Connecting free volume with shape memory properties in noncytotoxic gamma‐irradiated polycyclooctene

The free volume holes of a shape memory polymer have been analyzed considering that the empty space between molecules is necessary for the molecular motion, and the shape memory response is based on polymer segments acting as molecular switches through variable flexibility with temperature or other stimuli. Therefore, thermomechanical analysis (TMA) and positron annihilation lifetime spectroscopy (PALS) have been applied to analyze shape recovery and free volume hole sizes in gamma‐irradiated polycyclooctene (PCO) samples, as a noncytotoxic alternative to more conventional PCO crosslinked via peroxide for future applications in medicine. Thus, a first approach relating structure, free volume holes and shape memory properties in gamma‐irradiated PCO is presented. The results suggest that free volume holes caused by gamma irradiation in PCO samples facilitate the recovery process by improving movement of polymer chains and open possibilities for the design and control of the macroscopic response. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1080–1088     

Extraordinary transport behavior of gases in isothermally annealed poly(4‐methyl‐1‐pentene) membranes

Poly(4‐methyl‐1‐pentene) (PMP) membranes were modified through isothermal annealing to investigate the change of their crystalline structure and rigid and mobile amorphous fractions (RAF and MAF), assuming a three‐phase model, affected the gas transport behavior. The crystalline structure was characterized by wide‐angle X‐ray diffraction (WAXD) and small‐angle X‐ray scattering (SAXS) techniques, and the free volume properties were analyzed by positron annihilation lifetime spectroscopy. Compared with the pristine membrane, the annealed membranes show higher crystallinity; the crystals undergo partial structural change from form III to form I. The lamellar crystal thickness, rigid amorphous fraction thickness, and long period in the lamellar stacks increase with crystallinity. The annealed PMP membranes exhibit higher permeability due to the increase in larger size free volumes in MAF and higher selectivity due to the increase in smaller size free volumes in RAF, respectively. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2368–2376     

Measurement of integrated luminosities at BESIII for data samples at center-of-mass energies between 4.0 and 4.6 GeV

The integrated luminosities of data samples collected in the BESIII experiment in 2016–2017 at center-of-mass energies between 4.19 and 4.28 GeV are measured with a precision better than 1% by analyzing large-angle Bhabha scattering events. The integrated luminosities of old datasets collected in 2010–2014 are updated by considering corrections related to detector performance, offsetting the effect of newly discovered readout errors in the electromagnetic calorimeter, which can haphazardly occur.     

Characterisation of atomic-scale defects in ODS ferritic alloys by positron annihilation

The vacancy-type defects and their local chemical environment in different ODS alloys produced in the USA (14YWT), China (K5) and Russia (ODS EP-450) are studied. The Angular Correlation of Annihilation Radiation (ACAR), which is one of the positron annihilation spectroscopy method, was used. It was shown that in all alloys, except 14YWT, the dominant type of positron traps are vacancy-like defects, localised in matrix or associated with dislocations and/or interfaces of the incoherent particles. In the case of 14YWT alloy, which contains Y–Ti–O nanoclusters of a high density, the positrons confine and annihilate at O-vacancy pairs or complexes within nanoclusters. It is testified by enhanced electron density in annihilation sites and neighbourhood of Ti and Y atoms. These results, obtained by the ACAR method, indicate that the vacancies play an essential role in the formation of nanoclusters in ODS 14YWT alloy as it was theoretical predicted by first-principle calculations.     

Positron decay in polymers: Molecular weight dependence in polystyrene

The decay time τ_l ofo-Ps by the electron pickoff process has been measured in polystyrene as a function of molecular weight. For samples below their glass transition temperature τ_l is essentially independent of . In the low molecular weight region, , τ_l increased with decreasing in line with earlier theoretical predictions. The overall behaviour reflects closely the dependence of free volume on . The effects of molecular motion on τ_l are examined and it is concluded that the decay time is insensitive to such motions in polystyrene below the melting point, in contrast to what is observed in polytetrafluoroethylene.     

Addition-type polynorbornene with Si(CH3)3 side groups: Detailed study of gas permeation and thermodynamic properties

Polymerization of norbornene bearing Si(CH₃)₃ groups in the five position with the opening of double bonds was performed. By accurate selection of the ratios catalyst/co-catalyst and monomer/catalyst the samples with increased molecular mass (about 400,000) were obtained. Transport parameters of this, addition type poly(trimethylsilyl norbornene) (PTMSN) were measured using the gas chromatographic and mass spectrometric methods for different gases (H₂, He, O₂, N₂, CO₂, CH₄, C₂H₆, C₃H₈ and n-C₄H₁₀). Temperature dependence of the permeability coefficients (P) indicated that low activation energies of permeation (E_P) and diffusion (E_D) are characteristic for PTMSN. In some cases (CO₂, C₂H₆) negative E_P values were observed. Thermodynamics of vapor sorption in this polymer was studied using the inverse gas chromatography method. It was shown that PTMSN is characterized by very large solubility coefficients S similar to those of poly(trimethylsilyl propyne) (PTMSP). The comparison of the P, D, and S values of these highly permeable polymers showed that the greater permeability of PTMSP is determined by the larger D values. Application of different approaches for the determination of the size of microcavities in PTMSN indicated that this polymer is characterized by large size of microcavity (800–1200 ?³).     

Spectrophotometric determination of acidity constants by two-rank annihilation factor analysis

Annihilation of the contribution of one chemical component from the original data matrix is a general method in rank annihilation factor analysis (RAFA). However, RAFA is not applicable for studying the protonation equilibria of multiprotic acids. In this work, a two-rank annihilation factor analysis (TRAFA) method was proposed for determination of the acidity constants of diprotic acids. After recording the electronic absorbance spectra of the acids at different pH, the contributions of both H₂A and A²⁻ were annihilated from the absorbance data, which made feasible the determination of two successive acidity constants. The method was validated by analysis of simulated data and its application to the determination of the acidity constants of calmagite, as a reference compound. A close agreement was obtained between the resulted values by TRAFA and the declared values. Indeed, the method was used for determination of the acidity constants of two new chromenone derivatives in binary solvents mixtures of methanol and water. The effects of changing solvent composition on acidity constant data were explained by linear solvation free energy relationships (LSFER) utilizing solvatochromic parameters.     

Iridium(III) Complexes Bearing Pyrene‐Functionalized 1,10‐Phenanthroline Ligands as Highly Efficient Sensitizers for Triplet–Triplet Annihilation Upconversion

“Chemistry‐on‐the‐complex” synthetic methods have allowed the selective addition of 1‐ethynylpyrene appendages to the 3‐, 5‐, 3,8‐ and 5,6‐positions of Ir^III‐coordinated 1,10‐phenanthroline via Sonogashira cross‐coupling. The resulting suite of complexes has given rise to the first rationalization of their absorption and emission properties as a function of the number and position of the pyrene moieties. Strong absorption in the visible region (e.g. 3,8‐substituted Ir‐3 : λ_abs=481 nm, ?=52 400 m ^?1 cm^?1) and long‐lived triplet excited states (e.g. 5‐substituted Ir‐2 : τ_T=367.7 μs) were observed for the complexes in deaerated CH₂Cl₂. On testing the series as triplet sensitizers for triplet–triplet annihilation upconversion, those Ir^III complexes bearing pyrenyl appendages at the 3‐ and 3,8‐positions ( Ir‐1 , Ir‐3 ) were found to give optimal upconversion quantum yields (30.2 % and 31.6 % respectively).     

JRQ and JPA irradiated and annealed reactor pressure vessel steels studied by positron annihilation

The paper is focused on a comprehensive study of JRQ and JPA reactor pressure vessel steels from the positron annihilation lifetime spectroscopy (PALS) point of view. Based on our more than 20 years’ experience with characterization of irradiated reactor steels, we confirmed that defects after irradiation start to grow and/or merge into bigger clusters. Experimental results shown that JPA steel is more sensitive to the creation of irradiation-induced defects than JRQ steel. It is most probably due to high copper content (0.29?wt.% in JPA) and copper precipitation has a major impact on neutron-induced defect creation at the beginning of the irradiation. Based on current PALS results, no large vacancy clusters were formed during irradiation, which could cause dangerous embrittlement concerning operation safety of nuclear power plant. The combined PALS, small angle neutron scattering and atomic probe tomography studies support the model for JRQ and JPA steels describing the structure of irradiation-induced clusters as agglomerations of vacancy clusters (consisting of 2–6 vacancies each) and are separated from each other by a distribution of atoms.     

经典轨道的封闭性和径向Schr?dinger方程的因式分解

研究表明,保证经典轨道具有封闭性的Bertrand定理可以进一步推广,在适当的角动量下,仍存在着非椭圆的闭合轨道．对于屏蔽Coulomb场,可获得广义Runge-Lenz矢量．这种轨道封闭性与径向Schr?dinger方程因式分解相对应．