热处理对Nylon—11结构的影响

对不同温度热处理过的Nylon－11样品，采用广角X射线衍射（WAXD），根据X射线衍射强度理论，用多重峰图解分峰方法研究了Nylon－11结构的变化，并导出了计算Nylon－11结晶度的公式．所得结果与密度法、DSC法进行了比较．同时也给出了Nylon－11的有关热力学参数，     

Investigation of surface structure and composition of in situ annealed Fe–Mn binary alloy samples using RHEED and electron spectroscopy

The formation of oxides at the surface of Fe–1.5%Mn and Fe–0.6%Mn binary alloys was investigated as a function of the conditions of the heat treatments. Both the influence of temperature and the atmosphere under which the experiments were performed were studied. The range of annealing temperatures was adjusted to 800°C. The atmosphere consisted of a mixture of N₂–5%H₂ and traces of water vapour, with different fixed dew points ranging from −10°C to −30°C. The state of the annealed surfaces was determined using in situ analytical devices attached to the annealing reactor in order to avoid surface contamination or the formation of native oxides after the experiments due to contact with air. The structure and composition of the surfaces were determined by reflection high-energy electron diffraction (RHEED) and electron spectroscopy (XPS, AES). Copyright © 2002 John Wiley & Sons, Ltd.     

Effect of hydrocolloids on starch thermal transitions,as measured by DSC

Differential scanning calorimetry (DSC) was used to analyze the influence of different hydrocolloids (xanthan, guar, and locust bean gums, carboxymethylcellulose and sodium alginate) on the gelatinization of corn starch in systems with starch concentration ranging between 0.1 and 0.7 g starch/g mixture. The reduction of available water produced a shift in gelatinization temperature, especially of the conclusion temperature. The effect was more marked for ionic hydrocolloids. The influence of hydrocolloids on glass transition temperature (T _g) of gelatinized starch suspensions and on the glass transition temperature of the maximally freeze-concentrated solute/unfrozen water matrix (T _g) was also studied.T _g onset values ranged between –4.5 and –5.5C for corn starch pastes with and without hydrocolloids. Those hydrocolloids that increased the viscosity of the unfrozen matrix inhibited additional ice formation during thawing (devitrification).Starch concentration and final heating temperature were found to be relevant factors affecting the kinetics of amylopectin retrogradation during frozen storage at –4C. Xanthan gum failed to prevent amylopectin retrogradation; this observation could be attributed to the fact that gums act outside the starch granule, while amylopectin retrogradation takes place within the granule.     

Time and temperature-based study for the production of high T C phase by sol-gel technique in Pb-bscco system

The high T_C superconducting phase Bi₂Sr₂Ca₂Cu₃Ox (2223) in the Pb-BSCCO system has been produced by EDTA-gel processing using nitrate solutions. The precursor has heated in two stages, at 300 and 800°C each for 2 h, to avoid the burning of the important species involved in the final product. The effects of time (6 to 48 h) and temperature (845 and 855°C) on the formation of the 2223 phase have been studied by sintering the samples in air. Thermal analysis (TG/DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and a vibrating sample magnetometer (VSM) have been employed to investigate the powder produced at different stages of decomposition, oxidation and formation of sintered materials from the powders. The volume-fraction of the 2223 phase at 845°C increases with time, the maximum value of the 2223 phase was obtained at 120 h. It has been observed that the formation of the high T_C phase is remarkably enhanced at the temperature of the endothermic peak of the DTA curve. The best result has been obtained in the sample sintered for 24 h at the temperature 855°C (endothermic peak). This also indicated that at 855°C, the large volume-fraction of 2223 phase with T_C 113 K grew in short time and as the sintering time increased, it decomposed into the Bi₂Sr₂CaCu₂Ox (2212) phase and other phases.     

Cathodoluminescence Depth Profiling in SiO2:Ge Layers

 For investigation of the luminescent center profile cathodoluminescence measurements are used under variation of the primary electron energy E ₀ = 2…30 keV. Applying a constant incident power regime (E ₀·I ₀ = const), the depth profiles of luminescent centers are deduced from the range of the electron energy transfer profiles dE/dx. Thermally grown SiO₂ layers of thickness d = 500 nm have been implanted by Ge⁺-ions of energy 350 keV and doses (0.5–5)10¹⁶ ions/cm². Thus Ge profiles with a concentration maximum of (0.4 – 4) at% at the depth of d_m≅240 nm are expected. Afterwards the layers have been partially annealed up to T _a = 1100 °C for one hour in dry nitrogen. After thermal annealing, not only the typical violet luminescence (λ = 400 nm) of the Ge centers is strongly increased but also the luminescent center profiles are shifted from about 250 nm to 170 nm depth towards the surface. This process should be described by Ge diffusion processes, precipitation and finally Ge nanocluster formation. Additionally, a Ge surface layer is piled-up extending to a depth of roughly 25 nm.     

烟碱型乙酰胆碱受体吡啶基胺类配体的构效关系研究

采用分子动力学模拟退火技术寻找了一类新型烟碱型乙酰胆碱受体吡啶基胺类配体分子的优势构象，用分子力学方法进行了结构优化，再用半经验量子化学方法中的AM1方法进一步优化，并做了电子结构计算.用计算所得物化参数对配体亲和性进行多元线性回归分析，回归结果表明：化合物pKi值与分子最低空轨道能量(ELUMO)、吡啶基所带总电荷(Qp)及分子构象相关.根据计算结果对该类化合物与受体的作用机制和作用位点进行了讨论.     

Singular perturbed Markov chains and exact behaviors of simulated annealing processes

We study asymptotic properties of discrete and continuous time generalized simulated annealing processesX(·) by considering a class of singular perturbed Markov chains which are closely related to the large deviation of perturbed diffusion processes. Convergence ofX(t) in probability to a setS ₀ of desired states, e.g., the set of global minima, and in distribution to a probability concentrated onS ₀ are studied. The corresponding two critical constants denoted byd and withd are given explicitly. When the cooling schedule is of the formc/logt, X(t) converges weakly forc>0. Whether the weak limit depends onX(0) or concentrates onS ₀ is determined by the relation betweenc, d, and . Whenc>, the expression for the rate of convergence for each state is also derived.     

ZnO薄膜的椭偏和DLTS特性

用射频磁控溅射在硅衬底上淀积氧化锌薄膜,并对样品分别作氮气、空气、氧气等不同条件下退火处理。为研究退火气氛对ZnO/Si薄膜中缺陷以及折射率的影响,由深能级瞬态谱(DLTS)以及椭偏测量方法进行了检测。椭偏测量结果表明相对原始生长的样品,在氮气和空气退火使ZnO薄膜折射率下降,但氧气中退火使折射率升高。我们对折射率的这种变化机理进行了解释。DLTS测量得到一个与Zni**相关的深能级中心E1存在,氧气气氛退火可以消除E1能级。在氮气退火情况下Zn*i*的存在对抑制VO引起的薄膜折射率下降有利。     

上海深紫外自由电子激光装置波荡器磁场调整

 在对上海深紫外项目的波荡器建造过程中,应用亥姆霍兹线圈系统测量了全部单磁块,并使用模拟退火法对磁块进行组合排序优化,使反映磁场的成本函数下降了3个数量级。对一段波荡器进行了多次测量、调整,使积分场、峰峰值误差、位相误差等各项指标达到设计要求。     

基于一维标定物和改进进化策略的相机标定

为了解决运动参数光电探测过程中的相机标定问题,制作一种两端及中间各安装一个红外反光标记球的一维标定物.不需要其它复杂标定装置,只要将这种特制的一维标定物在测量空间内多次随意移动并摄取其图像,即可实现标定.算法首先假定主点位于像面中心附近的某个位置,再求出焦距、旋转矩阵、平移向量和比例因子,最后通过评价函数将相机标定转换成寻找两相机最佳主点对的非线性最小化问题.在传统进化策略中引进个体的自我改进系数、个体间距离等概念,提出了求取子代个体间的欧式距离并排序的方法,设计了搜索最佳主点对的改进型进化策略算法.与传统标定方法相比,基于一维标定物的方法克服了多相机场合的遮挡问题,改进进化策略的引入打破了一维标定物需做某种特殊运动的限制,使一维标定物自由运动时相机内、外参数的同时求解成为可能,改进的模拟退火进化策略改善了算法的全局收敛性能并加快了收敛速度.