食品药品检验机构仪器设备计量信息的标准化管理

建立食品药品检验机构仪器设备计量的信息化规范管理方法。总结了传统人工计量管理的弊端,提出计量信息化管理的流程,将计量信息化管理分为计量计划申报、计量应急申报、计量信息登记、计量结果确认4个步骤,详细介绍了4个步骤中信息管理的主要内容及注意事项。建立食品药品检验机构仪器设备计量信息化管理的标准化规程,可以为仪器设备计量信息的动态监管提供支持。     

Improved Synthesis of the ORL Antagonist 1-[(3R,4R)-1-Cyclooctylmethyl-3-ethoxycarbonyl-4-piperidinyl]-3-ethyl-1,3-dihydro-2H-benzimidazol-2-one (J-113397)

A practical synthesis of optically pure 1-[(3R,4R)-1-cyclooctylmethyl-3-ethoxycarbonyl-4-piperidinyl]-3-ethyl-1,3-dihydro-2H-benzimidazol-2-one (J-113397) was developed that avoids the use of chiral columns.     

苯酚(醌)与烯烃的不对称[3+2]环化反应: 手性二氢苯并呋喃的合成进展

二氢苯并呋喃结构单元广泛存在于具有良好生物活性和药用价值的天然产物之中, 因而引起了有机合成化学家和药物化学家们的关注. 针对该结构单元所包含的C2和C3邻二立体中心的对映选择性构建, 也是目前有机合成方法学研究的挑战性问题之一. 在众多解决方案中, 以苯酚(醌)与烯烃为底物, 具体采用催化不对称和手性辅剂诱导的[3+2]环化两种方式, 可以构建具有光学活性的二氢苯并呋喃结构单元. 本综述将不同类型的手性催化剂和手性辅剂进行分类梳理, 介绍了近年来不对称[3+2]环化反应的发展, 并重点剖析其中涉及的立体选择性控制. 同时, 简要介绍了该关键方法在二氢苯并呋喃天然产物合成中的应用. 为了启发更加高效和普适性的新催化体系出现, 最后总结和展望了不对称[3+2]环化反应的发展趋势.     

An axial flow cyclone to remove nanoparticles at low pressure conditions

In this study, the axial flow cyclone used in Tsai et al. (2004) was further tested for the collection efficiency of both solid (NaCl) and liquid (OA, oleic acid) nanoparticles. The results showed that the smallest cutoff aerodynamic diameters achieved for OA and NaCl nanoparticles were 21.7 nm (cyclone inlet pressure: 4.3 Torr, flow rate: 0.351 slpm) and 21.2 nm (5.4 Torr, 0.454 slpm), respectively. The collection efficiencies for NaCl and OA particles were close to each other for the aerodynamic diameter ranging from 25 to 180 nm indicating there was almost no solid particle bounce in the cyclone. The 3-D numerical simulation was conducted to calculate the flow field in the cyclone and the flow was found to be nearly paraboloid. Numerical simulation of the particle collection efficiency based on the paraboloid flow assumption showed that the collection efficiency was in good agreement with the experimental data with less than 15% of error. A semi-empirical equation for predicting the cutoff aerodynamic diameter at different inlet pressures and flow rates was also obtained. The semi-empirical equation is able to predict the cutoff aerodynamic diameter accurately within 9% of error. From the empirical cutoff aerodynamic diameter, a semi-empirical square root of the cutoff Stokes number, , was calculated and found to be a constant value of 0.241. This value is useful to the design of the cyclone operating in vacuum to remove nanoparticles.     

基于RST-QFD-Bayes的新型装甲装备通用质量特性评价指标体系构建研究

针对新型装甲装备通用质量特性评价指标体系难以确定的问题,在明确评价指标体系构建原则的基础上,结合新型装甲装备特点,确定了通用质量特性初始评价指标及指标筛选要求,运用QFD将新型装甲装备通用质量特性需求映射为评价指标筛选要求,采用粗糙集理论(Rough Set Theory,RST)确定了指标筛选重要度,考虑到关联度的不确定性及多个专家估计值的平均值和估计值的波动程度,将贝叶斯理论引入关系矩阵的确定中,用区间数确定了关联度,进行了评价指标筛选,构建了新型装甲装备通用质量特性评价指标体系,为新型装甲装备通用质量特性评价奠定了基础。     

一种宽能谱多球中子谱仪能量响应的MC模拟

利用蒙特卡罗程序FLUKA模拟计算了聚乙烯慢化球和辅助材料慢化球对低能中子到高能中子的响应函数曲线。结果表明,对纯聚乙烯球来说,随着聚乙烯层厚度的增加,响应曲线峰逐步右移,峰值在高能区有所下降,对20 Me V以上的中子,无论纯聚乙烯球的尺寸有多大,其响应均下降到很低的程度;对辅助材料慢化球来说,中子能量小于1 Me V时,辅助材料慢化球与聚乙烯慢化球的响应曲线相似,但当中子能量大于20 Me V时,中子与辅助材料层发生(n,xn)反应,慢化球的响应呈显著上升趋势。分析计算结果,最终能够确定宽能谱多球中子谱仪的尺寸组合。     

Nickel‐Catalyzed C?H Alkylations: Direct Secondary Alkylations and Trifluoroethylations of Arenes

A versatile nickel catalyst allowed for C H alkylations of unactivated arenes with challenging secondary alkyl bromides and chlorides. The high catalytic efficacy also set the stage for direct secondary alkylations of indoles as well as C H trifluoroethylations with ample substrate scope.     

NMR波谱仪集中优化管理模式

论述了核磁中心采用的相对集中管理模式.集中管理模式主要体现在上样辅助、中央供气、数据集中上传与下载3个方面.另外,还提出了未来可以从集中供高纯N2和LN22个方面进一步改善中心的集中管理模式,从而能够更好的优化测试效率和工作环境.     

Pandemic-Driven Development of a Medical-Grade,Economic and Decentralized Applicable Polyolefin Filament for Additive Fused Filament Fabrication

A polyolefin with certified biocompatibility according to USP class VI was used by our group as feedstock for filament-based 3D printing to meet the highest medical standards in order to print personal protective equipment for our university hospital during the ongoing pandemic. Besides the chemical resistance and durability, as well as the ability to withstand steam sterilization, this polypropylene (PP) copolymer is characterized by its high purity, as achieved by highly efficient and selective catalytic polymerization. As the PP copolymer is suited to be printed with all common printers in fused filament fabrication (FFF), it offers an eco-friendly cost–benefit ratio, even for large-scale production. In addition, a digital workflow was established focusing on common desktop FFF printers in the medical sector. It comprises the simulation-based optimization of personalized print objects, considering the inherent material properties such as warping tendency, through to validation of the process chain by 3D scanning, sterilization, and biocompatibility analysis of the printed part. This combination of digital data processing and 3D printing with a sustainable and medically certified material showed great promise in establishing decentralized additive manufacturing in everyday hospital life to meet peaks in demand, supply bottlenecks, and enhanced personalized patient treatment.     

新型对开门高低温动态试验箱研制

介绍了新型对开门高低温动态试验箱的研制过程,包括系统热负荷计算、复叠制冷循环系统的热力计算等。并根据系统的热力计算,进行了冷凝器和蒸发器的结构设计以及主要部件压缩机和通风机的设计选型。