Positron annihilation studies of poly(N‐isopropyl acrylamide) gel in mixed solvents

Positron annihilation lifetime spectroscopy was used to characterize the reentrant volume‐phase‐transition behavior of poly(N‐isopropyl acrylamide) hydrogel in an ethanol/water mixed solvent. The polymer gel was synthesized with γ irradiation. The ortho‐positronium lifetime (τ₃) in the gel slowly increased with an increase in the ethanol content in the mixed solvent. τ₃ was not influenced by the volume phase transition. The ortho‐positronium intensity decreased with the collapse of the gel in an approximately 10% ethanol/water mixture. When swelled in pure ethanol, τ₃ initially increased with the solvent amount in the gel, showing the destruction of intramolecular hydrogen bonding and the relaxation of polymer chains. The lower critical solution temperature of the gel in the 10% ethanol/water mixture was lower than that in pure water, and τ₃ for various solvent contents showed behavior similar to that seen in pure solvent. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1028–1036, 2002     

Influence of Al2O3 Nanoparticles on the Thermal Stability of Ultra-Fine Grained Copper Prepared by High Pressure Torsion

Summary.  Ultra-fine grained (UFG) Cu (grain size 80 nm) containing 0.5 wt.% Al₂O₃ nanoparticles (size 20 nm) was prepared by high pressure torsion (HPT). Positron lifetime spectroscopy was employed to characterize the microstructure of this material, especially with respect to types and concentration of lattice defects. The evolution of microstructure with increasing temperature was studied by positron lifetime spectroscopy and X-ray diffraction measurements. The thermal stability of the Cu + 0.5 wt.% Al₂O₃ nanocomposite was compared with that of pure UFG Cu prepared by the same technique. The processes taking place during thermal recovery of the initial nanoscale structure in both studied materials are described. Received October 5, 2001. Accepted (revised) December 20, 2001     

Effect of an electric field on defects in a nematic liquid crystal with variable surface anchoring

We report experimental studies on defects in a nematic liquid crystal with negative dielectric anisotropy mounted in a cell with perfluoropolymer-coated surfaces. The sample exhibits a discontinuous anchoring transition from planar to homeotropic on cooling at zero or a small electric field, and above a cross-over voltage a continuous ‘inverse Freedericksz transition’, at which the director starts tilting in opposite directions at the two surfaces. Defects of strength ±1/2 are either annihilated or expelled when the director tilts. On the other hand, disclination lines of ±1 which end in partial point defects (boojums) at the surfaces in the planar alignment regime acquire point defects of strength ±1 at the midplane of the cell when the director tilts. At a low enough temperature, the homeotropic anchoring becomes strong, and an electric field above the Freedericksz threshold generates the usual umbilic defects, which follow the dynamic scaling laws found in earlier studies.     

Vacancy-like defects in nanocrystalline SnO2: influence of the annealing treatment under different atmospheres

The study of electronic and chemical properties of semiconductor oxides is motivated by their several applications. In particular, tin oxide is widely used as a solid state gas sensor material. In this regard, the defect structure has been proposed to be crucial in determining the resulting film conductivity and then its sensitivity. Here, the characteristics of vacancy-like defects in nanocrystalline commercial high-purity tin oxide powders and the influence of the annealing treatment under different atmospheres are presented. Specifically, SnO₂ nanopowders were annealed at 330 °C under three different types of atmospheres: inert (vacuum), oxidative (oxygen) and reductive (hydrogen). The obtained experimental results are discussed in terms of the vacancy-like defects detected, shedding light to the basic conduction mechanisms, which are responsible for gas detection.     

Dislocation driven chromium precipitation in Fe-9Cr binary alloy: a positron lifetime study

The influence of initial heat treatment on anomalous Cr precipitation within high temperature solubility region of the Fe–9Cr alloy has been investigated using positron lifetime studies. Air-quenched samples with pre-existing dislocations exhibited a distinct annealing stage in positron lifetime between 800 and 1100?K corresponding to Cr-precipitation. During this stage, Transmission Electron Microscopy showed fine precipitates of average size 4 nm, dispersed throughout the sample and from Energy-dispersive X-ray spectroscopy (EDS) analysis they are found to be Cr-enriched. The presence of dislocations is found to be responsible for Cr precipitation.     

Assembly-enhanced triplet-triplet annihilation upconversion in the aggregation formed by Schiff-base Pt(Ⅱ) complex grafting-permethyl-β-CD and 9,10-diphenylanthracence dimer

Water-soluble triplet sensitizer with permethyl-β-cyclodextrin(PMCD) grafting on a Schiff-base Pt(Ⅱ)complex(Pt-2),in which PMCD unit serves as a host for binding the acceptors and the Schiff-base Pt(Ⅱ)complex serves as a triplet sensitizer,was synthesized to investigate the effect of supramolecular complexation and assembly on the triplet-triplet annihilation upconversion emission in water.9,10-Diphenylanthracence(DPA) carboxylate(A-1) and its dimer(A-2) in which two DPA carboxylate were covalently linked with an alkyl chain were synthesized as triplet acceptors which also play a role of guest molecules for PMCD.A-1 and A-2 showed high affinity with PMCD,and A-2 can readily aggregate in water and form micron sized assemblies due to the hydrophobic effect and π-π stacking of anthracene core in A-2.The efficiency of TTA-UC was demonstrated to be enhanced by a synergistic effect of host-guest complexation of Pt-2 with A-2 and the self-aggregation of the acceptor A-2,which facilitated the energy transfer and energy fusion among donor and acceptor.     

Evidence for resonant structures in e＋e-→π＋π-hc

Abstract： The cross sections of e＋e-→π＋π-hc at center-of-mass energies from 3.90 to 4.42 GeV were measured by the BESIII and the CLEO-c experiments. Resonant structures are evident in the e＋e-→π＋π-hc line shape. The fit to the line shape results in a narrow structure at a mass of （4216±18） MeV/c2 and a width of （39±2） MeV, and a possible wide structure of mass （4293±9） MeV/c2 and width （222=k67） MeV. Here, the errors are combined statistical and systematic errors. This may indicate that the Y（4260） state observed in e＋e-→π＋π-J/ψ has a fine structure in it.     

The Impact of C2 Insertion into a Carbazole Donor on the Physicochemical Properties of Dibenzo[a,j]phenazine-Cored Donor–Acceptor–Donor Triads

Novel electron donor–acceptor–donor (D-A-D) compounds comprising dibenzo[a,j]phenazine as the central acceptor core and two 7-membered diarylamines (iminodibenzyl and iminostilbene) as the donors have been designed and synthesized. Investigation of their physicochemical properties revealed the impact of C₂ insertion into well-known carbazole electron donors on the properties of previously reported twisted dibenzo[a,j]phenazine-core D-A-D triads. Slight structural modification caused a drastic change in conformational preference, allowing unique photophysical behavior of dual emission derived from room-temperature phosphorescence and triplet–triplet annihilation. Furthermore, electrochemical analysis suggested sigma-dimer formation and electrochemical polymerization on the electrode. Quantum chemical calculations also rationalized the experimental results.     

Interphases in Polymer Solid-Contacts and Nanocomposites Probed by Positron Annihilation Lifetime Spectroscopy

At polymer-solid contacts with thermoplastic polymers, the chain characteristics can deviate from the bulk on a length-scale of several nanometer in the so-called interphase. Such an interphase depends on the interaction between respective macromolecule and substrate, and affects the free volume in the polymer. Here, we review our experiments on the characterization of the free volume by positron lifetime spectroscopy at planar and curved interfaces. For Teflon AF on silicon, we identify a layer of increased density, corresponding to an interphase width of some 10 nm. PEP based nanocomposites with functionalized silica show no interphase, whereas for functionalized POSS an interphase is detected.     

Study of relaxation processes in polyethylene and polystyrene by positron annihilation

Relaxation processes in polyethylene (PE) and polystyrene (PS) were studied by positron annihilation technique. For PE, above the glass transition temperature, T_g, the size of free volumes and its concentration were increased by the micro-Brownian motion of molecules. For PS, local motions of molecules in backbone chains were found to start above 260 K. However, these local motions were suppressed by an interphenyl correlation. For both PE and PS, below 250–260 K, the formation probability of positronium atoms increased with decreasing temperature. This fact was assigned to the freezing in of the local motions of molecules. For PS, an onset of the local motions of molecules was observed above 100 K. These motions were expected to be associated with liberation of phenyl groups. © 1996 John Wiley & Sons, Inc.