Analysis of Terbumeton and its Major Metabolites by SPE and DAD-HPLC in Soil Bulk Water

A rapid and inexpensive method for simultaneous quantification of terbumeton (TER), and its major potential metabolites (TED; terbumeton-desethyl, TOH; terbumeton-2-hydroxy and TID; terbumeton-deisopropyl) in soil bulk water (SBW) samples is proposed. The analytical method involves extraction–concentration from SBW samples using a graphitized carbon black (GCB) cartridge followed by their separation–detection by reversed-phase high-performance liquid chromatography analysis using a C₁₈ column and a diode array detector. A mobile phase of acetonitrile−0.005 mol L⁻¹ phosphate buffer (pH 7.0) (35:65, v/v) at a flow rate of 0.8 mL min⁻¹ in isocratic elution mode has been used. After optimization of the extraction and separation conditions, this method can be used for the simultaneous determination of investigated compounds in the range of the international limits of 0.1 μg L⁻¹. For TER the detection limit was 0.009 μg L⁻¹ and it was 0.100, 0.550, and 0.480 μg L⁻¹ for TED, TOH, and TID, respectively. The recoveries of TER, TED, TOH, and TID from SBW samples, measured at three levels of concentration range, were found to be between 48.0 and 102.0%. The intra-day precision measured by relative standard deviation (RSD) was always lower than 9.0%.     

Synthesis of mono meso-pyridyl 21,23-dithiaporphyrins and unsymmetrical non-covalent porphyrin dimers

A new method has been developed to synthesize 21,23-dithiaporphyrins having one pyridyl group at the meso position. The method required easily available unknown precursors and the condensation resulted in mono meso-pyridyl 21,23-dithiaporphyrins as single products in 8-11% yield. Two of the three mono meso-pyridyl N₂S₂ porphyrins were used to synthesize non-covalent unsymmetrical porphyrin dimers containing one N₂S₂ and one N₄ porphyrin cores.     

Influence of the variable wall thickness of the sample tubes and a quartz Dewar on the EPR signal intensity in a single TE102 and double TE104 rectangular cavity

The response of a single TE₁₀₂ and double TE₁₀₄ rectangular cavity to the insertion of samples contained in tubes with variable wall thickness and a quartz Dewar into the cavity has been analyzed. A direct, indirect, and concurrent (positive or negative) “lens effect” inside the double TE₁₀₄ rectangular cavity is discussed. The experimental dependence of the EPR signal intensity on the wall thickness of the sample tube, δ, for the line-like samples with identical length of the sample material column, L=30 mm, recorded in the microwave cavity showed a directly proportional increase of the relative “lens effect” with the increase of the wall thickness of the tube in the interval, δ∈<0.1 mm, >0.5 mm. The insertion of the variable-temperature double-wall quartz Dewar (home-built, resonant frequency shift, ca. −300 MHz) into the single TE₁₀₂ rectangular cavity showed the same relative “lens effect”, with ca. 1.5-time increase of the EPR signal intensity, for a point-like sample and the line-like samples with material columns of diameter of 1 and 1.3 mm, and wall thickness of the sample tubes, δ∈<0.1 mm, >0.5 mm. The increased effect of the Dewar arises because the active volume of the quartz Dewar tube walls is always much more larger than the active volume of the sample tube wall. In the case of the double TE₁₀₄ rectangular cavity, the insertion of the quartz Dewar: (i) into the same cavity, in which the sample is present, caused a direct “lens effect”, with ca. 1.8-fold increase of the EPR signal intensity; however, (ii) into the complementary cavity, in which the sample is absent, caused an indirect “lens effect”, with ca. 0.6-fold decrease of the EPR signal intensity. With the Dewar and sample in one cavity and a large empty sample tube in the complementary cavity, a concurrent (positive or negative) “lens effect” can be observed. Thus, the possible increase/decrease of the EPR signal intensity depends on the volume ratio of the quartz Dewar tube walls and large sample tube wall inserted into the double TE₁₀₄ rectangular cavity. Each of the above phenomena may be a significant source error in quantitative EPR spectrometry unless the samples to be compared in the quantitative EPR analysis are contained in sample tubes having the same wall thickness and each EPR spectra should be recorded inside an identical quartz Dewar.     

能动抛光磨盘的变形实验研究

 能动抛光磨盘实时产生不同的表面变形，在对大口径非球面光学元件进行精磨和抛光时实现与工件表面良好的大尺寸吻合，可以消除传统光学加工采用小尺寸磨头时带来的高频残余误差并提高加工效率。以加工直径1.3m左右，F/2的抛物面光学元件为例，对能动磨盘在不同离轴度时能够产生的变形进行了计算和实验。结果表明，能动磨盘能够以较高精度产生旋转对称或非对称的抛物面形状。对能动磨盘产生变形后的残余误差进行了分析。     

腔长失调对光腔衰荡法测量精度的影响

 只考虑腔长失调因素下建立了反射率模拟测量的理论模型。根据高斯光束传输规律分析了腔长失调对衰荡腔模式耦合的影响，推导了腔长失调与谐振腔输出脉冲信号、衰荡信号与反射率之间的关系，模拟了腔长失调在±10mm范围内的光脉冲衰荡现象。结果表明：对于光敏面直径为0.2mm的高速探测器，为了保证10^-6的测量精度，腔长的失调量应控制在±1mm之间。在光路调节中采用具有对数变换功能的示波器和动态范围较大的探测器，可以提高测量精度。     

回旋速调管放大器输出腔的特性研究

 利用变截面波导的耦合模理论，根据输出腔中电场幅值分布函数所满足的微分方程组，编写了具有自动优化功能的计算程序，分析研究了不同渐变角度、考虑腔体损耗前后和输出腔与外电路失配时，谐振频率、腔体品质因数和高频场幅值沿轴分布的变化情况，为进一步研究高频场与电子注的互作用和输出腔奠定了基础。     

Use of Extraction Disks for Trace Enrichment of Various Pesticides from River and Sea Water Samples

Abstract

C-18 Empore extraction disks were used for the isolation and trace enrichment of different groups of pesticides from river water and artificial sea water at concentration levels of 0.2, 5 and 20 μg/l [chlorotriazines, (atrazine and simazine), their dealkylated metabolites, (deethyl- and deisopropylatrazine), organophosphorus (parathion-ethyl), phenylurea (linuron), anilide (propanil), carbamate (aldicarb and carbofuran) and carbamate transformation products (aldicarb sulfoxide, aldicarb sulfone and 3-hydroxy-7-phenol carbofuran]. The extraction disks allowed high flow rates thus 51 samples could be processed within 2h. 30 min.

For most of the pesticides the recoveries, as determined by liquid chromatography with diode array detection (LC-DAD), varied from 74 up to 125% with coefficients of variations (CV) of 5-10%, whereas for the carbamate transformation products the recoveries were in the range of 30-35% having a CV of 17-21%. At spiking level of 0.2 μg/l the dealkylated triazine metabolites and the carbamate transformation products were not detected at all.     

A comparison of measured room acoustics metrics using a spherical microphone array and conventional methods

The traditional microphone configuration used to measure room impulse responses (IRs) according to ISO 3382:2009 is an omnidirectional and figure-8 microphone pair. IRs measurements were taken in a 2500-seat auditorium to determine how the results from a spherical microphone array (an mh acoustics Eigenmike-em32) compare to those from the traditional microphone setup (a Brüel & Kjær Type-4192 omnidirectional microphone and a Sennheiser MKH30 figure-8 microphone). Measurements were obtained at six receiver locations, with three repetitions each in order to first evaluate repeatability. The metrics considered in this study were: reverberation time (T30), early decay time (EDT), clarity index (C80), strength (G), lateral energy fraction (J_LF) and late lateral energy level (L_J). Before calculating these quantities, the IRs were filtered to equalize the frequency response of the microphones and sound source. For the spherical array measurements, the omnidirectional (monopole) and figure-8 (dipole) patterns were extracted using beamforming. In terms of repeatability, the average standard deviation of the three measurements at each receiver location averaged across all metrics, receivers, and octave bands was found to be 0.01 just noticeable differences (JNDs). The analysis comparing the measurements from the two microphone configurations yielded differences which were less than 1 JND for the majority of metrics, with a few exceptions of EDT and C80 slightly above 1 JND. Based on this case study, these results indicate that spherical microphone arrays can be used to obtain valid room IR measurements, which will allow for the development of new metrics utilizing the higher spatial resolution made possible with spherical arrays.     

Lattice Boltzmann simulation of two-sided lid-driven flow in a staggered cavity

In this article, the lattice Boltzmann method is employed in order to explore incompressible fluid flow inside a two-sided lid-driven staggered cavity. Results of the lattice Boltzmann simulation for antiparallel motion of lids are compared with the data from existing literature. For parallel motion of lids, the characteristics of flow pattern for a variety of Re numbers (50–3200) are presented. An asymmetric steady-state flow pattern for parallel motion of lids is obtained.     

Study on an optical system with coherent laser array source and phase optimization in turbulent atmosphere

Model of an optical system with coherent laser array source and the piston phase optimized by the stochastic parallel gradient descent algorithm is established. With this model, theory of beam propagation through the optical system in turbulent atmosphere is analyzed, and the analytical formulas of the beam average intensity along the propagation path are derived. Strehl ratio of the received beam induced by intensity disorderly distribution and power efficiency of the received beam are introduced to evaluate performance of the optical system. Under the H-V 5/7 atmospheric turbulent model, performance of an optical system with determinate parameters was calculated, and the influences of the propagation distance and the laser wavelength were numerically analyzed, respectively.