Surface structure and electrochemical characteristics of natural graphite fluorinated by ClF3

Natural graphite samples with average particle sizes of 5, 10 and 15 μm (NG5 μm, NG10 μm and NG15 μm, respectively) were fluorinated by ClF₃ (3 × 10⁴ Pa) at 200 and 300 °C for 2 min. X-ray photoelectron spectra of surface-fluorinated samples showed that surface fluorine concentration increased with increase in the particle size of graphite and reaction temperature. Small amounts of chlorine were also detected in all the fluorinated samples. Raman spectra of original and surface-fluorinated samples indicated that the surface disordering was increased for NG10 μm and NG15 μm. Surface areas were decreased by the fluorination for NG5 μm and NG10 μm but unchanged for NG15 μm. The mesopores with diameter of 1.5-2 nm increased while those of 2-3 nm decreased for all the samples. First coulombic efficiencies for NG10 μm and NG15 μm were highly increased by surface fluorination in 1 mol/dm³ LiClO₄-EC/DEC/PC (EC: ethylene carbonate, DEC: diethyl carbonate, PC: propylene carbonate) solution.     

PbO2阳极在硫酸溶液中的析氧失活行为

采用热分解鄄电镀法制备了以Sb 掺杂SnO₂(Sb-SnO₂)为底层的Ti 基PbO₂阳极(Ti/PbO₂). 采用加速电解寿命测试、电化学阻抗谱、XRD、SEM-EDX 等技术, 研究了Ti/PbO₂阳极在硫酸溶液中的电解失效行为和机制.结果表明,在新制备的PbO₂镀层中, 由于氧空位的存在, PbO₂镀层的内应力表现为拉应力, 随着电解的进行, 阳极表面生成的活性氧原子在向基底扩散的过程中, 将Pb³⁺态氧化为Pb⁴⁺态, 逐渐占据镀层内作为自由电子施主的氧空位, 这不仅导致镀层的导电性能下降, 同时使镀层的应力逐渐由拉应力转变为压应力, 镀层性质逐渐劣化. 这一过程基本结束时,活性氧原子才大量扩散至Ti基底导致基底的钝化, 在Ti 基底和镀层界面出现显著的界面应力, 在界面应力和镀层内压应力的共同作用下, 阳极出现鼓泡、脱落, 迅速进入失活阶段.     

氯化钠对锂离子电池石墨负极的修饰改性

Numerous carbonaceous materials have been studied as anodes of lithium ion batteries during the past several years[1￣4].Graphite was favored for battery applications because it exhibits a high specific capac- ity, low working potential close to that of l…     

钌—钛金属氧化物涂层电极的电子能谱分析

用X-光电子能谱分析了Ru-Ti金属氧化物电极的组成、结构和元素价态。结果表明,电极表面不同于体内,讨论了表面和体内Ti的价态区别对Ru-Ti阳极活性和寿命的影响,指出掺杂Ir和Pd后会提高电极活性。     

环氧环己烷的电化学合成

环氧环己烷的电化学合成何俊翔＊周锦成（温州师范学院化学系温州３２５００３）关键词电化学环氧化，环氧环己烷，环己烯，钛基氧化物电极１９９６－１１－２２收稿，１９９７－０６－０５修回间接电解氧化合成环氧化合物的研究已有报道［１～４］．它们均在铂电极上完成...     

电化学合成镍配合物的研究

采用金属镍为“牺牲”阳极，首次在无隔膜电解槽中，电化学溶解金属镍一步 制备了纳米NiO前驱体Ni(Oet)2,Ni(Obu)2,Ni(Oet)2(acac)2，Ni(Obu)2(acac)2 [acac为乙酰丙酮基].产物通过红外光谱（FT-IR）、拉曼光谱（Raman spectrum） 进行表征。同时讨论了影响电合成镍醇盐及其配合物的关键因素。实验表明，防止 阳极钝化，温度控制在30-40℃，采用有机胺溴化物为导电盐，可以提高电合成效 率。     

电化学合成铜配合物的研究

采用金属铜为"牺牲"阳极,首次在无隔膜电解槽中,电化学溶解金属铜一步制备了纳米CuO前体Cu(OEt)2, Cu(OBu)2, Cu(acac)2, Cu(OEt)(acac), Cu(OBu)(acac) (acac为乙酰丙酮基).产物通过红外光谱(FT-IR)、拉曼光谱(Raman spectrum)进行表征.同时讨论了影响电合成铜醇盐及其配合物的关键因素.实验表明,防止阳极钝化,温度控制在30～50 ℃,采用有机胺溴化物为导电盐, 电极电位控制在0.8～1.2 V之间,可以提高电合成效率.实验同时表明Cu(acac)2, Cu(OEt)(acac), Cu(OBu)(acac)可作为制备含铜纳米材料前驱体.     

锂离子电池用多孔硅/石墨/碳复合负极材料的研究

在两步高能球磨和酸蚀条件下制得了多孔硅/石墨复合材料，并对其进行碳包覆制成多孔硅/石墨/碳复合材料。通过TEM，SEM等测试手段研究了多孔硅材料的结构。作为锂离子电池负极材料，电化学测试结果表明多孔硅/石墨/碳复合材料相比纳米硅/石墨/碳复合材料有更好的循环稳定性。同时，改变复合体配比、热解碳前驱物、粘结剂种类和用量也会对材料的电化学性能产生较大的影响。其中使用质量分数为10％的LA132粘结剂的电极200次循环以后充电容量保持在649.9 mAh·g^-1，几乎没有衰减。良好的电化学性能主要归因于主活性体-多孔硅颗粒中的纳米孔隙很好地抑制了嵌锂过程中自身的体积膨胀，而且亚微米石墨颗粒和碳的复合也减轻了电极材料的体积效应并改善了其导电性。     

Electrolytic Co3O4 for thin-layer anodes of lithium-ion batteries

Electrolytic (e) cobalt oxide of a spinel structure, e-Co₃O₄, is obtained from the sulfate and nitrate (aqueous, water-alcohol) solutions containing Co²⁺ with the aim of using it in thin-layer anodes of lithium-ion batteries. The physicochemical and structural properties of the synthesized compounds are examined using thermal and x-ray diffraction analyses, absorption IR spectroscopy, and atomic force microscopy. The electrochemical characteristics of e-Co₃O₄ are determined in breadboards of lithium power sources and in the lithiumion system LiCoO₂/e-Co₃O₄.     

添加剂对SiO电性能的影响及其机理分析

SiO_x/CoO and SiO/Li₂CO₃ composite materials were prepared by mechanical ball-milling. The structures of the obtained materials were characterized by X-ray diffraction (XRD). And scanning electron microscopes (SEM) of three samples after 20 cycles were also given. In addition， the electrochemical performances of three materials with galvanostatic charge-discharge cycling were investigated. The results show that the composite samples have larger initial reversible capacities and better cycle performance than pure SiO. Also，a schematic diagram showing the buffer effects of Li₂CO₃ addition and the mechanism of improving electrochemical performance by adding Li₂CO₃ are suggested.