. Finally, a fluid module to simulate the flow affected by the body forces induced by the movement of the charged particles. Fluid flow is modeled using modified predictor-corrector strategy as proposed in the marker and cell method. The velocity field was corrected to achieve incompressible flow by calculating pressure correction factors, considered in all cells. Numerical convergence and time sensitivity analysis were carried to confirm grid independence and determine an efficient time step for simulations. Numerical computations are validated by comparing with experimental results of discharge currents and current densities. They were found to be in very good agreement thus providing an extensive validation. Furthermore, quiescent flow over a dielectric barrier discharge actuator is simulated in the this study, using the proposed plasma-fluid model, to model flow evolution and resolve temporal flow features for detailed analysis. The streamline and vorticity plots were analyzed and compared with experimental results, and flow results were found to be in-line with the experiments.     

Structural response of stiffened plates in similitude under a turbulent boundary layer excitation

In structural dynamics, similitude laws usually deal with simple configurations as thin flat plates with point forces. Only recently, few papers have analyzed stiffened shells or stochastic pressure loads.This research activity extends the applicability of some similitude laws, developed for thin flat plates under a turbulent boundary layer load, to ribbed plates forced by the same wall pressure fluctuations.The work addresses the problem of designing a scaled experimental test-article and, successively, of re-modulating the measured data in order to get the structural response of an original (unscaled) configuration.Due to the complexity of the structural domain, the design of a scaled configuration leads to a distorted similitude. Then, a simple approach, to circumvent the distortion effects, is proposed.     

Experimental and numerical study on instability structure of the supersonic mixing layer (Mc = 0.5)

The parameters of instability wave of supersonic mixing layer(Mc=0.5,M1=3.5/M2=1.4) are measured by flow visualization and calculated by means of two-dimensional direct numerical simulaitons of the compressible Navier-Stokes equations.In both cases of the mixing layer with harmonic disturbance or not,the comparative results indicate that the wavelength of the two-dimensional wave is equal to the vortex spacing in the streamwise direction because the difference between them is less than 1%.However,the measur...     

Study of plasma technology for silicate refractory melts production

Herein the fundamentally new unit for production of silicate refractory melts with the use of high-concentrated heat fluxes is considered. Mathematical model describing temperature fields in skull layer in the process of the plasma flow interaction with the particles of refractory silicate material has been developed. Typical numerical results of temperature distribution in various sections of the skull layer are presented. Numerical and experimental data have been compared, and their fair agreement is obtained. The work was financially supported by RF President (Grant No. MK 1110.2008.8).     

Two-dimensional problem of two Coulomb centers at small intercenter distances

We use analytic methods to analyze the discrete spectrum for the problem (Z₁eZ₂)₂ in the united-atom limit (R ≪ 1) and obtain asymptotic expansions for the quantum defect and energy terms of the system (Z₁eZ₂)₂ at small intercenter distances R up to terms of the order O(R⁶). We investigate the effect of the dimensionality factor on the energy spectrum of the hydrogen molecular ion H ₂ ⁺ . __________ Translated from Teoreticheskaya i Matematicheskaya Fizika, Vol. 148, No. 2, pp. 269–287, August, 2006.     

Formation of the intermediate semiconductor larger for the Ohmic contact to silicon carbide using Germanium implantation

By formation of an intermediate semiconductor layer (ISL) with a narrow band gap at the metallic contact/SiC interface, this paper realises a new method to fabricate the low-resistance Ohmic contacts for SiC. An array of transfer length method (TLM) test patterns is formed on N-wells created by P⁺ ion implantation into Si-faced p-type 4H-SiC epilayer. The ISL of nickel-metal Ohmic contacts to n-type 4H-SiC could be formed by using Germanium ion implantation into SiC. The specific contact resistance ρ_c as low as 4.23× 10^-5~Ωega \cdotcm² is achieved after annealing in N₂ at 800~°C for 3~min, which is much lower than that (>900~°C) in the typical SiC metallisation process. The sheet resistance R_sh of the implanted layers is 1.5~kΩega /\Box. The technique for converting photoresist into nanocrystalline graphite is used to protect the SiC surface in the annealing after Ge⁺ ion implantations.     

光学玻璃加工破坏层研究及粗磨、精磨、抛光工序加工余量的合理匹配

本文通过用五种散粒磨料（碳化硅）、五种固着磨料（金刚石）对八大类常用光学玻璃进行加工，用扫瞄电子显微镜观察其表面形貌，用抛测法测出其破坏层深度，得出一系列破坏层的深度数值，从而找出破坏层与磨料之问的函数关系。以破坏层的绝对深度为依据，得出光学加工中精磨、抛光工序的加工余量的合理匹配值。     

Effective spectral emissivity measurements of superalloys and YSZ thermal barrier coating at high temperatures using a 1.6μm single wavelength pyrometer

A method which employs an integrating sphere and a single-wavelength (1.6 μm) pyrometer for measuring the spectral effective emissivities of superalloys in the temperature range (=650–1050°C) is described. The spectral effective emissivities for five superalloys, namely, MARM-247, MARM-509, CMSX-4, Inconel-718, N-155 and two René-N6 samples coated with YSZ thermal barrier coating were measured. Correcting the pyrometer measurements for the variations in the object emissivity would reduce the uncertainty in the temperature measurements to <±1%.     

交流和纳秒脉冲Ar/H2O介质阻挡放电聚丙烯材料表面亲水改性对比研究

为了提高等离子体对聚合物材料表面处理的应用效果,优化亲水处理的条件,研究了交流和纳秒脉冲氩气介质阻挡放电（DBD）中添加适量H₂O,对聚丙烯（PP）亲水改性的处理效果。利用电学和光学诊断方法,系统地对比了交流DBD和纳秒脉冲DBD的放电特性,结果表明,纳秒电源驱动DBD具有更高的放电瞬时功率,更好的放电均匀性和更高的能量效率。通过测量不同水蒸气含量下DBD的OH发射光谱强度,确定了PP材料亲水性处理中H₂O添加的最优含量。利用交流和纳秒脉冲电源驱动DBD分别对PP材料进行亲水改性的处理,测量了不同条件下改性处理后的表面水接触角,并利用原子力显微镜（AFM）和傅里叶红外光谱（FTIR）分别对处理前后PP材料的表面物理形貌和表面化学成分进行分析。结果发现,经DBD处理后PP材料的水接触角明显降低,表面粗糙度明显增大,表面的亲水性含氧基团,羟基（−OH）和羰基（C=O）的数量大幅增加。相比交流电源,纳秒脉冲DBD处理的改性效果更好,其处理后的材料表面水接触角,比交流DBD处理的低5°左右,表面粗糙度也有所提升。而水蒸气的加入可使PP材料的表面水接触角进一步减小4°左右,表面粗糙度明显提升。研究结果为优化DBD聚合物材料表面改性实验条件及处理的效果提供了重要的参考依据。