Acetylation and molecular mass effects on barrier and mechanical properties of shortfin squid chitosan membranes

Chitosan samples with different N-deacetylation levels were obtained from β-chitin under heterogeneous alkali conditions. Oxidative depolymerisation was performed to attain low-acetylated chitosan samples with different molecular mass. Water vapour permeability, membrane swelling and tensile mechanical properties were analysed in plasticized self-supporting chitosan membranes. The main purpose was to describe unambigously the effect of the biopolymer molecular mass and acetylation degree on these properties. Commercially available chitosan samples derived from α-chitin were also studied for comparison. The equilibrium degree of swelling in water and the water vapour permeability increase by increasing the molecular mass or the degree of acetylation. Regarding the effect on the mechanical properties, generally harder and tougher membranes were obtained for chitosans with higher molecular mass or lower acetylation degree. These observations are tentatively explained based on the different structural characteristics of the polymer and can lead to a better understanding of the tools necessary to tailor a specific type of chitosan membrane.     

Stochastic simulation of reactive separations in capillary electrophoresis

A stochastic (Monte Carlo) simulation is used to investigate thermodynamic and kinetic contributions from the reversible A <--> B reaction in capillary electrophoresis (CE). The effects of equilibrium constant, rate constant, and electrophoretic mobility on the molecular zone profiles and the corresponding statistical moments are evaluated. As the reaction approaches steady state, the velocity of the zone is governed by the equilibrium constant and the electrophoretic mobilities of the reacting molecules. When the equilibrium constant is less than unity, the mean zone velocity is more similar to that of the reactant A. Conversely, when the equilibrium constant is greater than unity, the velocity is more similar to that of the product B. The extent of zone-broadening and asymmetry at steady state is dependent upon the equilibrium constant, the characteristic reaction lifetime, and the electrophoretic mobility difference between reacting molecules. If all other parameters are held constant, the plate height is greatest and skew is least when the equilibrium constant is unity. The plate height increases linearly with the characteristic reaction lifetime and electrophoretic mobility difference, whereas the skew is independent of these parameters. These conclusions have important implications for the elucidation of thermodynamic and kinetic information from experimental data.     

Thermal investigation of iron(III) and manganese(II,III) complexes of dianils derived from 6-formylkhellin

Manganese and iron complexes of Schiff bases derived from 6-formylkhellin were prepared and characterized. Complexes of o-phenylenediamine derivative (ligand (I)) are monomeric or dimeric whereas those of p-phenylenediamine derivative (ligand (II)) are polymeric. The complexes obtained are characterized by a lower magnetic moment values. The complexes also have different solvent of crystallization with different nature of interaction. The thermal behaviour of the ligands and their metal complexes was investigated by means of DTA, TG, IR and X-ray diffraction spectroscopy. Ligand (I) shows different thermal behaviour from that of ligands (II) and (III). The complexes of ligand (II) give abnormal oxides as a final product during their thermal decomposition. This revised version was published online in August 2006 with corrections to the Cover Date.     

Monte Carlo simulation of polarizable systems: Early rejection scheme for improving the performance of adiabatic nuclear and electronic sampling Monte Carlo simulations

An early rejection scheme for trial moves in adiabatic nuclear and electronic sampling Monte Carlo simulation (ANES-MC) of polarizable intermolecular potential models is presented. The proposed algorithm is based on Swendsen–Wang filter functions for prediction of success or failure of trial moves in Monte Carlo simulations. The goal was to reduce the amount of calculations involved in ANES-MC electronic moves, by foreseeing the success of an attempt before making those moves. The new method was employed in Gibbs ensemble Monte Carlo (GEMC) simulations of the polarizable simple point charge-fluctuating charge (SPC-FQ) model of water. The overall improvement in GEMC depends on the number of swap attempts (transfer molecules between phases) in one Monte Carlo cycle. The proposed method allows this number to increase, enhancing the chemical potential equalization. For a system with 300 SPC-FQ water molecules, for example, the fractions of early rejected transfers were about 0.9998 and 0.9994 at 373 and 423 K, respectively. This means that the transfer moves consume only a very small part of the overall computing effort, making GEMC almost equivalent to a simulation in the canonical ensemble.     

Structure formation and dynamics of water in strong external electric fields

We have performed molecular dynamics computer simulations of water in homogeneous external electric fields which were varied in a wide range of field strengths. The dielectric response is found to be linear up to fields E₀≈0.01 V/Å from where dielectric saturation effects become important. At fields of E₀≈3 V/Å a phase transition into an ordered, ice-like structure is observed, which is stabilized through hydrogen-bonds. With an increasing external electric field, the frequency spectrum of the water dynamics shows a remarkable red shift of the intramolecular modes and a blue shift of the librational motions, where the frequency varies quadratically with the field strength. A simple analytical model is discussed which reproduces the observed behavior.     

Determination of dipole moment in the ground and excited state by experimental and theoretical methods of N-nonyl acridine orange

The absorption and fluorescence spectra of N-nonyl acridine orange are determined at room temperature (298 K) in cyclohexane, benzene, carbon tetrachloride, chloroform, chlorobenzene and dichloromethane. The ground state of dipole moment was obtained by impedance measurements using Guggenheim-Debeye's method. The experimental excited state dipole moment of N-nonyl acridine orange was determined using Bakhshiev's and Kawski-Chamma-Viallet's formulae and solvent polarity parameter proposed by Reichardt. These experimental results were completed with theoretical results using quantum chemical methods. The experimental (muexp=10.76 D) and theoretical (mucal=9.9 D) dipole moments in the ground and excited state (muexp*=14.56 D) were compared.     

Diastereoselective synthesis of 2,3,4,5-tetrasubstituted isoxazolidines via 1,3-dipolar cycloaddition

The 1,3-dipolar cycloaddition reactions of α-2-methoxyaryl nitrones with nitrostyrenes and chalcones have been investigated. The regiochemistry and stereochemistry of the resultant cycloadducts have been determined with the help of NMR spectroscopy and X-ray analysis. β-Nitrostyrenes add to nitrones to give two geometrical isomers, while the β-methyl-β-nitrostyrene gives a single isomer in relatively low yield. The chalcones give a single cycloadduct upon 1,3-dipolar addition.     

Hygrometric Determination of Water Activities and Osmotic and Activity Coefficients of NH4Cl–LiCl–H2O at 25°C

The mixed aqueous electrolyte system of ammonium and lithium chlorides has been studied by the hygrometric method at 25°C. The relative humidities of this system are measured at total molalities from 0.3 to 6 mol-kg^{– 1} for different ionic-strength fractions y of NH₄Cl with y = 0.33, 0.50, and 0.67. The data obtained allow the deduction of new water activities and osmotic coefficients. The experimental results are compared with the predictions of the ECA (extended composed additivity) law proposed in our previous work. The Zdanovskii–Stokes–Robinson (ZSR), the Robinson–Stokes (RS), Reilly–Wood–Robinson (RWR), the Pitzer, and the Lietzke–Stoughton (LS II) models are also compared with our results. Predictions made using these models are, in general, consistent with our results. From these measurements, new Pitzer mixing ionic parameters are determined and used to predict the solute activity coefficients in the mixture for different ionic-strength fractions.