尼龙1010结构与性能研究进展（下）：结晶,熔融,性质,改性

本文介绍了尼龙１０１０的结晶过程与动力学、晶体的熔融与转化；并论述了其稀溶液、热降解与动态力学性质及共聚、共混、填充、增强、交联改性方面的研究进展。     

金属铜升温熔化过程的分子动力学模拟

采用分子动力学方法模拟了金属铜的升温熔化过程.原子间作用势采用FS (Finnis-Sinclair)势，结构分析采用双体分布函数(PCF)、均方位移(MSD)等方法.计算结果表明,在连续升温过程中，金属铜在1444 K熔化，在该熔化点的扩散系数为4.31×10－9 m2•s－1.上述结论与实验值相当接近，并且比之采用EAM镶嵌原子势所作模拟得到的结果更佳，说明FS势可以用来处理象液铜这样较复杂的无序体系.本文指出了升温速率在金属熔化过程中所起的作用.     

Reversible Melting of Semi-Crystalline Polymers 2. Annealing Near to the Melting Point

Annealing experiments have been carried out at a few degrees below the melting point of different polyethylenes (LDPE, LLDPE, HDPE), of polypropylene (PP) and of Nylon-6. The heat capacities decrease during the annealing, within a 2-4 min time scale, to a lower value which corresponds to the extrapolated heat capacity values obtained for the cooling cycle when the polymer is cooled from the melt. Heat capacities in the heating cycle following the cooling cycle of PP, Nylon-6 and HDPE have the same value as during the cooling section. This is not the case for LDPE and LLDPE. Exothermic total heat flow in the cooling section following the annealing indicates that the crystallisation takes place during the cooling rather than during the annealing period. The total melting enthalpy measured before and after the annealing cycle is the same. The reversing heat flow shows an excellent fit to the change of the crystallinity measured by small angle scattering of synchrotron radiation during a heating cycle at temperatures below the melting peak. A coupled thermodynamic interaction of the crystalline and the amorphous phases is concluded from this study. This kind of interaction is possible at the lateral end of polymeric chains incorporated into the crystalline phase. This is an indication of the portion of tie molecules in the system, i.e. the portion of fringed micelle type of crystalline morphology with respect to that of folded chain lamellae. This revised version was published online in July 2006 with corrections to the Cover Date.     

Aligning Text and Phonemes for Speech Technology Applications Using an EM-Like Algorithm

A common requirement in speech technology is to align two different symbolic representations of the same linguistic ‘message’. For instance, we often need to align letters of words listed in a dictionary with the corresponding phonemes specifying their pronunciation. As dictionaries become ever bigger, manual alignment becomes less and less tenable yet automatic alignment is a hard problem for a language like English. In this paper, we describe the use of a form of the expectation-maximization (EM) algorithm to learn alignments of English text and phonemes, starting from a variety of initializations. We use the British English Example Pronunciation (BEEP) dictionary of almost 200,000 words in this work. The quality of alignment is difficult to determine quantitatively since no ‘gold standard’ correct alignment exists. We evaluate the success of our algorithm indirectly from the performance of a pronunciation by analogy system using the aligned dictionary data as a knowledge base for inferring pronunciations. We find excellent performance—the best so far reported in the literature. There is very little dependence on the start point for alignment, indicating that the EM search space is strongly convex. Since the aligned BEEP dictionary is a potentially valuable resource, it is made freely available for research use.     

Identification de polymeres par analyse thermique differentielle

Nineteen different polymers having no melting endotherm (foam urea-formol, PVC, vinyl polyacetate, vinyl polybutyral, polymethacrylates, polystyrene and its copolymers) are studied by DTA. The identification is realized due to endothermic decomposition peak and exothermic peaks, according to the general method which has been described previously.

---

Zusammenfassung Mittels DTA wurden neunzehn verschiedene Polymere ohne endothermen Peak beim Schmelzen untersucht (Schaum Carbamid-Formol, PVC, Vinylpolyacetat, Vinylpolybutyral, Polymethacrylate, Polystyrol und seine Kopolymere). Die Identifizierung erfolgte in Übereinstimmung mit der unlängst beschriebenen allgemeinen Methode anhand der endothermen Zersetzung speaks und der exothermen Peaks.

     

Dynamics of the formation of two-dimensional ordered structures

The growth of ordered domains in lattice gas models, which occurs after the system is quenched from infinite temperature to a state below the critical temperatureT _c, is studied by Monte Carlo simulation. For a square lattice with repulsion between nearest and next-nearest neighbors, which in equilibrium exhibits fourfold degenerate (2×1) superstructures, the time-dependent energy E(t), domain size L(t), and structure functionS(q, t) are obtained, both for Glauber dynamics (no conservation law) and the case with conserved density (Kawasaki dynamics). At late times the energy excess and halfwidth of the structure factor decrease proportional tot ^–x, whileL(t) t ^x, where the exponent x=1/2 for Glauber dynamics and x1/3 for Kawasaki dynamics. In addition, the structure factor satisfies a scaling lawS(k,t)=t ^2xS(kt^x). The smaller exponent for the conserved density case is traced back to the excess density contained in the walls between ordered domains which must be redistributed during growth. Quenches toT>T _c, T=T_c (where we estimate dynamic critical exponents) andT=0 are also considered. In the latter case, the system becomes frozen in a glasslike domain pattern far from equilibrium when using Kawasaki dynamics. The generalization of our results to other lattices and structures also is briefly discussed.     

CRYSTALLIZATION AND MELTING OF POLY（ETHYLENE OXIDE） CONFINED IN NANOSTRUCTURED PARTICLES WITH CROSS-LINKED SHELLS OF POLYBUTADIENE

Small fixed aggregates of a poly(ethylene oxide)-block-polybutadiene diblock copolymer(PEO-b-PB)in THFsolution were obtained by adding a selective solvent for PB blocks,followed by cross-linking the PB shells.Themorphologies of the nanostructured particles with a cross-linked shell were investigated by atomic force microscopy andtransmission electron microscopy.The average behaviors of the PEO crystallization and melting confined within thenanostructured particles were studied by using differential scanning calorimetry experiments.For the deeply cross-linkedsample(SCL-1),the crystallization of the PEO blocks was fully confined.The individual nanoparticles only crystallized atvery low crystallization temperatures(T_cs),wherein the homogenous primary nucleation determined the overallcrystallization rate.For the lightly cross-linked sample(SCL-2),the confinement effect was T_c dependent.At T_c(?)42℃,thecrystallization and melting behaviors of SCL-2 were similar to those of the pure PEO-b-PB diblock copolymer.At T_c>42℃,SCL-2 could form PEO lamellae thicker than those of the pure PEO-b-PB crystallized at the same T_c.     

Melt-crystallization, glass transition and morphology of a (R)-3-hydroxybutyrate pentamer

The melt-crystallization of an oligo[(R)-3-hydroxybutyrate] with five repeating units has been analyzed using standard and temperature-modulated calorimetry, optical microscopy, and atomic force microscopy. Specimens of different crystallinity and supermolecular structure were generated by variation of the rate of cooling of a quiescent melt, or by variation of the temperature of isothermal crystallization. Completely amorphous samples can be obtained by cooling of the melt at a rate of 40 K min⁻¹, or faster, to a temperature lower than the glass transition. The crystallinity depends on the crystallization temperature. The maximum enthalpy-based crystallinity of about 40-45% is obtained by crystallization at temperatures lower than the temperature of the maximum crystallization rate, which is between 310 and 320 K. Analysis of the apparent heat capacity in metastable structural equilibrium reveals reversible melting at temperatures between 320 and 370 K by observation of an excess heat capacity above the level of the vibrational heat capacity, i.e., in the temperature range of irreversible reorganization and melting. The reversible melting is discussed in the context of coupling of the crystalline and amorphous phases, and compared to earlier studies on oligoethylene and oligo(oxyethylene). The presence of crystals causes formation of a rigid amorphous fraction of about 30% at a crystallinity of 40%. Optical and atomic force microscopy reveal spherulitic crystallization. At relatively high crystallization temperature, and in the early stage of the crystallization process, dendrites are observed which finally yield spherulites of decreased perfection. Larger spherulites of higher perfection grow at relatively low crystallization temperature, as deduced from the appearance of the Maltese cross, and the regularity of banding. The band spacing is less than 5 μm, as is accurately determined by atomic force microscopy. The temperature dependence of the spherulitic growth rate is in accord with the calorimetric analysis of the crystallization rate.     

Dynamic Lie algebraic formulation of second‐order optical nonlinearity for substituted benzenes

A dynamic Lie algebraic (DLA) formulation is applied to the study of nonlinear optical properties of the substituted benzenes. We have described the generation of the dynamic Lie algebra for the model Hamiltonian used in the present study. In terms of these elements of the dynamic algebra we express the evolution operator as a function of the group parameters, which can be determined by means of solving a system of coupled nonlinear differential equations. Thus, in terms of the density matrix operator formalism in statistical mechanics we obtain the statistical averages of the electric polarization and then derive readily an expression for the hyperpolarizability of the paradisubstituted benzenes. Comparisons with experimental observations and other quantum calculations of the hyperpolarizabilities for the paradisubstituted benzenes are made qualitatively and quantitatively. These results imply that the DLA method appears useful in describing the nonlinear optical phenomena in the substituted benzene molecules. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 93: 335–343, 2003     

Application of a sequential extraction procedure to study the release of elements from municipal solid waste incineration bottom ash

The release of five elements (Cr, Cu, Mn, Pb and Zn) from a municipal solid waste incineration bottom ash (BA) under different extraction conditions has been investigated by performing the three-step sequential extraction procedure proposed by the Standards, Measurements and Testing Program of the European Union. A fourth step (strong acid attack) has been added in order to calculate the mass balance. The results of this study provide information on the potential mobility of the studied elements. Almost all of the Cr and part of the Mn are extracted with strong acid which indicates low potential mobility in the environment. Most of the Cu is extracted under oxidizing conditions. Pb and Zn are released under acidic condition, indicating the possibility of their mobilization by changes in pH. The reproducibility of the sequential extraction procedure is also discussed.