Transformations of iodine species inside elliptical channels of AlPO4‐11 crystals at low temperature: a Raman study

Raman spectra of iodine species confined in one‐dimensional elliptical channels of AlPO₄‐11 (AEL) crystals have been studied from room temperature down to −196 °C. As temperature decreases, thermal fluctuations of individual iodine molecules confined in AEL channels are slowed down and they prefer to rotate to channel axis direction, which increases the population of iodine molecules along channel axis (i.e., lying molecules and chains). Such temperature‐driven orientation transformation of iodine molecules is found to be reversible upon heating up to room temperature. The experimental observations are in good agreement with our theoretical simulations by molecular dynamics on low density iodine‐filled AEL crystals. We thus provide a new way to modulate the orientation of iodine molecules in nanochannels, which may have implications in low‐temperature‐sensitive nanoscale devices. Copyright © 2015 John Wiley & Sons, Ltd.     

First principles calculation of the opto-electronic properties of (110) growth axis SiGe superlattices

Using two versions of the first principles full potential linear muffin-tin orbitals method (FPLMTO) which enable an accurate treatment of the interstitial regions, the electronic and optical properties of (110) growth axis Si/SiGe superlattices are investigated. A comparative study with (001) growth axis superlattices is made. In particular, it is found that the bottom of the conduction band (CB) is closer to Γ$\Gamma$ in the (110) system but the optical activity is not enhanced. Furthermore, the absorption spectra of the superlattices are calculated and are found to be quite different from those of bulk Si and Ge but fairly close to their average.     

Characteristics of Friedel pairs and diffraction contrast tomography with non‐perpendicular rotation axis

The characteristics of Friedel pairs in diffraction contrast tomography (DCT) are studied in the condition that the rotation axis of the sample is not exactly perpendicular to the incident X‐ray direction. For the rotation axis approximately aligned along the vertical direction, the Friedel pairs close to the horizontal plane are insensitive to the non‐perpendicularity of the rotation axis, and can be used to refine the sample‐to‐detector distance and X‐ray energy, while the Friedel pairs close to the vertical direction are sensitive to the non‐perpendicularity of the rotation axis, and can be used to determine the rotation axis orientation. The correct matching proportion of Friedel pairs decreases with increasing non‐perpendicularity of the rotation axis. A method of data processing considering rotation axis misalignment is proposed, which significantly increases the correct matching and indexing proportions of the diffraction spots. A pure aluminium polycrystalline sample is investigated using DCT at beamline 4W1A of Beijing Synchrotron Radiation Facility. Based on the analysis of Friedel pairs, the sample‐to‐detector distance and X‐ray energy are refined to be 8.67 mm and 20.04 keV, respectively. The non‐perpendicular angle of the rotation axis is calculated to be 0.10°. With these refined geometric parameters, the matching proportion of the spatial position of diffraction spots is 90.62%. Three‐dimensional reconstruction of the sample with 13 grains is realised using the algebraic reconstruction technique. It is demonstrated that the precise correction of the orientation of the sample rotation axis is effective in DCT suffering from rotation axis misalignment, and the higher accuracy in determining the rotation axis is expected to improve the reconstruction precision of grains.     

基于非同步替代光谱定标的地表下垫面影响分析

对760nm附近的氧气吸收带,选用植被、枯萎植被、人工地物、沙地和雪地五种典型地表类型,基于模拟数据进行非同步替代光谱定标方法的误差分析,比较不同地表类型得到的光谱定标准确度,为高光谱成像仪的非同步替代光谱定标提供定标图像选择策略.结果表明:运用两种光谱匹配方法——光谱角度匹配和欧氏距离法得到的定标误差基本一致;730~800nm的地表反射率曲线标准差在0.05nm以内时,定标误差集中在±0.5nm范围内;人工地物类型中个别地物如橄榄绿光泽涂料和植被大面积覆盖的图像数据不适合用于非同步替代光谱定标.     

QoS enhancement in OFDM based systems under transceiver impairments

Broadband wireless systems generally use orthogonal frequency division multiplexing (OFDM) with link adaptation (LA) to achieve high throughput while meeting bit error rate (BER) constraint. OFDM systems are known to be affected by non-linearity of high power amplifier (HPA) at transmitter, carrier frequency offset (CFO), symbol timing offset (STO) and channel estimation error at the receiver. The delay in feedback of channel state information (CSI) further affects the performance of LA procedures. The focus of this work is on performance analysis in presence of simultaneous affect of all these impairments on LA based OFDM systems. The results are found to be useful for threshold readjustment which is essential for successful implementation of LA scheme to counter the effects of change in operating conditions from ideal to as listed above.     

激光指示器光轴调校技术

利用反射式光学系统对激光指示器的光轴进行了调校。提出了激光指示器及观瞄装置的光轴校正方案,并建立了调校装置。该装置由离轴抛物面反射镜、十字靶标、背景光源、图像采集装置及其它附件组成。对调校装置的测量精度进行了标定和计算。结果表明,该装置的测量精度可达到0.05mrad。利用该装置对激光指示器的光轴进行了调校,并给出了系统示意图和测试效果。     

915 nm宽条形半导体激光器输出特性

为了研究温升对915 nm宽条形应变量子阱半导体激光器输出特性的影响,搭建了基于半导体制冷片(TEC)的双向温控平台对其进行了测试。首先,改变激光器的外表面温度,测量其在不同注入电流时的光功率和波长,并利用CCD相机测量其慢轴发散角。然后,利用计算机仿真软件对激光器的工作状态进行稳态模拟,从而获得了其对应的热分布情况,通过将模拟得到的数据与实验测量的结果进行比较,获得了两者趋于一致的结论:当热功率从2.1 W升高至20.0 W时,慢轴发散角从2.6°增大至5.0°,同时波长发生红移,热透镜焦距减小;激光器波长随温度变化关系的系数约为0.4 nm/℃,器件热阻为1.5 K/W。因此,为了同时获得高的输出功率和稳定的输出波长,有必要将激光器外表面温度精确控制在某一数值,否则波长将会发生漂移;此外,在设计制作高功率半导体激光器时,通过适当增加条宽并采用散热良好的封装结构,可以减小对慢轴发散角的影响。     

载机平台光电转塔目标定位的仿真算法

目标定位是光电转塔典型功能和任务之一,对其定位精度的考量也是转塔作战技术指标之一,针对该问题,从理论和仿真角度进行了分析。分析目标定位中用到的坐标系及其相互转换关系,给出光电转塔视轴反演、有源目标定位、无源目标定位的算法流程,通过仿真实验加以验证,考虑了定位过程中可能的随机误差来源,并分析是否采用均值滤波及其对定位结果的影响,最后通过Monte-Carlo分析计算了定位精度。分析结果表明:1）有源定位比无源定位的精度高,在仿真假设条件下,精度约提高1倍;2）均值滤波后,定位精度有较大提升（约提高15倍）;3）18 km距离时典型无源定位精度在80%置信度条件下约为39.4 m;4）统计直方图反映出80%置信度CEP半径及最大误差距离随载机位置、姿态、转塔视轴等（体现在目标载机距离上）不同参数的变化结果。     

顶空-气相色谱-质谱联用法同时测定紫外光固化胶印油墨中27种溶剂残留

建立了同时测定紫外光固化（UV）胶印油墨中27种溶剂残留（挥发性有机化合物,VOCs）的顶空-气相色谱-质谱联用（HS-GC-MS）法。将UV胶印油墨样品模拟印刷制成一定面积、厚度的试样,在紫外灯下烘烤1 min,经80℃、45 min静态顶空后,通过VOC专用毛细管柱分离和质谱检测,外标法定量。27种VOCs均呈现良好的线性关系,相关系数（R²）均≥0.9950;方法的检出限（LODs,S/N=3）为0.001~0.310 mg/m²,定量限（LOQs,S/N=10）为0.003~0.920 mg/m²;样品的平均加标回收率为80%~108%,相对标准偏差（RSD）<6%（n=6）。该方法制样便捷,灵敏度高,精密度好,准确度高,将其应用于实际UV胶印油墨样品的检测,取得了良好效果。     

基于仿生设计的风力发电机叶片力学性能的实验研究

根据风力机的基本理论和相似理论设计了一个翼型为SG6050,半径为1m的小型风力机叶片。运用结构仿生学原理,对所设计的风力机叶片进行了仿生物中轴铺层设计。通过模态实验与应变实验,比较了传统设计与仿生设计两种不同风力机叶片的力学性能。模态实验结果表明,基于仿生设计的叶片的前六阶固有频率比传统叶片的前六阶固有频率减少约8％;两种叶片的固有频率均满足设计要求;仿生设计的叶片几乎不会改变叶片的动态特性。而应变实验表明,仿生设计的叶片在各种工况下的应变均大于传统的叶片约10％～20％。新设计的叶片具有较好的柔性,有效减小了叶片的应力,提高了叶片的疲劳寿命。