直线感应加速器中聚束磁场的数值计算方法

为了准确模拟出直线感应加速器中聚束磁场的值,首先利用单积分法计算出理想情况下的聚束磁场的值,再进一步用磁路分析的方法考虑直线感应加速器的加速腔中匀场环对聚束磁场的影响,然后推导出一组偏离角度与磁场分量相关的公式。将最终得到的聚束磁场分量与直线感应加速器模型结合起来,采用粒子模拟的方法来模拟电子束在加速段中的输运过程,并对结果加以分析。     

偏振显示及椭圆偏振光测量实验

以单束正交线偏振光为光源,利用角向偏振显示器,采用CCD摄像机进行图像采集,利用Matlab软件进行图像处理,设计了一种由He-Ne激光器、角向偏振显示器组成的偏振光偏振方向显示系统,并研究了其角度特性.实验结果表明:系统在起偏器的起偏角分别为0°、90°、180°、270°、360°时,角向偏振显示器偏振显示角度的测量准确度分别为0.480°、0.168°、0.528°、0.421°、0.340°,测量精确度分别为0.208°、0.576°、0.660°、0.603°、0.466°,测量数据拟合曲线的线性相关系数为0.999.结合1/4波片,检偏器和分光比为50:50的分束器,构建了椭圆偏振光测量系统,完成了椭圆偏振光测量实验,椭圆率为0.198.     

Surface instability of orthotropic laminated materials under compression

The piecewise-homogeneous material model and the three-dimensional linearized theory of stability with the assumption of small subcritical strains are used to study the surface buckling of orthotropic and transtropic laminates. A plane problem is formulated, and characteristic equations are derived. A solution is found for a specific transtropic material with different orientations of the isotropy axis __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 7, pp. 64–72, July 2006.     

Surface and interface electronic properties of group III-nitride heterostructures

For group III-nitrides with wurtzite structure the presence of fixed polarization interface charges yields new challenges in order to understand and control Schottky barrier heights, band offsets and 2D confinement in heterostructure FETs. In this short review experimental results obtained by in situ photoemission spectroscopy on MBE AlGaN/GaN heterostructures grown on 6H–SiC are discussed, with emphasis on the presence and interplay of surface electronic states. Schrödinger–Poisson calculations are performed to get the complete band scheme at the selected heterojunctions. Results on the polarity dependence of Pt/GaN Schottky barrier values from the literature are also discussed.     

实轴上具一阶奇性解的特征奇异积分方程

把实轴上具一阶奇性解的特征奇异积分方程及其相联方程的求解化为实轴上具一阶奇性解的Riemann边值问题讨论，对后者在提法、奇点的对待和典则函数的理解方面作了与传统有所不同的处理，对前者通过对解和可解条件的简化及等价性的讨论，得到解和可解条件的简化形式及推广的Noether定理。     

三轴运动模拟转台的结构对称性与动力学计算

本文给出了三轴运动模拟转台动力学相互作用的计算公式，并讨论了它的结构对称性问题。     

Contrasting confocal with defocusing microscale spatially offset Raman spectroscopy

The study compares and contrasts conventional confocal Raman microscopy/spectroscopy (CRM) with a recently developed micrometer scale defocusing spatially offset Raman spectroscopy (micro‐SORS), a method providing a new analytical capability for investigating non‐destructively the chemical composition of subsurface, micrometer‐scale‐thick diffusely scattering layers at depths beyond the reach of CRM. Because of close similarities between the two techniques and comparable embodiment of the instrumentations, but radically different interpretations of data, it is crucially important to recognise which type of method is pertinent to a specific measurement. The distinction comes principally from the nature of sample, whether turbid (micro‐SORS measurement) or transparent (CRM measurement) on the spatial scale of the axial (z‐)scan of the measurement. Which type of sample one deals with may not always be easily recognisable with micro‐scale thick layers, and the study therefore also presents a simple method for suggesting whether CRM or micro‐SORS methodology applies. This test relies on an axial (z‐)scan performed through the sample in both the positive and negative directions from the normal, imaged sample surface position using conventional CRM instrument. The absence or presence of symmetry or asymmetry of the intensity profiles of measured Raman signals around the imaged sample surface position as a function of sample axial displacement then suggests which interpretation could apply. The study paves a way for the development of micro‐SORS as a widely applicable analytical tool deployable on conventional Raman microscopes. Copyright © 2015 John Wiley & Sons, Ltd.     

A Technique for Identification of The Principal Central Axis of Inertia in an Inhomogeneous Rigid Body

A technique is proposed to identify the principal central axis of inertia in a joint-suspended inhomogeneous rigid body from its vertical revolution. The problem is reduced to synchronizing the revolution of the body with the revolution of a fictitious mathematical pendulum     

惯性系统三轴综合测试转台总体设计若干问题的探讨

本文从框架形式、总体布局、轴承的种类和布置方式等方面，讨论了惯性系统三轴综合测试转台总体设计中的若干问题，从设计、制造和使用等方面阐述了各种总体布局形式的优缺点，并提出了自己的相应看法，最后讨论了目前惯导测试设备研究领域需要研究的关键技术。     

多体动力学程序切断铰的处理方法

多体系统动力学从非树系统派生出树系统的计算需要进行切断铰的处理。切断铰约束方程的形成是进行多体系统程序编写时的重要部分,其处理过程复杂,需要一定的技巧。本文引入了约束正交补轴的概念,详细介绍了几种典型(旋转铰、万向节、棱柱铰、旋转棱柱组合铰)切断铰位移约束方程、速度约束方程、加速度约束方程的形成方法,并给出了详细的程序化过程,该方法适用于任何类型的切断铰。最后给出相应算例,结果表明本文的方法能快速、正确地形成切断铰约束方程。