Molecular dynamics of cyclic and linear poly(dimethylsiloxanes)

Dielectric spectroscopy (10^–1 Hz to 10⁷ Hz) has been employed to study the molecular dynamics of a series of cyclic and linear polydimethylsiloxanes (PDMS) of various molecular weights ranging from 300 to 10 000 g/mol in the temperature range above the glass transition (from 130 K to 190 K). The observed -relaxation depends strongly on both molecular weight and structure of the samples. For linear PDMS oligomers, the -relaxation shifts towards lower temperatures with decreasing molecular weight in good accordance with the Fox-Flory-model. Cyclic PDMS reveals a qualitatively different molecular weight dependence: for a given temperature the -relaxation time increases with decreasing ring length, but has a maximum for small oligomers (degree of polymerizationn6). The shape of relaxation curves and, with it, the relaxation time distribution is independent from length and architecture of the chains The observed experimental findings are in qualitative agreement with dynamic Monte-Carlo simulations.Dedicated to Prof. E.W. Fischer on the occasion of his 65th birthday Fast macht' das WLF ihn krank, jetzt raucht er wieder, Gott sei Dank! (frei nach Wilhelm Busch)     

Dynamic structure factor in a random diffusion model

Let {X _t:0} denote random walk in the random waiting time model, i.e., simple random walk with jump ratew ^–1(X _t), where {w(x):x^d} is an i.i.d. random field. We show that (under some mild conditions) theintermediate scattering function F(q,t)=E ₀ (q^d) is completely monotonic int (E ₀ denotes double expectation w.r.t. walk and field). We also show that thedynamic structure factor S(q, w)=2 ₀ cos(t)F(q, t) exists for 0 and is strictly positive. Ind=1, 2 it diverges as 1/||^1/2, resp. –ln(||), in the limit 0; ind3 its limit value is strictly larger than expected from hydrodynamics. This and further results support the conclusion that the hydrodynamic region is limited to smallq and small such that ||D |q|², whereD is the diffusion constant.     

聚苯醚砜在二甲基甲酰胺中稀溶液性质的研究(Ⅱ)

本文用广角及准弹性光散射法测定了聚苯醚砜各级分在DMF中和在θ溶剂中25℃时的均才半径R_G,第二维利系数A_2,流体力学半经R_H,扩散系数D_O,扩散系数的浓度依赖性k_F以及这些参数与分子量M的关系。它们的结果如下R_G=0.031MO~(0.55) D_O(θ)=0.906×10~(-4)M~(0.5) D_0=1.445×10~(-4)M~(0.55)A_2=0.033M~(-0.35) k_D(θ)=0.5M~(0.34) k_D=2.3×10~(-6)M~(1.36)α_H=R_H/R_H(θ)=0.63M~(0.05)R_H(θ)=0.0299M~(0.5)R_H=0.0188M~(0.55) 作者讨论了静态与动态两种高分子尺寸之间的关系;三种溶胀因子α_η和、α_H、α_G之间的关系;以及摩擦系数的浓度系数k_F与流体力学体积V_H之间的关系。它们的结果满足下面各关系式: R_H/R_G=[π(v+1)(2v+1)/3]~(1/2)(2-v)(1-v)/2, α_η~3=α_(G)~2α_H, k_F=1.2A_2M+N_AV_H/M,K_F(θ)=N_AV_H/M     

A view and a review of the melting of alkali metal halide crystals

Summary A representational model, proposed to account for the physical changes that accompany the melting of alkali halides, was described in Part 1 [1]. The liquid is portrayed as undergoing continual dynamic structural reorganization of its constituent ions between individual small domains, zones of various regular, crystal-type arrays. These alternative arrangements are stabilized by the enthalpy of melting, which, in liquids, relaxes the restriction for solids that only the single, most stable, crystal structure can be present. The dynamic character of the melt accounts for its fluid character and the loss of long-range order [1, 2]. This model is extended here to consider the phase diagrams of binary, common ion, alkali halide mixtures comprehensively reviewed in [3]. Factors determining whether each of these yields a eutectic, or a solid solution, on cooling are discussed and several trends in the 70-phase diagrams are identified. Eutectic formation, involving maintenance of the liquid state below the melting points of the pure components, is ascribed to the participation, in an extended dynamic equilibrium, of additional domains having the regular structures characteristic of double salts. The known crystalline double binary halides [3], Li/Cs or Rb/F, Cl, Br or I, melt at temperatures well below those of the simpler pure component salts. It is concluded that the set/liq model for melting, proposed in [1, 2], accounts for some important properties of the phase diagrams presented in [3].     

Size-based analysis of incinerator fly ash using gravitational SPLITT fractionation, sedimentation field-flow fractionation, and inductively coupled plasma-atomic emission spectroscopy

Fly ash has been regarded as hazardous because of its high adsorption of toxic organic and/or inorganic pollutants. Fly ash is also known to have broad distributions of different chemical and physical properties, such as size and density. In this study, fly ash emitted from a solid waste incinerator was pre-fractionated into six sub-populations by use of gravitational SPLITT fractionation (GSF). The GSF fractions were then analyzed by sedimentation field-flow fractionation (SdFFF) and ICP–AES. SdFFF analysis showed the fly ash has a broad size distribution ranging from a few nanometers up to about 50 µm. SdFFF results were confirmed by electron microscopy. Inductively coupled plasma–atomic emission spectroscopy (ICP–AES) analysis of the GSF fractions showed the fly-ash particles contain a variety of inorganic elements including Ca, Si, Mg, Fe, and Pb. The most abundant in fly ash was Ca, followed by Si then Mg. No correlations were found between trace element concentration and particle size.     

Interaction of water with the regenerated cellulose membrane studied by DSC

One to three endothermal peaks atributted to melting of bulk and interfacial water were observed by DSC in the regenerated cellulose — water system. The profiles of thermal effects depend on water content, time of conditioning, film pretreatment and the conditions applied during the preceding freezing-thawing cycles. The occurrence might be deduced of melting-crystallisation processes. A large amount of non-freezable strongly bounded water was also detected. Although cellulose absorbs water quickly after immersion, the structural changes consisting on ordering of polymer fraction occur during further conditioning due to increase in strength of water binding. Using the membranes in the separation module at 90°C causes weakening of these bonds. Differences between interaction of particular cellulose films with water can be detected during the first, the second and the third heating. This revised version was published online in July 2006 with corrections to the Cover Date.     

Analysis of grid file algorithms

Grid file algorithms were suggested in [12] to provide multi-key access to records in a dynamically growing file. We specify here two algorithms and derive the average sizes of the corresponding directories. We provide an asymptotic analysis. The growth of the indexes appears to be non-linear for uniform distributions:O(v ^c ) orO(v ), wherec=1+b^–1, =1+(s-1)/(sb+1),s is the number of attributes being used,v the file size, andb the page capacity of the system. Finally we give corresponding results for biased distributions and compare transient phases.     

A discrete method of optimal control based upon the cell state space concept

A discrete method of optimal control is proposed in this paper. The continuum state space of a system is discretized into a cell state space, and the cost function is discretized in a similar manner. Assuming intervalwise constant controls and using a finite set of admissible control levels (u) and a finite set of admissible time intervals (), the motion of the system under all possible interval controls (u, ) can then be expressed in terms of a family of cell-to-cell mappings. The proposed method extracts the optimal control results from these mappings by a systematic search, culminating in the construction of a discrete optimal control table.The possibility of expressing the optimal control results in the form of a control table seems to give this method a means to make systems real-time controllable.Dedicated to G. LeitmannThe material is based upon work supported by the National Science Foundation under Grant No. MEA-82-17471. The author is also indebted to Professor G. Leitmann for his many helpful comments.     

A statistical model for the optimization of dsc performance in the evaluation of drugs for preformulation studies

Differential scanning calorimetry (DSC) is a thermal analytical tool for preformulation studies. Extrapolated melting temperature (T_P) and heat of fusion (ΔH_f) can be used as parameters for optimizing the DSC performance. Two model pharmaceuticals acetaminophen and nicotinamide are used in this study. Using a factorial design for the experimental model and matrix analysis the results, the effect of sample mass, heating rate and the nitrogen flow rate were evaluated on the ΔH_f values and T_P values. Two levels for each of the procedural variables were used as a balanced experimental design with two sample sizes, two heating rates and two nitrogen flow rates. It was found that the change in the heating rate caused significant changes in the ΔH_f values but not the T_p values for acetaminophen. However, no significant effect was found for the T_p value but ΔH_f value was affected to a certain extent for nicotinamide.     

Purification by solid layer melt crystallization

The application of solid layer crystallization techniques in industry is arousing ever more interest. One reason is the increasing demand for ultrapure products, and another is the energysaving potential of this separation technology.This article examines solid layer melt crystallization as concerns its purification efficiency. The crystallization process was carried out in two different modes, whereby the process parameters were varied and post-crystallization treatments were additionally applied. The experimental results were used as the basis for a mathematical fit of a semi-empirical expression which predicts the purification efficiency. It was used for a design of different multistage plants, which operate with different crystallization strategies. One result is that a comparable product quality is attainable with a simple process technique in combination with post-crystallization treatments, instead of a more complicated and therefore more expensive process technique.The authors wish to acknowledge support by the EU (JOULE program), which helped attainment of some results presented here.