Element-selective detection using capillary gas chromatography with atomic emission detection

Capillary GC coupled to an atomic emission detector (AED) provides a powerful new hyphenated technique for the separation and characterization of complex mixtures and compounds. The AED provides simultaneous and truly specific multi-element detection. The specificity of detection reduces the need for the complex sample pretreatment procedures which are necessary to reduce the interference from co-eluted substances which is experienced with detectors such as the FID and the ECD. A range of environmentally significant problems has been studied, including PCB analysis, the characterization of the reaction products of a novel waste treatment process, and the profiling of sulfur-containing species formed by the pyrolysis of various types of coal.     

原子荧光光谱法测定砷过程中还原反应条件的优化

自然界中砷和砷的化合物一般可通过水、大气和食物等途径进入人体,危害人体健康,原子荧光光谱法测定砷含量被广泛应用。为准确测定样品中砷的含量,以原子荧光光谱法(AFS)测定土壤中总砷含量为例,重点研究高价态砷(Ⅴ)还原为低价态砷(Ⅲ)的实验条件,采用正交实验进行条件优化,建立适合的实验方法。通过设计L9(34)正交实验,高价态砷的还原反应与四个因素有关,即与反应温度、反应时间、盐酸加入量和硫脲的用量呈一定的正相关,结果表明,四个因素中硫脲用量的影响最为显著,其次是盐酸加入量、反应时间和反应温度。通过对四个因素的多水平检验,优化后的实验条件为：硫脲用量2.0 mL、盐酸加入量10%、反应时间20 min、温度20～35 ℃(即普通室温)。采用土壤标准物质验证优化后条件的可行性,得出砷的测定值在标准值范围内,RSD在2.2%～4.2%,精密度和准确性均满足质控要求。优化后的实验条件使得操作简便易行,提高了工作效率。     

锗元素测定方法综述

锗在国防工业、航空航天和通信等领域中的战略性,锗含量的测定对于保证材料质量和满足国际标准至关重要。本文综述了锗含量测定方法的多种技术,包括分光光度法、原子荧光光谱法、原子吸收光谱法、电感耦合等离子体原子发射光谱法、电感耦合等离子体质谱法以及滴定法。在每个检测方法的介绍中,详细探讨了方法的原理、前处理步骤以及应用范围,并分别总结了各个方法的优势和不足。最后,强调了锗含量测定方法的意义,特别是在满足出口监管和促进科学研究方面的作用。同时对锗元素的测定方法进行了展望,为未来的发展提供了参考方向。     

Positron Emission Tomography Radiopharmaceuticals in Differentiated Thyroid Cancer

Differentiated thyroid cancer (DTC), arising from thyroid follicular epithelial cells, is the most common type of thyroid cancer. Despite the well-known utilization of radioiodine treatment in DTC, i.e., iodine-131, radioiodine imaging in DTC is typically performed with iodine-123 and iodine-131, with the current hybrid scanner performing single photon emission tomography/computed tomography (SPECT/CT). Positron emission tomography/computed tomography (PET/CT) provides superior visualization and quantification of functions at the molecular level; thus, lesion assessment can be improved compared to that of SPECT/CT. Various types of cancer, including radioiodine-refractory DTC, can be detected by 2-[¹⁸F]fluoro-2-deoxy-D-glucose ([¹⁸F]FDG), the most well-known and widely used PET radiopharmaceutical. Several other PET radiopharmaceuticals have been developed, although some are limited in availability despite their potential clinical utilizations. This article aims to summarize PET radiopharmaceuticals in DTC, focusing on molecular pathways and applications.     

Dielectric Properties Investigation of Metal–Insulator–Metal (MIM) Capacitors

This study presents the construction and dielectric properties investigation of atomic-layer-deposition Al₂O₃/TiO₂/HfO₂ dielectric-film-based metal–insulator–metal (MIM) capacitors. The influence of the dielectric layer material and thickness on the performance of MIM capacitors are also systematically investigated. The morphology and surface roughness of dielectric films for different materials and thicknesses are analyzed via atomic force microscopy (AFM). Among them, the 25 nm Al₂O₃-based dielectric capacitor exhibits superior comprehensive electrical performance, including a high capacitance density of 7.89 fF·µm⁻², desirable breakdown voltage and leakage current of about 12 V and 1.4 × 10⁻¹⁰ A·cm⁻², and quadratic voltage coefficient of 303.6 ppm·V⁻². Simultaneously, the fabricated capacitor indicates desirable stability in terms of frequency and bias voltage (at 1 MHz), with the corresponding slight capacitance density variation of about 0.52 fF·µm⁻² and 0.25 fF·µm⁻². Furthermore, the mechanism of the variation in capacitance density and leakage current might be attributed to the Poole–Frenkel emission and charge-trapping effect of the high-k materials. All these results indicate potential applications in integrated passive devices.     

PET Imaging of the Neuropeptide Y System: A Systematic Review

Neuropeptide Y (NPY) is a vastly studied biological peptide with numerous physiological functions that activate the NPY receptor family (Y₁, Y₂, Y₄ and Y₅). Moreover, these receptors are correlated with the pathophysiology of several diseases such as feeding disorders, anxiety, metabolic diseases, neurodegenerative diseases, some types of cancers and others. In order to deepen the knowledge of NPY receptors’ functions and molecular mechanisms, neuroimaging techniques such as positron emission tomography (PET) have been used. The development of new radiotracers for the different NPY receptors and their subsequent PET studies have led to significant insights into molecular mechanisms involving NPY receptors. This article provides a systematic review of the imaging biomarkers that have been developed as PET tracers in order to study the NPY receptor family.     

Application of Two Novel Acoustic Emission Parameters on Identifying the Instability of Granite

The issue of monitoring and early warning of rock instability has received increasing critical attention in the study of rock engineering. To investigate the damage evolution process of granite under triaxial compression tests, acoustic emission (AE) tests were performed simultaneously. This study firstly introduced two novel parameters, i.e., the coefficient of variation (CoV) of the information entropy and correlation dimension of the amplitude data from the AE tests, to identify the precursor of the failure of granite. Then the relationship between the changes in these parameters and the stress-time curve was compared and analyzed. The results of this study show that: (1) There is a strong correlation between the CoV of the information entropy and the failure process of granite. The granite failed when the CoV curve raised to a plateau, which could be used as an indicator of rock instability. (2) The fluctuation of the correlation dimension indicates the different stages during the loading process, i.e., the initial compaction stage, the linear elastic stage, the yield stage, and the failure stage. Each stage contains a descending and a rising process in the correlation dimension curve, and the exhibited starting point or the bottom point at the correlation dimension curve could be selected as the indicator point for the rock instability. (3) The combined analysis of the Information entropy and Correlation dimension can improve the accuracy of rock instability prediction. This study provides new insights into the prediction of rock instability, which has theoretical implications for the stability of subsurface engineering rock masses.     

50~250 keV质子入射SiC和Si靶时的电子发射特性研究

在中国科学院近代物理研究所兰州重离子加速器国家实验室测量了能量范围为50~250 keV 的质子入射碳化硅靶和硅靶表面的电子发射产额。实验结果发现,两种半导体靶材的电子发射产额随质子入射能量变化趋势均与作用过程中电子能损随质子入射能量的变化趋势相似。通过分析电子发射的能量来源,发现实验中电子发射产额主要由动能电子发射产额贡献,势能电子发射产额可以忽略不计。两种靶材的电子发射产额均近似地正比于质子入射靶材过程中的电子能损,比例系数B随入射能量略有变化。     

一种蓝色聚合物激光材料

聚合物作为一种有机发光材料,由于在平板显示和光电子器件中的良好应用前景而受到广泛研究［１～２］．近年来,一个重要进展是在聚合物中观测到了受激发射（简称Ｐｏｌｙ－ｍｅｒ激光）现象［３～６］．Ｐｏｌｙｍｅｒ激光最早是在溶液中实现的［３～４］．作为一种新型...     

Characterisation of tram noise emission and contribution of the noise sources

The recent expansion of French tram networks and the related local residential complaints mean that a better knowledge of the situations leading to negative reactions from the local inhabitants is required. Hence a research project has been conducted to evaluate and describe noise and vibration emission of trams as well as the perception by the local residents. This paper investigates tram noise emission on common straight track sections, involving two vehicle scales. First the acoustic power and the mean vertical directivity of the total tramset is assessed using an arc of microphones. Then the localisation and the analysis of the main noise sources are performed by means of a cross array during the tram pass-by. Two tram types representing two generations of French rolling stock, both running on two sites with distinct track characteristics, have been investigated considering the effect of speed, tram type, and track type on the noise source contributions and spectral features. Most sources are located in the lower part of the trams, mainly related to rolling noise, with a strong dependence on speed and track type. The tram type dependency, although globally of second importance, influences greatly the noise spectral distribution and behaviour. The HVAC was the only roof-mounted source which could be detected; its contribution towards building storeys becomes significant in configurations of low rolling noise. A tram noise emission model based on the various noise sources has been developed.