电子直线加速器束流均方根发射度变化方程

本文导出了考虑外场和束流效应后束流均方根发射度平方变化方程的一般表达式,并就仅考虑外场,仅考虑空间电荷场和仅考虑尾场等三种特殊情况进行了分析。     

Production of carbon soot with a high content of C60 and C70 fullerenes by electric arc

The effect of the parameters of the electric arc (helium pressure, current and voltage, clearance between electrodes) and of the peculiarities of the setup design (arrangement of electrodes, distance between the arc and the cooling surface, temperature of the soot condensation surface) on the yield of fullerenes has been studied. Conditions for producing soot with a C₆₀ and C₇₀ content up to 43% (toluene extract) have been found.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 805–809, May, 1994.The authors are grateful to N. G. Spitsyna and A. V. Dubovitskii for the determination of the content of C₆₀ and C₇₀ fullerenes in the extract.The work was financially supported by the Russian Foundation for Basic Research (Project 93-03-18705).     

Thermal stability of poly(mono-n-alkylitaconates) and mono-n-alkylitaconate-co-vinylpyrrolidone copolymers I

Poly(monoitaconates) containing octyl, decyl and dodecyl groups and random monoalkylitaconate-co-vinylpyrrolidone copolymers were studied by thermogravimetric analysis. Copolymers of mono-n-octylitaconate (MOI), mono-n-decylitaconate (MDI), and mono-n-dodecylitaconate (MDoI), respectively, with N-vinyl-2-pyrrolidone (VP) of different compositions were studied by dynamic thermogravimetric analysis. The thermal stability of the copolymers depends on the structure of the monoitaconate comonomer and on the composition of the copolymer The kinetic analysis of the degradation data shows that the thermal decomposition of these copolymers can be described by several kinetic orders depending on the copolymer and on the composition. The relative thermal stability of the copolymers increases as the VP content increases and as the length of the side chain of the itaconate increases, following the same trend as the flexibility of the copolymers in solution.     

The number of ideals in a quadratic field

LetK be a quadratic Geld, and letR(N) be the number of integer ideals inK with norm at most AT. Letx with conductork be the quadratic character associated withK. Then |R(N)−NL(1,x)|⩽Bk ^50/73 N ^23/73(logN)^461/146 forN ≥Ak, whereA andB are constants. ForN ≥Ak ^c,C sufficiently large, the factork ^50/73 may be replaced by (d(k))^4/73 k ^46/73. Dedicated to the memory of Professor K G Ramanathan     

Molecular modeling study on surface,thermal, mechanical and gas diffusion properties of chitosan

The motivation of this work is to provide reliable and accurate modeling studies of the physical (surface, thermal, mechanical and gas diffusion) properties of chitosan (CS) polymer. Our computational efforts have been devoted to make a comparison of the structural bulk properties of CS with similar type of polymers such as chitin and cellulose through cohesive energy density, solubility parameter, hydrogen bonding, and free volume distribution calculations. Atomistic modeling on CS polymer using molecular mechanics (MM) and molecular dynamics (MD) simulations has been carried out in three dimensionally periodic and effective two dimensionally periodic condensed phases. From the equilibrated structures, surface energies were computed. The equilibrium structure of the films shows an interior region of mass density close to the value in the bulk state. Various components of energetic interactions have been examined in detail to acquire a better insight into the interactions between bulk structure and the film surface. MD simulation (NPT ensemble) has also been used to obtain polymer specific volume as a function of temperature. It is demonstrated that these V–T curves can be used to locate the volumetric glass transition temperature (T_g) reliably. The mechanical properties of CS have been obtained using the strain deformation method. Diffusion coefficients of O₂, N₂, and CO₂ gas molecules at 300 K in CS have been estimated. The calculated properties of CS are comparable with the experimental values reported in the literature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1260–1270, 2007     

Measurement of acoustic particle velocities in enclosed sound field: Assessment of two Laser Doppler Velocimetry measuring systems

The performances of two Laser Doppler Velocimetry (LDV) systems adapted for measuring the acoustic particle velocities are assessed in enclosed sound field. This assessment is performed by comparing the acoustic velocities measured by means of LDV to reference acoustic velocities estimated from sound pressure measurements. The two LDV systems are based on a single optical bench which delivers an optical signal called Doppler signal. The Doppler signal, which is frequency modulated, is analyzed by means of two signal processing systems, the BSA (Burst Spectrum Analyser from Dantec) on the one hand, and a system specifically developed for the estimation of the acoustic velocity on the other hand. Once the experimental setup has been optimized for minimizing the errors made on the reference velocities, the assessment is performed and shows that both systems can measure the acoustic velocity in enclosed field in two the frequency ranges [0-4 kHz] and [0-2 kHz] respectively for acoustic velocity amplitudes of 10 mm/s and 1 mm/s.     

Influence of temperature on phosphorescence spectra of Pd-porphine in Shpol’skii matrices

We have studied the temperature dependence of the radiative deactivation of the Pd-porphine triplet states in Shpol’skii matrices in the temperature range 1.2–210 K. A substantial transformation of the phosphorescence spectra is observed as the temperature increases and is due to the inclusion of thermally activated Pd-porphine states in the radiative deactivation processes. The activation energy E_a of these Pd-porphine states is measured in matrices of n-octane and n-nonane. The splitting of the lowest quasidegenerate triplet state ΔE(T₂−T₁) is determined for planar and distorted conformations of the Pd-porphine macrocycle in the n-octane matrix as 40 and 57 cm⁻¹, respectively. The ability to use the temperature dependence of the phosphorescence properties of Pd-porphine to fabricate molecular thermometers for the low-temperature range is analyzed. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 4, pp. 460–464, July–August, 2007.     

Calculation of impulsively started incompressible viscous flows

The paper's focus is the calculation of unsteady incompressible 2D flows past airfoils. In the framework of the primitive variable Navier–Stokes equations, the initial and boundary conditions must be assigned so as to be compatible, to assure the correct prediction of the flow evolution. This requirement, typical of all incompressible flows, viscous or inviscid, is often violated when modelling the flow past immersed bodies impulsively started from rest. Its fulfillment can however be restored by means of a procedure enforcing compatibility, consisting in a pre‐processing of the initial velocity field, here described in detail. Numerical solutions for an impulsively started multiple airfoil have been obtained using a finite element incremental projection method. The spatial discretization chosen for the velocity and pressure are of different order to satisfy the inf–sup condition and obtain a smooth pressure field. Results are provided to illustrate the effect of employing or not the compatibility procedure, and are found in good agreement with those obtained with a non‐primitive variable solver. In addition, we introduce a post‐processing procedure to evaluate an alternative pressure field which is found to be more accurate than the one resulting from the projection method. This is achieved by considering an appropriate ‘unsplit’ version of the momentum equation, where the velocity solution of the projection method is substituted. Copyright © 2004 John Wiley & Sons, Ltd.     

Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

Modification of Spatial Coherence by Means of Low-Order Zernike-Mode Adaptive Optics

Spatial coherence of the field modified by low-order adaptive optics is analyzed to establish a theoretical basis for the recent idea of using adaptive optics as a spatial coherence modifier. In this context low-order adaptive optics has the ability to correct some of the low-order aberrations specified by Zernike polynomials. The initial field to be modified is assumed to be a spatially partially coherent one resulting from phase disturbance. It is demonstrated, as in the previous study, that low-order adaptive optics serves to enhance the spatial coherence of the resultant field and that the effect of the enhancement becomes stronger as the spatial coherence of the initially partially coherent field increases. Potential applications of low-order adaptive optics as a spatial coherence modifier are briefly discussed.