Variational principles for two kinds of extended Korteweg—de Vries equations

Variational principles are constructed using the semi-inverse method for two kinds of extended Korteweg—de Vries (KdV) equations, which can be regarded as simple models of the nonlinear oceanic internal waves and atmospheric long waves, respectively. The obtained variational principles have also been proved to be correct.     

基于对比态原理的常压气体黏度关联式

本文依据对比态原理.通过关联常压下气态物质的无量纲黏度ηr与对比温度Tr以及临界压缩因子Zc,分别建立了适用于单原子气体、双原子气体、碳氢化合物气体以及卤代烃类气态物质的常压下黏度关联式.选用40种物质常压黏度数据对上述关联式分别进行了验证.与文献数据相比,气体黏度计算的相对偏差绝对平均值分别为:0.47%、0.45%...     

A combined crossed molecular beam and quasiclassical trajectory study of the Titan-relevant N(2D) + D2O reaction

Following a recent investigation on the N(²D) + H₂O reaction [Homayoon et al., J. Phys. Chem. Lett. 5, 3508 (2014)], we report on an experimental and theoretical study of the isotopologue N(²D) + D₂O reaction. Crossed molecular beam (CMB) experiments were conducted at a collision energy of 10.3 kcal mol^–1. Quasiclassical trajectory calculations were performed on a recent potential energy surface to derive the centre-of-mass functions necessary to simulate the CMB laboratory distributions. Excellent agreement was found. The importance of the channel leading to HON/DON was confirmed. The inclusion of this channel, in addition to that leading to the isomer HNO/DNO, can affect the models considering the coupling between nitrogen and oxygen chemistry in the upper atmosphere of Titan.     

Novel Preparation of Polyethylene from Nano‐extrusion Polymerization Inside the Nanochannels of MCM‐41/MgCl2/TiCl4 Catalysts

The MCM‐41 and SiO₂ supported TiCl₄ and TiCl₄/MgCl₂ catalysts with different molar ratios of Mg/Ti were synthesized and used for ethylene polymerization under atmospheric pressure. The nanochannels of MCM‐41 serve as nanoscale polymerization reactor and the polyethylene nanofibers were extruded during the reaction. The nanofibers were observed in SEM micrographs of resulting polyethylene. The effect of MgCl₂ on catalytic activity and thermal properties of resulting polyethylene is investigated too. In the presence of MgCl₂, the catalytic activity increased and more crystalline polyethylene with higher melting points were formed. However, no fibers could be observed in the polyethylene prepared by SiO₂ supported catalysts.     

Lichens as biomonitors for the determination of polycyclic aromatic hydrocarbons (PAHs) in Caracas Valley,Venezuela

Biomonitoring of PAH air pollution using lichens was carried out. Sixteen PAHs were studied in 11 locations along the valley of Caracas (Venezuela). The results of this work indicate that 14 of the 16 analysed PAHs were highly accumulated into the lichen thalli of Pyxine coralligera Malme. PAH levels in the samples revealed that the several volatile PAHs (naphthalene, acenaphtylene, acenaphtene, and fluoranthene) have the highest levels in the majority of the studied locations. The fluoranthene/pyrene and phenantrene/antracene ratios suggested that the major sources of PAHs are anthropogenic, mainly associated with gasoline and diesel combustion (pyrolytic) and unburnt oil derivates (petrogenic). The total PAH concentrations obtained in the present study were in the range of 0.24 to 9.08?µg/g, similar to those reported by other works in European and Asian cities.     

Pulsed microwave-driven argon plasma jet with distinctive plume patterns resonantly excited by surface plasmon polaritons

Atmospheric lower-power pulsed microwave argon cold plasma jets are obtained by using coaxial transmission line resonators in ambient air.The plasma jet plumes are generated at the end of a metal wire placed in the middle of the dielectric tubes.The electromagnetic model analyses and simulation results suggest that the discharges are excited resonantly by the enhanced electric field of surface plasmon polaritons.Moreover,for conquering the defect of atmospheric argon filamentation discharges excited by 2.45-GHz of continued microwave,the distinctive patterns of the plasma jet plumes can be maintained by applying different gas flow rates of argon gas,frequencies of pulsed modulator,duty cycles of pulsed microwave,peak values of input microwave power,and even by using different materials of dielectric tubes.In addition,the emission spectrum,the plume temperature,and other plasma parameters are measured,which shows that the proposed pulsed microwave plasma jets can be adjusted for plasma biomedical applications.     

Assessment of the various ionization methods in the analysis of metal salen complexes by mass spectrometry

Metal salen complexes are one of the most frequently used catalysts in enantioselective organic synthesis. In the present work, we compare a series of ionization methods that can be used for the mass spectral analysis of two types of metalosalens: ionic complexes (abbreviated as Com⁺X^?) and neutral complexes (NCom). These methods include electron ionization and field desorption (FD) which can be applied to pure samples and atmospheric pressure ionization techniques: electrospray ionization (ESI), atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) which are suitable for solutions. We found that FD is a method of choice for recording molecular ions of the complexes containing even loosely bonded ligands. The results obtained using atmospheric pressure ionization methods show that the results depend mainly on the structure of metal salen complex and the ionization method. In ESI spectra, Com⁺ ions were observed, while in APCI and APPI spectra both Com⁺ and [Com + H]⁺ ions are observed in the ratio depending on the structure of the metal salen complex and the solvent used in the analysis. For complexes with tetrafluoroborate counterion, an elimination of BF₃ took place, and ions corresponding to complexes with fluoride counterion were observed. Experiments comparing the relative sensitivity of ESI, APCI and APPI (with and without a dopant) methods showed that for the majority of the studied complexes ESI is the most sensitive one; however, the sensitivity of APCI is usually less than two times lower and for some compounds is even higher than the sensitivity of ESI. Both methods show very high linearity of the calibration curve in a range of about 3 orders of magnitude of the sample concentration. Copyright © 2014 John Wiley & Sons, Ltd.     

Sorbents for the Direct Capture of CO2 from Ambient Air

The urgency to address global climate change induced by greenhouse gas emissions is increasing. In particular, the rise in atmospheric CO₂ levels is generating alarm. Technologies to remove CO₂ from ambient air, or “direct air capture” (DAC), have recently demonstrated that they can contribute to “negative carbon emission.” Recent advances in surface chemistry and material synthesis have resulted in new generations of CO₂ sorbents, which may drive the future of DAC and its large‐scale deployment. This Review describes major types of sorbents designed to capture CO₂ from ambient air and they are categorized by the sorption mechanism: physisorption, chemisorption, and moisture‐swing sorption.     

Water Catalysis of the Reaction of Methanol with OH Radical in the Atmosphere is Negligible

Faced with the contradictory results of two recent experimental studies [Jara‐Toro et al., Angew. Chem. Int. Ed. 2017 , 56, 2166 and Chao et al., Angew. Chem. Int. Ed. 2019 , 58, 5013] of the possible catalytic effect of water vapor on CH₃OH + OH reaction, we report calculations that corroborate the conclusion made by Chao et al. and extend the rate constant evaluation down to 200 K. The rate constants of the CH₃OH + OH reaction catalyzed by a water molecule are computed as functions of temperature and relative humidity using high‐level electronic structure and kinetics calculations. The Wuhan–Minnesota Scaling (WMS) method is used to provide accurate energetics to benchmark a density functional for direct dynamics. Both high‐frequency and low‐frequency anharmonicities are included. Variational and tunneling effects are treated by canonical variational transition state theory with multidimensional small‐curvature tunneling. And, most significantly, we include multistructural effects in the rate constant calculations. Our calculations show that the catalytic effect of water vapor is not observable at 200–400 K.     

大气环境下的钢筋混凝土桥梁时变可靠度分析

为了探究钢筋混凝土桥梁抗力退化对桥梁可靠性能的影响,综合考虑一般大气环境下混凝土强度、钢筋强度、混凝土与钢筋黏结性能的降低,建立普通钢筋混凝土桥梁的抗力退化时变模型,分析规范车辆荷载作用的桥梁时变可靠度。研究结果表明,(1)一般大气环境下,桥梁抗力随着服役时间的增加而减小,其中钢筋强度退化对桥梁抗力的影响最大,其次是钢筋与混凝土黏结性能降低,而混凝土强度退化对桥梁抗力的影响相对较小; (2)桥梁可靠指标随着服役时间的增加而减小,密集行车占比越大,桥梁承载能力失效的概率就越大;非平稳车载作用下的桥梁可靠指标小于平稳车载,桥梁需要维修补强的时间比平稳车载提前; (3)多梁式简支梁桥在建造时应该提高边梁的安全储备,在管养时可以采取限载措施进行干预。