高效阴离子交换色谱分离-脉冲安培检测法测定烟草料液中的糖、糖醇和醇类化合物

建立了高效阴离子交换色谱分离-脉冲安培检测法测定烟草料液中的糖、糖醇以及醇类化合物的方法。以NaOH为淋洗液,在CarboPac MA1阴离子交换柱上等度分离了肌醇、甘油、丙二醇、半乳糖醇、木糖醇、山梨醇、甘露醇、葡萄糖、果糖、蔗糖、甘露糖和半乳糖等12种化合物。对影响分离和检测的条件进行了优化,并在此优化条件下分析了烟草料液中的糖、糖醇以及醇类化合物。12种化合物的检出限为2.0~216μg/L(25.0μL进样,以3倍信噪比计算检出限)。12种化合物浓度为1~5mg/L的标准溶液连续7次进样的RSD为0.7%~4.3%。方法对烟草料液中12种化合物的加标回收率为80%~108%。方法灵敏、高效、简便、快捷。     

阴离子取代合成Sr3LaAxV3-xO12:Eu3+(A=Mo,W)白光荧光粉

通过高温固相法合成Sr₃LaA_xV_3-xO₁₂:Eu³⁺（A=Mo,W）荧光粉,利用MoO₄^2-和WO₄^2-取代基质中部分VO₄^3-,改变基质组成和结构,进而影响基质和激活剂Eu³⁺离子的发光性能。采用X射线衍射（XRD）、扫描电子显微镜（SEM）和荧光分光光度计对所合成样品的物相、形貌、荧光性能及荧光寿命进行表征。研究表明,MoO₄^2-和WO₄^2-的部分掺杂对基质发光位置和强度均有影响,能明显减弱VO₄^3-的发光,但对Eu³⁺离子发光影响不大,添加电荷补偿剂F^-可以加强VO₄^3-对Eu³⁺离子的能量传递。通过调整基质VO₄^3-发光和Eu³⁺离子发光,可以得到单一基质的白光荧光粉。初步探讨了阴离子掺杂对Eu³⁺离子红光发射增强的机理。     

Highly alkaline stable anion exchange membranes from nonplanar polybenzimidazole with steric hindrance backbone

The anion exchange membranes (AEMs) with both high ionic conductivity and alkali stability are always the research focus of the AEM fuel cells. Here, a novel nonplanar polymer for AEMs manufacture, mPBI‐TP‐x‐R, with excellent hydroxide stability and satisfactory processability is reported for the first time. The serial mPBI‐TP‐x resins with steric hindrance were prepared by copolymerization among 3,3′,4,4′‐tetraaminobiphenyl, isophthalic acid and tetraphenyl‐terephthalic acid (TP) in different ratios under microwave condensation. The copolymers mPBI‐TP‐x were quaternized at N1/N3‐sites of benzimidazole unit in backbone with alkyl groups (R?CH₃, C₂H₅, n‐C₃H₇, or n‐C₄H₉) to prepare soluble ionomers, and the corresponding membranes in hydroxyl ion form were prepared by a solution casting method and subsequent ion‐exchange process. The chemical structure of all membranes was characterized using FTIR and ¹H NMR spectroscopy. The properties of ion exchange capacity, water uptake, swelling ratio, tensile strength, ionic conductivity, and alkaline stability were measured. Among the prepared membranes, the mPBI‐TP‐15%‐(n‐Bu) exhibited the excellent alkaline stability (only degradation ca. 5% under 1M NaOH aqueous solution at 60 °C for 800 h) and satisfactory OH^? conductivity (46.66 mS/cm at 80 °C). The current research provides a useful exploration to commercial application of alkaline fuel cell. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1087–1096     

An Ultrafast Molecular-Rotor-Based Fluorescent Turn-On Sensor for the Perrhenate Anion in Aqueous Solution

Devising sensors for the perrhenate anion in aqueous media is extremely challenging, and has seldom been reported in the literature. Herein, we report a fluorescence turn-on sensor for the perrhenate anion in aqueous media based on the aggregation-induced emission of a popular ultrafast molecular rotor dye, Thioflavin-T. The selective response towards the perrhenate anion has been rationalized in terms of matching water affinity, with the weakly hydrated perrhenate anion spontaneously forming a contact ion pair with the weakly hydrated ultrafast molecule-rotor-based organic cation, Thioflavin-T, which in turn leads to an aggregate assembly that provides a fluorescence turn-on response towards perrhenate. The sensing response of Thioflavin-T has been found to be quite selective towards the perrhenate anion when tested against anions that are ubiquitously present in the environment, such as chloride, nitrate, and sulfate anions. The formation of self-assembled Thioflavin-T aggregates has also been investigated by time-resolved emission and temperature-dependent measurements.     

A Cation and Anion Dual Doping Strategy for the Elevation of Titanium Redox Potential for High-Power Sodium-Ion Batteries

Titanium-based polyanions have been intensively investigated for sodium-ion batteries owing to their superior structural stability and thermal safety. However, their low working potential hindered further applications. Now, a cation and anion dual doping strategy is used to boost the redox potential of Ti-based cathodes of Na₃Ti_0.5V_0.5(PO₃)₃N as a new cathode material for sodium ion batteries. Both the Ti³⁺/Ti⁴⁺ and V³⁺/V⁴⁺ redox couples are reversibly accessed, leading to two distinctive voltage platforms at ca. 3.3 V and ca. 3.8 V, respectively. The remarkably improved cycling stability (86.3 %, 3000 cycles) can be ascribed to the near-zero volume strain in this unusual cubic symmetry, which has been demonstrated by in situ synchrotron-based X-ray diffraction. First-principles calculations reveal its well-interconnected 3D Na diffusion pathways with low energy barriers, and the two-sodium-extracted intermediate NaTi_0.5V_0.5(PO₃)₃N is also a stable phase according to formation energy calculations.     

可用于连续识别Cu^2+和阴离子、中性分子荧光探针的研究进展

铜(Cu)含量的高低直接影响着生命体的正常运转和自然体系的平衡.检测铜离子的方法多种多样,其中具有较高敏感度和选择性的荧光化学传感器应用更加广泛.综述了以Cu^2+为基的荧光化学传感器通过替换法实现了对阴离子S^2-, CN^-, H2PO4^-, PPi和I^-以及中性分子ATP、ADP和生物硫醇等的连续识别的研究进展.     

Optimization of anionic conductivity through the coexistence of ionomer cluster and backbone-backbone morphologies in anion exchange membranes

Random copolymers of poly(4-vinylpyridine) and polyisoprene were synthesized, and subsequently quaternized with 1-alkylbromides. The number of carbons on the pendant side-chain of the resultant comb-shaped polymer, n, ranged from 2–8. The comb-shaped polymers were crosslinked employing thiol-ene chemistry to give mechanically robust ion conducting membranes. Analysis by wide and medium-angle X-ray scattering show three morphology regimes that are dependent on the number of carbons on the pendant side-chains. When n = 2, ionomer cluster morphology was dominant, when n = 8 backbone-backbone morphology was dominant, and when n = 3–6, the membrane showed a coexistence of both ionomer cluster and backbone-backbone morphologies. Evaluation of the water uptake of the membranes showed a maximum water uptake per cation of 9.5 when n = 5 at 95% relative humidity (RH) and 60°C. Conductivity of the samples characterized by electrochemical impedance spectroscopy showed bromide conductivity as high as 110 mS/cm when n = 3 at 95% RH and 90°C.     

Solvent-Free Synthesis of Nano Zirconium Phenylphosphonates with Molten Phenylphosphonic Acid

Nanosized α-zirconium phenylphosphonate particles were successfully prepared by the reaction between different zirconium sources and molten phenylphosphonic acid in the absence of solvent. The resultant nanoplates exhibit particle sizes in the range of 15 to 30 nm. The use of a topotactic anion exchange method starting from α-zirconium phosphate instead resulted in the generation of 15 to 180 nm plates, while also resulting in nanoparticles with a higher degree of crystallinity. The topotactic anion exchange of the phosphate groups by phenylphosphonate groups could be performed to completion when performed in molten phenylphosphonic acid. Characterization of both the final products as well as the individual steps in the anion exchange were performed by powder XRD, fast neutron activation analysis, TGA, FTIR spectroscopy, TEM, solid-state NMR and XPS.     

Intertwined Detection and Recognition Roles of Tetrazine in Synergistic Anion-π and H-bond Based Anion Receptor

The intrinsic properties of tetrazine as a π-anion receptor and as an on/off recognition probe merged with H-bond ability of an urea motif into a single architecture constitutes a new generation of well-defined anion receptors. Complexation properties directly benefit from the dual and synergistic contribution of tetrazine and urea. In this study, we report on the synthesis and assessment of binding properties to anions of diverse geometries. Association constants have been predicted by theoretical calculations and evaluated by multiple and complementary experimental techniques including electrospray-mass tandem spectroscopy, NMR, UV-visible, steady state fluorescence spectroscopies and time resolved fluorescence. These results provide the basis for a better understanding of both the complexation and the anion-dependent quenching mechanism.