Characterization of Astaxanthin Nanoemulsions Produced by Intense Fluid Shear through a Self-Throttling Nanometer Range Annular Orifice Valve-Based High-Pressure Homogenizer

Stable, oil-in-water nanoemulsions containing astaxanthin (AsX) were produced by intense fluid shear forces resulting from pumping a coarse reagent emulsion through a self-throttling annular gap valve at 300 MPa. Compared to crude emulsions prepared by conventional homogenization, a size reduction of over two orders of magnitude was observed for AsX-encapsulated oil droplets following just one pass through the annular valve. In krill oil formulations, the mean hydrodynamic diameter of lipid particles was reduced to 60 nm after only two passes through the valve and reached a minimal size of 24 nm after eight passes. Repeated processing of samples through the valve progressively decreased lipid particle size, with an inflection in the rate of particle size reduction generally observed after 2–4 passes. Krill- and argan oil-based nanoemulsions were produced using an Ultra Shear Technology™ (UST™) approach and characterized in terms of their small particle size, low polydispersity, and stability.     

Experimental Investigation Of Spray Cooling Heat Transfer On Straight Fin Surface Under Acceleration Conditions

A spray cooling heat transfer experiment on straight fin surface under acceleration conditions was conducted to investigate the effects of acceleration, flow rate, and nozzle height. The results show that the acceleration can improve the heat transfer performance in a limited way. In addition, whether in the acceleration or stationary condition, the flow rate as well as the nozzle height has the same impact on the spray cooling performance. It is also observed that the surface temperature can influence the effect of flow rate on spray cooling performance, and the cooling performance becomes worse with the increase of nozzle height.     

部分相干环状偏心光束通过海洋湍流的传输特性

推导出了部分相干环状偏心光束在海洋湍流中传输的平均光强和光束质心位置的解析表达式, 并给出了最大光强位置满足的传输方程. 研究发现: 经足够长距离传输后, 在自由空间中最大光强位置比光束质心更靠近传输z轴, 并且其位置随着光束相干参数的增大而靠近传输z 轴, 随着光束偏心参数和遮拦比的增大而远离传输z轴. 但是, 在海洋湍流中最大光强位置趋于质心位置, 并且海洋湍流的增强会加速最大光强位置趋于质心位置的进程. 在海洋湍流中光束的相干性对光束传输特性的影响明显减小. 另一方面, 光束质心位置与光束的相干性、光束传输距离以及海洋湍流均无关系, 并且光束质心位置随着光束偏心参数和遮拦比的增大而远离传输z 轴. 所得结果对工作于水下湍流环境中的部分相干环状偏心光束的应用具有重要意义.     

Bessel光束经椭圆环形孔径后的衍射光场

基于菲涅耳衍射积分理论及硬边孔径的复高斯函数展开法导出了Bessel光束经椭圆环形孔径后的光场表达式, 数值模拟了其光场的强度分布. 研究了Bessel光束经椭圆环形孔径后的光场变化及其传播过程; 在实验上利用轴棱锥输出的近似无衍射Bessel光, 通过椭圆环形孔径, 使用电荷耦合器件拍摄得到不同传播距离处的光强分布. 理论结果和实验结果均表明无衍射光束经椭圆环形孔径后会产生空心光束.     

Flow-induced noise in a suction nozzle with a centrifugal fan of a vacuum cleaner and its reduction

Noise reduction in a vacuum cleaner with a brush nozzle for cleaning a bed blanket is investigated numerically in fluid dynamic aspects. Governing equations describing nonlinear flow fields in a suction nozzle are solved simultaneously. The components of a rotary fan, a brush drum, and a separation block are installed in the nozzle. First, flow patterns in the nozzle are analyzed and based on them, flow resistance is evaluated to find a primary noise source. Flow resistance induces the loss of a suction performance as well as noise generation. In the brush nozzle, the separation block and the rotary fan obstruct smooth air flow and result in high level of noise emission. The rotation of the fan itself affects little noise generation. From the numerical results, a method to reduce noise and maintain the suction performance is suggested. In this method, the suction performance is increased through the optimization of the separation block, which is attained by the modification of its shape. And then, the height of a fan blade is shortened, leading to the performance loss. At the cost of it, the sound power level of noise is reduced by 4-5 dB(A) and at the same time, the tonal noise and the sound quality are improved appreciably. The method has been verified by experimental tests. It is found that in the brush nozzle, flow resistance is critical in noise emission and accordingly, fluid dynamic approach to noise reduction is effective.     

Global existence of the radially symmetric strong solution to Navier-Stokes-Poisson equations for isentropic compressible fluids

We prove the two existence results of the radially symmetric strong solutions to the Navier- Stokes-Poisson equations for isentropic compressible fluids. The important point in this paper is that the initial density is vacuum. It is different from weak solutions. Now we need some compatibility condition.     

Radial solution of asymptotically linear elliptic equation with mixed boundary value in annular domain

In this paper, we study nonlinear elliptic equation with mixed boundary value condition in annular domain. It is assumed that the nonlinearity is asymptotically linear and depends on the derivative term. Some results on the existence of solution are established by nonlinear analysis methods.     

填充等离子体的介质同轴波导中的切伦科夫辐射

 利用自洽线性场理论，导出了薄环形相对论电子注通过填充等离子体的介质同轴波导中的注波互作用色散方程，得到了注波互作用产生切伦科夫辐射的同步条件和波增长率。分析了填充等离子体后的波与电子注之间的能量交换及等离子体密度对色散特性、波增长率和注波能量交换的影响。分析结果表明：切伦科夫辐射是由沿介质同轴波导传播的慢波与沿薄环形相对论电子注传播的负能空间电荷波耦合所致，且其耦合强度与电子注的密度成正比；输出频率和波增长率随着填充等离子体密度的增大而提高；保持一定的输出频率，增大电子注的束流可得到高的微波输出功率。     

Large amplitude vibration of thin annular plates

A pure analytic solution of the axisymmetric large amplitude free vibration of thinannular plates is presented in this paper:By using the modified iteration method,we derivean analytic relation for the amplitudes vs.frequencies of vibrations.The present papershows the great potentiality of this method to tackle the large amplitude vibration problemsof plates.     

Flow and atomization characteristics of a twin-fluid nozzle with internal swirling and self-priming effects

A twin-fluid nozzle was proposed for low-pressure atomization. The nozzle is featured by swirling air flows in the mixing chamber. Liquid medium is thereby inhaled due to the pressure difference. An experimental work was performed to investigate the atomization performance of the nozzle and the hydrogen peroxide solution served as the liquid medium. Droplet size and droplet velocity were measured. Effects of the diameter of the air-injection orifice and the air-injection pressure were investigated. The results show that small droplet size is achieved with the proposed nozzle. As the spray develops, Sauter mean diameter (SMD) of the droplets decreases first and then increases, irrespective of the variation of the air-injection orifice diameter and the air-injection pressure. Overall SMD varies inversely with the air-injection orifice diameter and air-injection pressure. Near the nozzle, cross-sectional velocity distribution exhibits a peak-valley pattern, which is replaced with uniformized velocity distributions away from the nozzle. Similarity of cross-sectional radial velocity distribution at different air pressures is evidenced. Furthermore, the correlation between droplet size and droplet velocity is established.