固体介质间隔层激光标准具性能的影响因素研究

针对固体介质间隔层的镀膜标准具, 以1 064 nm激光镀膜标准具为例, 首先研究了反射膜堆数对反射带宽、基底厚度以及对自由光谱区的影响:标准具的带宽随着膜层堆数增加而减小, 自由光谱区随着基板厚度的增加而减小;其次研究了基底误差对标准具中心波长定位和透过率的影响, 通过定量数值计算证明了基底误差可通过标准具的使用角度补偿;针对典型的H(LH)^m/Substrate/(HL)^mH和L(LH)^m/Substrate/(HL)^mL两个膜系结构, 研究了入射激光发散角对标准具中心波长偏移、通带半宽度、中心波长透过率和最大透过率的影响。随着激光发散角的增加, 中心波长向短波方向移动, 通带半宽度、中心波长透过率和最大透过率呈现下降的趋势, 并且第二个膜系结构的标准具性能优于第一个膜系结构的标准具。     

JPEG图像压缩对测量类图像的影响

在JPEG图像压缩的量化过程中,丢弃了部分高频信息,使图像的清晰度下降。通过对频谱的对照分析和对实际图像进行实验后表明,JPEG图像压缩对测量和处理结果的影响与原图像的特点、取样方式、滤波过程和压缩算法有关。经摄像机和图像卡获得的图像,其压缩比可达到10;经扫描仪获得的图像,其压缩比可达到6;经数码相机获得的图像,其压缩比可达到6～8;对特定的医学图像、晶相图像等来说,利用图像的特征构造最优匹配的JPEG压缩量化表,其压缩比可达到10。采用合适的压缩比和改进的压缩方法,图像的细节损失可以控制在较小的范围内,基本上不影响检测类图像的边界提取、分割、尺寸测量时的处理结果。     

复数滤波器在数字全息图处理中的应用

数字全息图在微电路检测、粒度分析、透明场测量等小孔径、小视场对象测量和细胞观测等显微测量方面有着广泛的应用前景。根据离轴数字全息图的频谱特点,提出采用复数滤波器,利用计算机及相关算法对离轴数字全息图进行滤波,消除其零级及共轭像,同时可以得到全息图的相位分布。讨论了复数滤波器的设计方法,给出了实验结果。为数字全息图的压缩、再现和相息图制作提供了方便。     

基于Fibonacci序列准周期结构的小角度低通空间滤波器

利用常规材料构造了Fibonacci序列准周期结构,运用传输矩阵法研究了该结构的空间传输特性,并基于该结构优良的空间传输特性设计了小角度低通空间滤波器.数值模拟结果表明,该小角度空间滤波器的角域带宽可通过改变序列的结构类型和序列数来调谐,其调谐规律为:随着Fibonacci序列F(m,1)中m值的增加,对应空间滤波器的角域带宽减小;随着序列数的增大,对应角域带宽也减小.在调谐的基础上,还可通过改变构成准周期结构的介质折射率参量来精确调节其角域带宽.相比于基于超材料的小角度空间滤波器而言,基于Fibonacci序列的小角度空间滤波器制备更简单,且有望应用于新一代的高功率激光系统中.     

Viscous flow in a mixed compression intake

Numerical simulation of the flow in a two‐dimensional mixed compression intake is carried out by solving unsteady viscous compressible equations using a stabilized finite element method. The effect of bleed in starting/unstarting of the intake and controlling the buzz instability is investigated in detail. Higher bleed leads to an increase in the ability of the intake to sustain larger back‐pressure for stable operation. The amount of bleed and its location is varied to understand its effect on the performance of the intake. Two kinds of unsteady oscillations are observed: ‘little’ and ‘big’ buzz. The frequency of the both kinds of buzz oscillations is found to be super‐harmonic of the fundamental acoustic frequency of intake modeled as an open‐closed organ pipe. The frequency as well as amplitudes of the big buzz cycles is larger than those of the little buzz. The little‐ and big‐buzz are found to occur for low‐ and high‐subcritical state of the intake and are very similar to Ferri and Dailey criteria, respectively. Buzz is eliminated when relatively high bleed is implemented, both, upstream and downstream of the throat. The effect of rate of change of back‐pressure on the start/unstart of the intake is investigated. Two situations are considered. The first case is that of an intake where the back‐pressure remains below the critical value. It is found that the intake remains started if the change in back‐pressure is gradual. However, it unstarts if the back‐pressure is changed relatively rapidly. The second set of simulations is an attempt to model the situation where the back‐pressure at the exit of the intake exceeds the critical value and a logic is incorporated in the feed back loop of the fuel modulation to start the intake. Low rate of change of pressure is unsuccessful in starting the intake. Relatively high rates result in either a quick starting of the intake or a slow unstart. Copyright © 2010 John Wiley & Sons, Ltd.     

A note on compressive limiting for two‐material flows

In this short note we describe a simple extension to the multi‐material shock‐capturing algorithm presented in (J. Comput. Phys. 2007; 223 :262–297) that can be used to maintain sharp material interfaces. The method takes the form of an artificial compression which is designed so that the material indicator jumps across only a few cells but which does not excite physical instabilities in the flow. The advantages of the approach include its simplicity and flexibility in that it provides a parameter that effectively determines the captured interface thickness. Copyright © 2009 John Wiley & Sons, Ltd.     

字符串匹配算法在DNA序列比对中的应用

高通量测序技术的飞速发展让生物信息领域迎来了大数据时代。新技术在提供海量生物遗传信息的同时,也给分析这些数据带来了新的挑战。DNA序列比对是信息分析流程中的关键步骤,为后续的变异检测提供序列比对信息。2015“深圳杯”数学建模夏令营B题以DNA序列比对为研究课题,希望参赛学生给出序列快速比对的最佳方案。本文简要点评了各参赛队伍的解答情况,然后介绍了现有DNA序列比对软件中用到的算法和数据结构。     

Micro-CT参数对骨质疏松性椎体压缩性骨折术后复发的预测价值

本研究探讨Micro-CT参数对骨质疏松性椎体压缩性骨折(OVCF)患者术后复发的预测价值。选取OVCF患者127例,根据术后6个月骨折复发情况分为复发组(n=41)与未复发组(n=86)。患者均接受Micro-CT检查,对比两组Micro-CT参数,即骨体积分数(BV/TV)、骨小梁厚度(Tb.Th)、骨小梁间隙(Tb.Sp)、结构模型指数(SMI),以及骨密度(BMD)、骨矿含量(BMC),分析各参数与BMD、BMC及术后复发相关性,并评价各参数对术后复发的预测价值。结果显示,复发组骨体积分数(BV/TV)、骨小梁厚度(Tb.Th)低于未复发组,骨小梁间隙(Tb.Sp)、结构模型指数(SMI)高于未复发组(P<0.05);BV/TV、Tb.Th与骨密度(BMD)、骨矿含量(BMC)呈正相关,Tb.Sp、SMI与BMD、BMC呈负相关(P<0.05);将年龄、BMD、BMC等其他因素控制后,BV/TV、Tb.Sp、Tb.Th、SMI与OVCF术后骨折复发显著相关(P<0.05);BV/TV、Tb.Sp、Tb.Th、SMI联合预测OVCF术后骨折复发的曲线下面积(AUC)最大,为0.888(P<0.05)。提示Micro-CT参数在OVCF患者中呈异常表达,采用Micro-CT检查可为临床预测OVCF术后骨折复发提供科学指导。     

Anisotropic compressive behavior of rigid PVC foam at strain rates up to 200 s−1

The elevated strain rate compressive response of closed-cell polyvinyl chloride (PVC) foam at various densities is investigated. Two loading directions, (i.e., parallel and perpendicular to foam rise direction) were considered to investigate structural anisotropy. The elevated strain rates tests (up to 200 s⁻¹) were performed using a customized drop tower device. Engineering stress/strain behavior, energy dissipation, and maximum stress capacity were obtained for each density and compared against each other. Except for the lowest density of 45 kg/m³, strain rate effects were clearly observed through increased compressive strength and plateau stress when loading in the foam rise direction. The strain rate effect is more evident at higher densities. However, no significant strain rate effect was observed when loading perpendicular to the foam rise direction. Scanning electron microscopy (SEM) analysis showed that plastic hinges are the primary deformation mechanism for PVC foam cells. An analytical model has been calibrated using the experimental results and successfully predicted the mechanical response of the foam. Shape anisotropy has been measured employing the SEM images. The analytical approach was also able to predict the foam's anisotropic mechanical response.