探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

On the factors affecting the enhanced resonance light scattering signals of the interactions between proteins and multiply negatively charged chromophores using water blue as an example

Electrostatic interactions of proteins, including bovine serum albumin (BSA), human serum albumin (HSA), γ-globulin (γ-IgG), α-chymotrypsin (Chy), lysozyme (Lys) and cellulase (Cel), with multiply negatively charged chromophores were investigated based on the measurements of the enhanced resonance light scattering (RLS) signals. Using triply negatively charged water blue (WB) as an example, the factors were discussed that affect the enhanced resonance light scattering signals of the interactions between proteins and the negatively charged chromophores. It was found that the enhanced RLS signals with the maximum light scattering peak at 346.0 nm in these interacting systems are strongly dependent on the isoelectric points of proteins and show adverse linear relationships with increasing ionic strength depending on the positive charges of the inorganic metal ions used to control the ionic strength of the medium, sufficiently disclosing that the electrostatic attraction performs an important role in the combination of proteins with WB. Linear responses were discovered between the enhanced RLS signals and the protein molecular weights (M_w), displaying the dimensions of scattered particles formed by proteins and WB make a key contribution to the RLS enhancements. An empirical equation is proposed which possibly displays the factors affecting the enhanced RLS signals of the interactions between proteins with negatively charged chromophores.     

基于非生物折叠体的分子识别

利用分子自组装的方法控制大分子量的线性有机分子的构象是物理有机化学一个富于挑战性的研究课题. 近年来, 化学家已经成功利用不同的分子内非共价键作用力如氢键和疏溶剂作用等诱导线性分子的折叠乃至螺旋构象的产生. 综述了近年来这种新的非生物二级结构形式在分子识别研究中的应用.     

全硅FER沸石上有机吸附物脱附行为的研究

运用热分析技术,研究吸附在体相和表面结构完美的单晶状疏水全硅FER沸石孔道中的有机化合物的脱附行为,测定亲和性指数AT值和负载量。所研究的吸附质为直链烷烃、直链烷基醇、直链烷基胺等,结果显示醇有较低的AT值,而直链烷烃有较高的AT值,胺类有最高的AT值。证明全硅FER沸石骨架对烷基、胺基呈现出强的"亲和性",而对羟基呈现出“憎性”。同时还发现吸附质的链长对脱附性质、AT值也有较大影响。     

ATR-FTIR study of Bacillus sp. and Escherichia coli settlements on the bare and Al2O3 coated ZnSe internal reflection element

FTIR-ATR has been used for understanding the interaction between bacteria and surfaces in the adsorption progress.     

Mg改性对Co/γ-Al2O3-TiO2催化燃烧丙烷性能影响

采用分步浸渍法制备了系列Mg改性的Co/γ-Al_2O_3-TiO_2催化剂,通过X射线衍射(XRD)、紫外可见漫反射光谱(DR-UV-vis)、N_2吸附-脱附(BET)、X射线光电子能谱(XPS)和H_2程序升温还原(H_2-TPR)等技术对催化剂进行表征,并考察了其对丙烷燃烧的催化性能。结果表明,Co在原始γ-Al_2O_3-TiO_2载体和Mg改性MgO/γ-Al_2O_3-TiO_2载体上均以Co_3O_4的形式存在;Mg掺入后与Al_2O_3作用形成MgAl_2O_4尖晶石,改善了载体的织构性质,提升了Co_3O_4在催化剂载体表面的暴露数量和分散程度。此外,MgAl_2O_4与Co_3O_4相互作用提升了Co_3O_4颗粒表面Co~(3+)/Co~(2+)和O_(ads)/O_(latt)的比例,并削弱了Co-O键键能,从而提升了其对丙烷的催化燃烧活性。当Mg负载量为15%(质量分数)时,在Co/MgO(15%)/γ-Al_2O_3-TiO_2催化剂上进行丙烷燃烧,丙烷90%转化率的温度比无Mg掺杂的Co/γ-Al_2O_3-TiO_2催化剂的降低了45℃,并且连续反应40 h其活性保持稳定。     

Internally contracted multiconfiguration-reference configuration interaction calculations for excited states

Summary The calculation of electronically excited states with the internally contracted multiconfiguration-reference configuration interaction (CMRCI) method is discussed. A straightforward method, in which contracted functions for all states are included in the basis, is shown to be very accurate and stable even in cases of narrow avoided crossings. However, the expense strongly increases with the number of states. A new method is proposed, which employs different contracted basis sets for each state, and in which eigensolutions of the Hamiltonian are found using an approximate projection operator technique. The computational effort for this method scales only linearly with the number of states. The two methods are compared for various applications.Dedicated in honor of Prof. Klaus Ruedenberg     

A hybrid approach combining energy density analysis with the interaction energy decomposition method

We propose a new analysis technique for characterizing molecular interactions that combines an energy decomposition scheme, such as the Kitaura-Morokuma decomposition method, with energy density analysis, which partitions the total energy of the system into atomic contributions. The combined scheme, termed Interaction-EDA, enables us to estimate the local contribution of interaction energy components, such as electrostatic, exchange, polarization, and charge transfer. The evaluation of the local interaction energy is rather important in large systems. For a numerical assessment, the Interaction-EDA method is applied to the process of CO adsorption on Si(100) - (2 x 1) surface.     

Dielectric studies of binary mixtures of n -propyl alcohol and ethylenediamine

Dielectric constant (ε’) and dielectric loss (ε") of n-propyl alcohol (PA), ethylenediamine (EDA) and their binary mixtures, for different mole fractions of ethylenediamine have been experimentally measured at 11.15 GHz microwave frequency. Values of density (ρ), viscosity (η) and square refractive index (n _D ² ) of binary mixtures as well as those of pure liquids are reported. Excess square refractive index, viscosity and activation energy of viscous flow have also been estimated. These parameters have been used to explain the formation of complexes in the system.     

Influence of SMA content on the electro-optical properties of polymer-dispersed liquid crystal prepared by monodisperse poly(MMA-co-SMA)/LC microcapsules

Monodisperse poly(methyl methacrylate) (PMMA) particles containing various concentrations of stearyl methacrylate (SMA) were prepared, and a liquid crystal (LC) was swollen into the particles using a solute co-diffusion method (SCM). Phase separation behaviors between the polymer and LC were monitored by utilizing an optical and a polarized microscope (OM/POM). The monodisperse LC microcapsules were then applied to a polymer-dispersed liquid crystal (PDLC), and the electro-optical properties were investigated. As a result, the threshold and driving voltages were improved when the SMA content increased. The long alkyl chains of SMA in the capsules should exist at the interface of the LC and polymer resulting in an enhancement of phase separation between the polymer and LC, which largely influences the electro-optical properties of PDLC.