Ferrocenylethynyl‐Terminated Azobenzenes: Synthesis,Electrochemical, and Photoisomerization Studies

Ferrocenylethynyl‐terminated derivatives 8 – 12 have been synthesized and characterized by electrochemistry and UV/Vis spectroscopy. The electrochemical and photophysical studies indicate that the electronic communication in ferrocenylethynyl‐substituted derivatives is strongly influenced by the substituted position of the ferrocenylethynyl moiety. In situ electrochemical oxidation or chemical oxidation caused a characteristically weak ligand‐to‐metal charge‐transfer (LMCT) band to appear at 700–1000 nm. Subsequent electrochemical reduction or chemical reduction recovered the most of the original curve and the color of the solution as well. Among the derivatives, compound 8 exhibits the highest cis/trans molar ratio (64:36) in the photostationary state (PSS) upon light irradiation at 365 nm. Compound 8 exhibits excellent fatigue resistance and reversibility under several repeated reversible isomerization cycles.     

1,2,4‐Triazole Links and N‐Azo Bridges Yield Energetic Compounds

Triazole links and polynitropyrazole rings give rise to compounds with energetic properties. These materials were fully characterized by NMR and infrared spectroscopy, elemental analysis, and differential scanning calorimetry (DSC). In addition, the structures of compounds 5 and 8 were confirmed by single‐crystal X‐ray diffraction analysis. Detonation properties, calculated from heats of formation and experimental densities, thermal stabilities, and impact and friction sensitivities support the potential use of these materials for explosive applications.     

A Mononuclear Uranium(IV) Single‐Molecule Magnet with an Azobenzene Radical Ligand

A tetravalent uranium compound with a radical azobenzene ligand, namely, [{(SiMe₂NPh)₃‐tacn}U^IV(η²‐N₂Ph₂^.)] ( 2 ), was obtained by one‐electron reduction of azobenzene by the trivalent uranium compound [U^III{(SiMe₂NPh)₃‐tacn}] ( 1 ). Compound 2 was characterized by single‐crystal X‐ray diffraction and ¹H NMR, IR, and UV/Vis/NIR spectroscopy. The magnetic properties of 2 and precursor 1 were studied by static magnetization and ac susceptibility measurements, which for the former revealed single‐molecule magnet behaviour for the first time in a mononuclear U^IV compound, whereas trivalent uranium compound 1 does not exhibit slow relaxation of the magnetization at low temperatures. A first approximation to the magnetic behaviour of these compounds was attempted by combining an effective electrostatic model with a phenomenological approach using the full single‐ion Hamiltonian.     

铜催化烯烃氰烷基化成环合成含氰吲哚酮

发展一种简单、高效的铜催化活泼烯烃氰烷基化成环合成吲哚酮的方法。 在CuI/DTBP(叔丁基过氧化物)催化作用下, N-芳基丙烯酰胺类化合物与α-氰基偶氮试剂发生自由基环化反应, 高效地合成了一系列含α-氰基季碳中心的吲哚酮, 并探讨了其反应机理。 该方法底物适用范围较广、反应体系温和, 催化体系廉价。     

Holographic investigations of azobenzene-containing low-molecular-weight compounds in pure materials and binary blends with polystyrene

This paper reports on the synthesis and the thermal and optical properties of photochromic low-molecular-weight compounds, especially with respect to the formation of holographic volume gratings in the pure materials and in binary blends with polystyrene. Its aim is to provide a basic understanding of the holographic response with regard to the molecular structure, and thus to show a way to obtain suitable rewritable materials with high sensitivity for holographic data storage. The photoactive low-molecular-weight compounds consist of a central core with three or four azobenzene-based arms attached through esterification. Four different cores were investigated that influence the glass transition temperature and the glass-forming properties. Additional structural variations were introduced by the polar terminal substituent at the azobenzene chromophore to fine-tune the optical properties and the holographic response. Films of the neat compounds were investigated in holographic experiments, especially with regard to the material sensitivity. In binary blends of the low-molecular-weight compounds with polystyrene, the influence of a polymer matrix on the behavior in holographic experiments was studied. The most promising material combination was also investigated at elevated temperatures, at which the holographic recording sensitivity is even higher.     

Solvent-polarity-tunable dimeric association of a fullerene (C60)-N,N-dimethylaminoazobenzene dyad: modulated electronic coupling of the azo chromophore with a substituted 3D fullerene

The tunable self-assembly of a fullerene (C(60))-N,N-dimethylaminoazobenzene (DPNME) molecular system as a function of solvent polarity in THF/water binary solvent is reported. Gradual increase of the volume fraction of the nonsolvent water in a 1×10(-5) M THF solution of DPNME at a mixed dielectric constant ε(mix)≈42 resulted in initial redshifting of the (1)(π→π(*)) absorption band, which signified the 1D head-to-tail or J-type arrangement of the DPNME molecular system. Further increase in the solvent polarity to ε(mix)≈66 evidenced formation of an antiparallel head-to-tail or H-type molecular arrangement in conjunction with the J-aggregates, thereby establishing a solvent-polarity-dependent dynamic equilibrium between the monomer ? J-aggregate ? H-aggregate. The controlled aggregation was governed by the synergetic effect of intermolecular donor-acceptor interaction between the electron-deficient fullerene ring and the electron-rich N,N-dimethylamino-substituted aromatic ring; typically, van der Waals and π-π interactions between the molecules constituting a pair of dimers were envisaged. An agreement between the semiempirically calculated drastically reduced oscillator strength of the DPNME H-dimer in the antiparallel configuration (0.69 vs. 1.29 in the monomeric DPNME) and the experimental electronic absorption spectra beyond ε(mix)=66 further strengthened this assignment to the hitherto forbidden antiparallel H-dimer. Complementing the above, the periodicity of molecular self-assembly dictated a monoclinic unit cell in the single-crystal XRD packing pattern with a C2/c space group; the molecules packed laterally with mutual interdigitation with the donor (E)-N,N-dimethyl-4-(p-tolyldiazenyl)aniline (AZNME) parts in an antiparallel fashion (contrary to the usual expectation for H-aggregates) with strong inter- and intrapair van der Waals and π-π interactions between the constituent fullerene moieties. Unlike those of porphyrin/phthalocyanine bowl-like donor-initiated architectures, a rare class of DPNME dyadic supramolecular self-assemblies was realized with π-extended 2D fullerene networks, in which the linear geometry of the AZNME donor and the conformational rigidity of the fullerene acceptor played crucial roles.     

高效液相色谱-串联质谱法测定纺织品中的致癌芳香胺

建立了高效液相色谱-串联质谱法(LC/MS/MS)测定纺织品中致癌芳香胺的检测方法.纺织品中的偶氮染料在柠檬酸缓冲液中用连二亚硫酸钠还原为芳香胺,用硅藻土提取还原液中的芳香胺,用乙醚洗脱,浓缩至近干后用甲醇定容.使用液相色谱-串联质谱进行测定,色谱柱为XTerra MS C18柱,流动相为甲醇和0.025 mol/L乙...     

Radical grafting from carbon fiber surface: graft polymerization of vinyl monomers initiated by azo groups introduced onto the surface

This paper describes the radical graft polymerizations of vinyl monomers from carbon fiber surface initiated by azo groups introduced onto the fiber surface. The carbon fiber used in this experiment was the polyacrylonitrile type. The introduction of azo groups onto the carbon fiber surface was achieved by the reaction of 4,4'-azobis (4-cyanopentanoic acid) with isocyanate groups which were previously attached onto the surface by the treatment of the fiber with tolylene 2,4-diisocyanate. The amount of surface azo groups introduced onto nitric acid-treated carbon fiber was determined to be 0.60 x 10^-5 mol 9^-1 by nitrogen analysis. The radical graft polymerization of methyl methacrylate (MMA) was tried. Though the thermal polymerization of MMA proceeded slightly in the absence or in the presence of untreated carbon fiber, the rate of the polymerization was considerably low. In contrast, the graft polymerization of MMA was initiated in the presence of the carbon fiber having surface azo groups, and part of resultant poly(MMA) grafted onto the surface. The percentage of grafting increased with an increase in polymerization time and reached 42.8% after 24 h. The graft polymerizations of other monomers, such as styrene, vinyl acetate, and acrylic acid, were also initiated by the surface azo groups attached onto the carbon fiber, and the corresponding polymer effectively grafted onto the surface.