中国的百岁老人研究Ⅲ.百岁老人聚居区——中国长寿之乡的成因和评定

探讨了中国长寿之乡的成因,提出了评定中国长寿之乡的四项指标和六项衡量标准。主张中国长寿之乡应由有资质的学术团体经过认真调查和核实后认定,被命名的长寿之乡应是相当于县(市)或大城市区一级以上的地域,总人口应在10万人以上;该地区每百万人口中应有70位以上百岁老人;并应有反映后备力量和发展速度的指标。     

Photochemistry of iminium salts : Electron transfer mechanisms for singlet quenching and photoaddition of n-electron donating alcohols and ethers

Several aspects of past and current studies in the area of iminium salt photochemistry are discussed. Investigations of olefin-iminium salt photoaddition and photocyclization reactions are reviewed and conclusions about electron-transfer pathways for fluorescence quenching and reaction are discussed. The results of recent studies of alcohol and ether photoaddition to 2-phenyl-1-pyrrolinium salts are presented. These C-C bond forming processes occur in moderate yields to produce β-amino alcohol or ether products. In addition, alcohols and ethers serve as efficient quenchers of pyrrolinium salt fluorescence. Rate constants for quenching appear to be dependent upon both the oxidation potential of the alcohols and ethers and the availability of C-H bond α to oxygen. This data along with deuterium isotope effects on quenching combine to suggest a common mechanism for both fluorescence quenching and photoaddition. The nature of this mechanism is tested using the comparative quenching effeciencies of the tertiary alcohols t-butyl alcohol and 1,2,2-trimethyl-1-cyclopropanol. The latter alcohol having a weak C-C bond adjacent to the hydroxyl function quenches the fluorescence of 2-phenyl-1-pyrrolium salts at a rate two orders of magnitude greater than for t-butyl alcohol. The observations made are interpreted in terms of a sequential electron-proton transfer mechanism for quenching and photoaddition. Lastly, the relationship of iminium salt photochemical studies to other investigations of electron-transfer photochemistry is discussed.     

常压回流掺钴钙锰矿锂离子电池正极材料

常压回流法制备掺杂钴离子的钙锰矿,X-射线衍射(XRD)、热重(TG)、化学分析等测试表明:钙锰矿均为单一相,组成为MgxCoyMnOz·nH2O,其中0.18≤x≤0.22、0≤y≤0.24、2.10≤z≤2.53、0.35≤n≤0.73.以掺钴钙锰矿作锂离子二次电池正极材料,组成为Tod-Co10%(10%Co的Mg0.18Co0.12MnO2.19·0.45H2O)电极放电性能最佳,其首次放电比容量为219mAh/g,100次循环充放电仍有102mAh/g.对比之下,未掺钴的Tod-Co0%电极(钙锰矿)首次放电比容量为211mAh/g,30次循环后为37mAh/g.     

Crystallization-induced asymmetric transformation of chiral-at-metal ruthenium(II) complexes bearing achiral ligands

Recently, we observed that the enantiopure Lambda form of the tributylammonium salt of the chiral anion tris[tetrachlorobenzene-1,2-bis(olato)]phosphate, also named Trisphat, was able to induce an efficient resolution of a Delta,Lambda racemic mixture of cis-[Ru(dmp)2(NCCH3)2](PF6)2 (dmp=2,9-dimethyl-1,10-phenanthroline) due to the spontaneous and selective precipitation of the heterochiral pair [Delta-Ru(dmp)2(CH3CN)2][Lambda-Trisphat]2. We report here that the combination of such a stereoselective precipitation process and irradiation results in the quantitative conversion of the initial [Ru(dmp)2(NCCH3)2]2+ racemate into only one of the two enantiomers. This is the first example in inorganic chemistry of an asymmetric transformation that leads to a chiral complex with no chiral ligand. Finally, three new racemic ruthenium bis(diimine) complexes, namely [Ru(dmp)2(NCCH3)Py](PF6)2 (Py=pyridine), [Ru(dmp)2(1,3-diaminopropane)](PF6)2, and [Ru(dmp)2(ethylenediamine)](PF6)2 were synthesized. For all of them, crystallization-induced asymmetric transformation proved to be an efficient way of obtaining the corresponding optically active chiral-at-metal complexes in high yields and with excellent stereoselectivities.     

Beyond labels: A review of the application of quantum dots as integrated components of assays, bioprobes, and biosensors utilizing optical transduction

A comprehensive review of the development of assays, bioprobes, and biosensors using quantum dots (QDs) as integrated components is presented. In contrast to a QD that is selectively introduced as a label, an integrated QD is one that is present in a system throughout a bioanalysis, and simultaneously has a role in transduction and as a scaffold for biorecognition. Through a diverse array of coatings and bioconjugation strategies, it is possible to use QDs as a scaffold for biorecognition events. The modulation of QD luminescence provides the opportunity for the transduction of these events via fluorescence resonance energy transfer (FRET), bioluminescence resonance energy transfer (BRET), charge transfer quenching, and electrochemiluminescence (ECL). An overview of the basic concepts and principles underlying the use of QDs with each of these transduction methods is provided, along with many examples of their application in biological sensing. The latter include: the detection of small molecules using enzyme-linked methods, or using aptamers as affinity probes; the detection of proteins via immunoassays or aptamers; nucleic acid hybridization assays; and assays for protease or nuclease activity. Strategies for multiplexed detection are highlighted among these examples. Although the majority of developments to date have been in vitro, QD-based methods for ex vivo biological sensing are emerging. Some special attention is given to the development of solid-phase assays, which offer certain advantages over their solution-phase counterparts.     

Synthesis and characterization of cyclophane: The highly selective recognition of Fe3+ in aqueous solution and H2PO4− in acetonitrile solution

In this work, we report a series of cyclophane fluorescent sensors based on acridine combining with imidazolium through ether linkages. X-ray crystal structures demonstrated the self-assembly behavior of these cyclophanes in the solid state driven by hydrogen bond and π–π interactions. Sensors showed excellent selectivity towards Fe³⁺ in aqueous solution (H₂O/CH₃CN?=?49:1, v/v) and H₂PO₄^? in acetonitrile solution with notable color change under UV light, evident changes were also noticed in fluorescence spectra. In fluorescence emission, the obvious turn-off was induced by Fe³⁺ in aqueous solution and the obvious turn-on as well as bathochromic-shift was induced by H₂PO₄^? in acetonitrile solution.     

Efficient synthesis of magnetic nanoparticle-Musa acuminata peel composite for the adsorption of anionic dye

The impregnation of magnetite (Mt) nanoparticle (NPs) onto Musa acuminata peel (MApe), to form a novel magnetic combo (MApe-Mt) for the adsorption of anionic bromophenol blue (BPB) was studied. The SEM, EDX, BET, XRD, FTIR and TGA were used to characterize the adsorbents. The FTIR showed that the OH and Caticassets-us-east-1.sciencedirectassets.com/shared-assets/55/entities/dbnd.gif" alt="double bond">O groups were the major sites for BPB uptake onto the adsorbent materials. The average Mt crystalline size on MApe-Mt was 21.13 nm. SEM analysis revealed that Mt NPs were agglomerated on the surface of the MApe biosorbent, with an average Mt diameter of 25.97 nm. After Mt impregnation, a decrease in BET surface area (14.89 to 3.80 m²/g) and an increase in pore diameter (2.25–3.11 nm), pore volume (0.0052–0.01418 cm³/g) and pH point of zero charge (6.4–7.2) was obtained. The presence of Pb(II) ions in solution significantly decreased the uptake of BPB onto both MApe (66.1–43.8%) and MApe-Mt (80.3–59.1%), compared to other competing ions (Zn(II), Cd(II), Ni(II)) in the solution. Isotherm modeling showed that the Freundlich model best fitted the adsorption data (R² > 0.994 and SSE < 0.0013). In addition, maximum monolayer uptake was enhanced from 6.04 to 8.12 mg/g after Mt impregnation. Kinetics were well described by the pseudo-first order and liquid film diffusion models. Thermodynamics revealed a physical, endothermic adsorption of BPB onto the adsorbents, with ΔH^o values of 15.87–16.49 kJ/mol, corroborated by high desorption (over 90%) of BPB from the loaded materials. The viability of the prepared adsorbents was also revealed in its reusability for BPB uptake.     

Stability of aqueous foam films and foams containing polymers: Discrepancies between different length scales

Polymer-stabilized foams and foam films have received considerable attention during the past years. This review paper gives an overview of recent studies dealing with polyelectrolyte/surfactant mixtures, proteins, and microgels adsorbed at single air/water interfaces, in foam films and in macroscopic foams. These polymeric systems have in common that their structure or shape changes when adsorbing at an air/water interface. These structural changes in comparison to their bulk behavior greatly influence the properties of foam films and foams. Regarding the foam stability, formation of adsorbed layers or aggregates plays an important role. The discrepancy between stabilization of macroscopic foams and destabilization of single foam films might be attributed to the blockage of Plateau borders and, therefore, slowed down drainage. Another important parameter is the interfacial viscoelasticity.     

One-dimensional and two-dimensional nanomaterials for the detection of multiple biomolecules

The complexity of biological samples determines that the detection of a single biomolecule is unable to satisfy actual needs. Moreover, the “false positives” results caused by a single biomolecule detections easily leads to erroneous clinical diagnosis and treatment. Thus, it is important for the homogenous quantification of multiple biomolecules in not only basic research but also practical application. As a consequent, a large number of literatures have been exploited to monitor multiple biomolecules in homogenous solution, enabling facilitating the development of the disease diagnosis, treatment as well as drug discovery. One-dimensional nanomaterials and two-dimensional nanomaterials have special physical and chemical properties, such as good electrochemical properties, stable structure, large specific surface area, and biocompatibility, which are widely used in electrochemical and fluorescent detection of biomolecules. This tutorial review highlights the recent development for the detection of multiple biomolecules by using nanomaterials including one-dimensional materials (1DMs) as well as two-dimensional materials (2DMs).     

Hydroxyl radical formation upon dark oxidation of reduced iron minerals: Effects of iron species and environmental factors

Dark formation of hydroxyl radical upon oxidation of reduced iron minerals plays an important role in the degradation and transformation of organic and inorganic pollutants. Herein, we compared the hydroxyl radical formation from various reduced iron minerals at different redox conditions. ^{aticassets-eu-west-1.sciencedirectassets.com/shared-assets/16/entities/rad" alt="" />}OH production was generally observed from the oxidation of reduced iron minerals, following the order: mackinawite (FeS) > reduced nontronite (iron-bearing smectite clay) > pyrite (FeS₂) > siderite (FeCO₃). Structural Fe²⁺ and dissolved O₂ play critical roles in ^{aticassets-eu-west-1.sciencedirectassets.com/shared-assets/16/entities/rad" alt="" />}OH production from reduced iron minerals. ^{aticassets-eu-west-1.sciencedirectassets.com/shared-assets/16/entities/rad" alt="" />}OH production increases with decreasing pH, and Cl^? has little effect on this process. More importantly, dissolved organic matter significantly enhances ^{aticassets-eu-west-1.sciencedirectassets.com/shared-assets/16/entities/rad" alt="" />}OH production, especially under O₂ purging, highlighting the importance of this process in ambient environments. This sunlight-independent pathway in which ^{aticassets-eu-west-1.sciencedirectassets.com/shared-assets/16/entities/rad" alt="" />}OH forms during oxidation of reduced iron minerals is helpful for understanding the degradation and transformation of various inorganic and organic pollutants in the redox-fluctuation environments.