Enhancement of electrical conductivity,director relaxation frequency and slope of electro-optical characteristics in the composites of single-walled carbon nanotubes and a strongly polar nematic liquid crystal

In the present work, single-walled carbon nanotubes (SWCNTs) were dispersed in a room temperature nematic liquid crystal 4-pentyl-4′-cyanobiphenyl at the concentration of 0.02 and 0.05 wt%. Differential scanning calorimetry and temperature-dependent dielectric studies suggest decrease in clearing temperature of the composite materials as compared to the pure material. Ionic conductivity increases by two orders of magnitude due to the dispersion of such a low concentration (0.05 wt%) of SWCNTs. Dielectric studies also show that the presence of the SWCNTs decreases the effective longitudinal as well as transverse components of the dielectric permittivity. For homeotropic aligned samples, a relaxation mechanism has been detected in the lower MHz region both for the pure as well as dispersed samples. Presence of SWCNTs increases the relaxation frequency corresponding to flip-flop motion of molecules around their short axes. From frequency-dependent dielectric studies, important dielectric parameters such as relaxation frequency, dielectric strength and distribution parameters have been determined. Electro-optical experiments show that the threshold voltage decreases and the steepness of the transmission voltage curve improves due to the dispersion of SWCNTs.     

用有限元自适网格控制结构应力分析的精度

本文涉及有限元结构应务分析精度控制的三个基本方面：１）自适应的有限元网格自动生成技术；２）有限元应力分析的误差估计：３）用单元尺寸场将误差分布用于形成新网格。     

自组惠斯登电桥测电阻中的误差及分析

通过分析惠斯登电桥测电阻的误差,提出改进实验方法提高灵敏度,减小测量误差.     

A detailed study through the focal region of near-threshold single-shot femtosecond laser ablation nano-holes in borosilicate glass

A detailed study of the morphology of nano-craters drilled in borosilicate glass by single shot femtosecond laser ablation near the ablation threshold has been performed by scanning electron microscopy, atomic force microscopy and scanning electron microscopy imaging after focused ion beam sectioning. The influence of the numerical aperture (NA = 0.4 and 0.8), the pulse energy (16 nJ < E_p < 600 nJ) and the position of the specimen surface into the focal region were systematically investigated, leading to nanometric or micrometric scales in every spatial dimension. The nanocrater’s size is not restricted by the diffraction limit but determined by the laser pulse stability and the material properties. If the beam is focused inside the glass, two craters are drilled, shaping very distinct morphologies. Their dimensions have been studied in details and different relationships have been proposed for the evolutions of the depths and of the various diameters of these craters as functions of the pulse energy, the numerical aperture and the position of specimen surface in the beam-material interaction region. It is suggested that the long, thin conical profile with very high aspect ratio of the secondary craters is due to a spontaneous reshaping of the beam which transforms the incoming Gaussian pulse into a Gaussian-Bessel pulse. As proposed in the developed model the geometry of the second craters seems to be connected with the one of the main craters.     

Low threshold laser cavities of two-dimensional photonic crystal line defect mode

Two-dimensional (2D) rod-type photonic crystal (PC) line defect waveguide (LDW) laser cavities based on three types of line defect modes with zero group velocity are studied by using finite-difference time-domain (FDTD) method. These laser cavities have high quality (Q) factor, better localization of light, non-uniform gain distribution and small overlap between gain medium and light field. Therefore, they have the advantages over conventional and air-bridge PC cavities with uniform gain, such as low threshold, single mode lasing and effectively avoiding thermal effect. From their comparison, one can find the mode at middle Brillouin zones (BZ) is the best one to be used as lasing mode. Its dynamic lasing process and lasing features are demonstrated by the numerical experiment where the FDTD method coupling Maxwell's equations with the rate equations of electronic population is used.     

ALD氧化铝单层膜1 064 nm激光损伤特性研究

 采用原子层沉积技术(atomic layer deposition,ALD)在熔石英和BK7玻璃基底上镀制Al2O3单层膜。利用小口径损伤在线测试平台对膜层的1 064 nm激光损伤特性进行了实验测量,获得膜层损伤阈值约为10.3 J/cm2,对比了其与BK7基底损伤阈值之间的差异;利用Nomarski显微镜和原子力显微镜分析讨论了损伤形态的特点,结果表明损伤主要表现为膜层脱落和基片小孔烧蚀,其中小孔深度集中在70 nm～95 nm范围;讨论了损伤发生的诱因,得出膜基界面可能存在吸收源先驱的推断。     

一种新的自动聚焦算法的研究

聚焦评价函数和极点搜索策略是自动聚焦的重要模块,直接影响聚焦的效果.为同时满足自动聚焦速度和精度上的要求,提出了一种新的自动聚焦算法.该算法综合了快速改进的灰度差分法和高精度小波变换法的优点,根据各阶段聚焦评价函数的梯度选择合适的评价函数和镜头移动步长,并且实现了从大步长快速粗扫到小步长精确细调的过渡.实验表明,与传统...     

Temperature effect on the threshold frequency of absorption in a quantum pseudodot

The threshold frequency of absorption in a quantum pseudodot under the influence of temperature and applied magnetic field is calculated. The threshold frequency of absorption is computed as a function of temperature and applied magnetic field. The linear and nonlinear dependence of the absorption threshold frequency on magnetic field and temperature has been showed. According to the results obtained from the present work, we find that the linear and nonlinear dependence of the absorption threshold frequency depends on used range of the temperatures and magnetic fields.     

Enhanced dielectric permittivity in poly (vinylidene) fluoride/multiwalled carbon nanotubes nanocomposite thin films fabricated by pulsed laser deposition

The fabrication of high quality thin films of poly (vinylidene fluoride) embedded with multiwalled carbon nanotubes using pulsed laser deposition technique is reported. The prepared films were characterized for structural, morphology and dielectric properties. The morphology analysis revealed uniform dispersion of multiwalled carbon nanotubes throughout the polymer matrix. X-ray diffraction results suggested that the poly (vinylidene fluoride) film is in amorphous phase while addition of multiwalled carbon nanotubes showed presence of crystalline peaks in the nanocomposites films. It was interesting to note that the nanocomposite films exhibits significant enhancement of the ferroelectric β-phase as evidenced by the X-ray diffraction and Fourier transform infrared spectroscopy results. The dielectric analysis shows a remarkable enhancement in the dielectric permittivity of nanocomposites with lower loss and conductivity level. The results can be attributed to the formation of minicapacitor network and relatively higher percolation threshold in the nanocomposites.     

On spatial contagion and multivariate GARCH models

We propose a method for defining and measuring spatial contagion between two financial markets via conditional copulas. Some theoretical results on monotonicity and asymptotic properties of Gaussian copulas with respect to conditioning are presented. Next, we combine the spatial contagion approach with time series models. We investigate which model from a large family of multivariate GARCH is the best tool for modelling spatial contagion. In an empirical study, we show that among models designed for general fit, a two‐step model fitting procedure reduces the ability to describe the contagion effect. This is a feature of copula‐GARCH models. Copyright © 2013 John Wiley & Sons, Ltd.