无烟煤结构的高分辨电镜研究

镜质组不仅是煤结构变化最具规律性，也是影响煤质的主要微成分。用点分辨率为２．１Ａ的高分辨电镜对几种不同煤化程度的无烟煤大分子结构进行了研究。结果表明：电镜图像直接表征了无烟煤分子的非均匀性孔隙结构。京西煤分子方向化程度强，主要以芳层平行堆或有序化前结构为主；晋城煤方向化程度弱，主要以粒状嵌晶结构为主。高分辨电镜技术是研究煤分子结构和煤化作用实质的有效方法。     

Theoretical study of molecular conduction: I. Effective Green's function based on perturbation theory

There have been many experimental and theoretical studies on molecular conduction, as it is a fundamental parameter in the study of molecular‐scale electronics. We have investigated the features of molecular conduction using a Green's function method, which has often been used to solve problems in quantum transport and is also effective in elucidating electron transport in molecules. We have obtained the novel effective Green's functions, including the first‐order energy corrections, by accommodating the self‐energy of the electrodes as perturbation terms. Although these approximate Green's functions only provide information on the first‐order energy corrections, they can involve the elementary properties of molecular conduction. We propose a scheme for the analysis of the relations between molecular orbitals and their roles in molecular conduction and present analytical calculations for normal and cyclic polyenes. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

氧化钪中Ti,Mo,W,V,Zr等难熔杂质光谱分析

本用提高样品蒸发速率的方法提高氧化钪中难熔杂质光谱分析灵敏度。采用一种特殊的阴极设计，配合使用Ｎ２＋Ａｒ气氛控制，在旋流气室中放电激发，取样仅５ｍｇ的条件下，光谱测定氧化钪中难烷质Ｔｉ，Ｚｒ，Ｍｏ，Ｗ，Ｖ灵敏度可达（１－３）×１０＾－４％。测定的相对标准偏差为９％－２７％。     

Characterization of chromate conversion coating on AA7075‐T6 aluminum alloy

Chromate conversion coatings (CCCs) on AA7075‐T6 were characterized using scanning electron microscopy, focused ion beam sectioning and scanning transmission electron microscopy with nano‐electron dispersive spectroscopy line profiling. The thickness and composition of the CCC was different at different locations on the heterogeneous microstructure of AA7075‐T6. The coating formed on the matrix phase was much thicker than that formed on the coarse Al–Cu–Mg, Al–Fe–Cu and Mg–Si intermetallic particles. Nano‐electron dispersive spectroscopy line profiling indicated that the coating on the Al–Fe–Cu particles was similar to the CCC formed on the phase matrix, primarily a chromium oxide. However, the coatings on the Al–Cu–Mg and Mg–Si particles were mixed Al/Mg/Cr oxide and Mg oxide, respectively. The growth of CCC followed a linear‐logarithmic kinetic rate law. The observations of this study support the sol‐gel model of CCC formation. Copyright © 2004 John Wiley & Sons, Ltd.     

通过脱碳控制全球平均温度

Establishing a reliable method to predict the global mean temperature (T_e) is of great importance because CO₂ reduction activities require political and global cooperation and significant financial resources. The current climate models all seem to predict that the earth's temperature will continue to increase, mainly based on the assumption that CO₂ emissions cannot be lowered significantly in the foreseeable future. Given the earth's multifactor climate system, attributing atmospheric CO₂ as the only cause for the observed temperature anomaly is most likely an oversimplification; the presence of water (H₂O) in the atmosphere should at least be considered. As such, T_e is determined by atmospheric water content controlled by solar activity, along with anthropogenic CO₂ activities. It is possible that the anthropogenic CO₂ activities can be reduced in the future. Based on temperature measurements and thermodynamic data, a new model for predicting T_e has been developed. Using this model, past, current, and future CO₂ and H₂O data can be analyzed and the associated T_e calculated. This new, esoteric approach is more accurate than various other models, but has not been reported in the open literature. According to this model, by 2050, T_e may increase to 15.5 ℃ under "business-as-usual" emissions. By applying a reasonable green technology activity scenario, T_e may be reduced to approximately 14.2 ℃. To achieve CO₂ reductions, the scenario described herein predicts a CO₂ reduction potential of 513 gigatons in 30 years. This proposed scenario includes various CO₂ reduction activities, carbon capturing technology, mineralization, and bio-char production; the most important CO₂ reductions by 2050 are expected to be achieved mainly in the electricity, agriculture, and transportation sectors. Other more aggressive and plausible drawdown scenarios have been analyzed as well, yielding CO₂ reduction potentials of 1051 and 1747 gigatons, respectively, in 30 years, but they may reduce global food production. It is emphasized that the causes and predictions of the global warming trend should be regarded as open scientific questions because several details concerning the physical processes associated with global warming remain uncertain. For example, the role of solar activities coupled with Milankovitch cycles are not yet fully understood. In addition, other factors, such as ocean CO₂ uptake and volcanic activity, may not be negligible.     

Dynamic light scattering and cryogenic transmission electron microscopy investigations on metallo-supramolecular aqueous micelles: evidence of secondary aggregation

Metallo-supramolecular diblock copolymers consisting of a polystyrene (PS) block connected to a poly(ethylene oxide) (PEO) block by a bis(terpyridine)ruthenium complex (PS₂₀-[Ru]-PEO _y ) were used to prepare aqueous micelles. The length of the PS block was kept constant, while two PEOs of different molecular weight were used. The resulting hydrated micelles and aggregates were characterized by a combination of cryogenic transmission electron microscopy (cryo-TEM) and dynamic light scattering measurements. The results were compared to those obtained for a covalent counterpart (PS₂₂-b-PEO₇₀). Cryogenic transmission electron microscopy allowed visualization of the PS core of the micelles. Moreover, the aggregates result from clustering of individual micelles.     

The effect of the sintering atmosphere on the densification of B4C ceramics

Densification of boron carbide during sintering may be improved by a two-stage process, namely heating to 2000°C under vacuum and sintering at 2190°C under argon. This sintering regime allows achieving a relative density of the ceramic bodies fabricated from a fine powder higher than 95%. The nitrogen treatment of the boron carbide phase at 1900°C leads to the formation of the BN phase and precipitation of graphite. Vacuum treatment of these samples at 2000°C leads to decomposition of the boron nitride phase. The liberated free boron may again react with graphite to form in situ boron carbide particles. The experimental investigations of the sintering behavior of the boron carbide phase under various atmospheres supported the thermodynamic predictions regarding the phase transformation. No evidence, however, was found for enhanced sintering under a nitrogen atmosphere.     

Microstructural and physicochemical study of the buried Fe/AlGaAs(100) interface by transmission electron microscopy and x‐ray emission spectroscopy

Among the magnetic metal/semiconductor contacts, the Fe/GaAs system has been widely studied owing to its potential applications in electronic devices. In contrast, there are not many studies concerning the Fe/Al_xGa_1?xAs contact, and in particular there are no reports concerning the changes induced in the interfacial zone by the presence of Al. In this work, thin polycrystalline iron films were deposited by ion beam sputtering at room temperature on a 300 nm thick Al_0.25Ga_0.75As layer grown by molecular beam epitaxy onto GaAs(001). X‐ray diffraction analysis showed that the iron films are polycrystalline, and indications of a (002) texture of the film were observed. The fine scale analysis of the interface was achieved by high‐resolution transmission electron microscopy (HRTEM) observations, the results of which are compared with the physicochemical information obtained from electron‐induced x‐ray emission spectroscopy, by analysing the Al 3p valence states at the Fe/Al_xGa_1?xAs interface. The HRTEM experiments on cross‐section samples indicate that the interfacial zone between iron and AlGaAs is limited to <1.5 nm in thickness. X‐ray emission spectroscopy showed the presence of Al atoms in an FeAl‐like environment at the interface, and the existence of wrong bonds and point defects. The estimated width of the perturbed interface (2.0 ± 0.5 nm) is in agreement with the HRTEM results. Copyright © 2003 John Wiley & Sons, Ltd.     

Analysis of t-Butyldimethylsilyl Derivatives of Chlorophenols in the Atmosphere of Urban and Rural Areas in East of France

A method using GC-MS and derivatization with N-(t-butyldimethylsilyl)-N-ethyltrifluoroacetamide (MTBSTFA) was developed for the analysis of 19 chlorophenols compounds in atmospheric samples (gas and particles). Air sampling was carried out using a Hi-Vol sampler with glass fibre filter and XAD-2 resin at a flow rate of 60 m³ h⁻¹. The particle and gas phases were collected separately over a period of 4 h. Samples were Soxhlet extracted, evaporated to dryness under nitrogen and refilled with acetonitrile. 100 mL of these extracts were derivatized with 100 μL of MTBSTFA at 80 °C for 1 h under strong stirring. Sylylated chlorophenols were injected into a GC-MS in splitless mode and quantified as their TBDMS derivatives in the SIM mode. Mass spectral analysis of the derivatives of the 19 compounds studied indicates that the spectra are highly specific showing an ion at [M - 57]⁺ which is useful for structure confirmation or analysis at low levels using selected ion monitoring. Quantification limits varied between 5 μg L⁻¹ and 10 μg L⁻¹ which correspond to 20 pg m⁻³ and 40 pg m⁻³ for 250 m³ of air sampled. This method was successfully applied to atmospheric samples collected simultaneously in winter 2004 in an urban (Strasbourg) and rural (Erstein) areas in east of France.     

Novel aromatic carboxamides from dehydroabietylamine as potential fungicides: Design,synthesis and antifungal evaluation

The present study was carried out to design and synthesize a number of novel aromatic carboxamide derivatives of dehydroabietylamine. The preliminary antifungal assay indicated that most of title compounds displayed moderate to good antifungal activity toward the six fungal strains in vitro. Compounds 3i, 3q, 4b and 4d showed significant antifungal activity against Sclerotinia sclerotiorum, with EC₅₀ values ranging from 0.067 ～ 0.393 mg/L. Compounds 3i, 4b and 4d also showed pronounced mycelial growth inhibition activities against B. cinerea and A. solani. Furthermore, in the in vivo assay, compound 4b exhibited brilliant protective activity against S. sclerotiorum-infected rape leaves. Meanwhile, the in vivo bioassay on tomato plants infected by B. cinerea showed that compound 3i and 4d displayed excellent protective activity at 200 mg/L, which were near to boscalid. Primary mechanistic study revealed that 4b could inhibit sclerotia formation as well as reduce the exopolysaccharide level. SEM and TEM analysis indicated that 4b possessed a strong ability to destroy the surface morphology of mycelia, cell structure and seriously interfere with the growth of the fungal pathogen. In addition, 4b exhibited good inhibitory activity (IC₅₀ = 23.3 ± 1.6 μM) toward succinate dehydrogenase (SDH). Molecular modeling study confirmed the binding modes between compound 4b and SDH. The above antifungal results and fungicidal mechanism study revealed that this class of dehydroabietylamine derivatives could be potential SDH inhibitors and lead compounds for novel fungicides development.