电光调制对外部光注入垂直腔表面发射激光器的偏振转换及其非线性动力学行为的操控性研究

针对主和副垂直腔表面发射激光器构成的外部注入激光器系统的偏振转换及其非线性动力学行为, 利用周期性极化铌酸锂晶体中准相位匹配线性电光调制, 本文提出了一种新的操控方案并且探索了其控制规律. 研究结果发现, 受到平行光注入或正交光注入的副激光器输出偏振度随外加电场成周期性振荡变化, 其振荡波峰轨迹包络曲线为正弦曲线, 而振荡波谷轨迹包络曲线为余弦曲线; 选取一定的主激光器偏置电流, 通过对来自主激光器的光进行电光调制, 受到两种方式注入的副激光器可以输出任意偏振模, 并且其非线性动力行为经历不同的演变. 另外, 副激光器的偏振度仅依赖于外加电场, 与副激光器的偏置电流无关.     

有机无机杂化固态太阳能电池的研究进展

近年来, 由于钙钛矿材料优良的光学吸收和电荷传导特性, 有机无机杂化固态太阳能电池取得了突破性的进展. 自2009年首次报道了光电转换效率为3.8%的钙钛矿太阳能电池以来, 该类电池的效率不断突破. 基于介孔薄膜的电池已取得了超过16.7%的认证光电转换效率, 基于平板异质结结构电池光电转换效率达到19.3%, 已接近传统硅基太阳能电池的光电转换效率. 本文将介绍有机无机杂化钙钛矿作为光电材料的光学物理结构特性, 以及在固态太阳能电池中的应用. 基于固态钙钛矿太阳能电池结构上的差异, 分别介绍其在多孔结构、平板异质结结构、柔性结构以及无空穴传导材料结构电池工作特性和各自优势, 以及影响电池特性的主要影响因素, 特别是钙钛矿成膜控制等. 并阐述对钙钛矿电池的理解和进一步提高固态钙钛矿电池光电转换效率需要关注的重点以及展望.     

高速线性光采样用被动锁模光纤激光器重复频率优化

线性光采样是一种测量基于先进调制码型的高速光信号的有效手段, 而被动锁模光纤激光器是其实施所需的关键组件. 本文在介绍线性光采样工作原理的基础上, 首次分析得到被动锁模光纤激光器重复频率与待测信号光线宽的约束关系, 对于正交相移键控(QPSK)信号, 当信号光线宽与采样光脉冲重复频率的比值小于1.5×10^-3 时, 高速信号的相位噪声对线性光采样带来的损伤可以忽略不计. 利用95.984 MHz重复频率的被动锁模光纤激光器对线宽为100 kHz速率为28 Gbaud的QPSK信号开展相关实验, 通过标准数字相干接收算法可以得到与传统高速示波器相同的星座图, 理论分析与实验结果完全符合. 这一研究结果有助于线性光采样用被动锁模光纤激光器的优化设计.     

基于数字相干叠加的相干光正交频分复用系统中光纤非线性容忍性研究

光正交频分复用系统中的光纤非线性效应制约着系统进一步的扩容. 针对此问题, 提出一种数字相干叠加的方法, 用于提高相干光正交频分复用系统对光纤非线性的容忍性. 仿真中, 5通道的波分复用下偏振复用相干光正交频分复用系统的每个通道传输四进制正交振幅调制映射的71.53 Gbit/s信号在光纤中传输400 km. 首先, 通道间隔为25 GHz, 与传统相干光正交频分复用系统相比, 色散补偿前后, 使用数字相干叠加的相干光正交频分复用系统的信噪比分别提升了6.02 dB和9.05 dB, 最佳入纤光功率均增大了2 dB; 其次, 通道间隔为50 GHz, 色散补偿前后, 信噪比分别提升了4.9 dB和8.75 dB. 通过理论推导及仿真, 验证了所提方法能有效消除相干光正交频分复用系统的一阶非线性失真, 进而提高系统对光纤非线性的容忍性.     

Existence of frequency modes coupling seismic waves and vibrating tall buildings

We prove in this paper an existence result for frequency modes coupling seismic waves and vibrating tall buildings. The derivation from physical principles of a set of equations modeling this phenomenon was done in previous studies. In this model all vibrations are assumed to be anti-plane and time harmonic so the two dimensional Helmholtz equation can be used. A coupling frequency mode is obtained once we can determine a wavenumber such that the solution of the corresponding Helmholtz equation in the lower half plane with relevant Neumann and Dirichlet conditions at the interface satisfies a specific integral equation at the base of an idealized tall building. Although numerical simulations suggest that such wavenumbers should exist, as far as we know, to date, there is no theoretical proof of their existence. This is what this present study offers to provide.     

Power‐to‐Gas

The power‐to‐gas concept is a promising technology to chemically store energy and therefore a feasible approach to mitigate the challenges of energy transition. Heterogeneous catalysis plays a crucial role in CO₂ conversion to methane using nickel based catalysts. A thorough catalyst characterization facilitates the synthesis of optimized catalyst systems. The determination of reaction kinetics is fundamental for industrial reactor design.     

Lactic acid bacteria in dairy food: Surface characterization and interactions with food matrix components

This review gives an overview of the importance of interactions occurring in dairy matrices between Lactic Acid Bacteria and milk components. Dairy products are important sources of biological active compounds of particular relevance to human health. These compounds include immunoglobulins, whey proteins and peptides, polar lipids, and lactic acid bacteria including probiotics. A better understanding of interactions between bioactive components and their delivery matrix may successfully improve their transport to their target site of action. Pioneering research on probiotic lactic acid bacteria has mainly focused on their host effects. However, very little is known about their interaction with dairy ingredients. Such knowledge could contribute to designing new and more efficient dairy food, and to better understand relationships between milk constituents. The purpose of this review is first to provide an overview of the current knowledge about the biomolecules produced on bacterial surface and the composition of the dairy matter. In order to understand how bacteria interact with dairy molecules, adhesion mechanisms are subsequently reviewed with a special focus on the environmental conditions affecting bacterial adhesion. Methods dedicated to investigate the bacterial surface and to decipher interactions between bacteria and abiotic dairy components are also detailed. Finally, relevant industrial implications of these interactions are presented and discussed.     

Electrochemical assessment of water|ionic liquid biphasic systems towards cesium extraction from nuclear waste

A room temperature ionic liquid (IL) composed of a quaternary alkylphosphonium (trihexyltetradecylphosphonium, P₆₆₆₁₄⁺) and tetrakis(pentafluorophenyl)borate anion (TB⁻) was employed within a water|P₆₆₆₁₄TB (w|P₆₆₆₁₄TB or w|IL) biphasic system to evaluate cesium ion extraction in comparison to that with a traditional water|organic solvent (w|o) combination. ¹³⁷Cs is a major contributor to the radioactivity of spent nuclear fuel as it leaves the reactor, and its extraction efficiency is therefore of considerable importance. The extraction was facilitated by the ligand octyl(phenyl)-N,N′-diisobutylcarbamoylphosphine oxide (CMPO) used in TRans-Uranium EXtraction processes and investigated through well established liquid|liquid electrochemistry. This study gave access to the metal ion to ligand (1:n) stoichiometry and overall complexation constant, β, of the interfacial complexation reaction which were determined to be 1:3 and 1.6 × 10¹¹ at the w|P₆₆₆₁₄TB interface while the study at w|o elicited an n equal to 1 with β equal to 86.5. Through a straightforward relationship, these complexation constant values were converted to distribution coefficients, δ_α, with the ligand concentrations studied for comparison to other studies present in the literature; the w|o and w|IL systems gave δ_α of 2 and 8.2 × 10⁷, respectively, indicating a higher overall extraction efficiency for the latter. For the w|o system, the metal ion-ligand stoichiometries were confirmed through isotopic distribution analysis of mass spectra obtained by the direct injection of an emulsified water–organic solvent mixture into an electron spray ionization mass spectrometer.     

Zirconium silicate assisted removal of residual proteins after organic solvent deproteinization of human plasma,enhancing the stability of the LC–ESI-MS response for the bioanalysis of small molecules

An efficient blood plasma clean-up method was developed, where methanol protein precipitation was applied, followed by zirconium silicate assisted exclusion of residual proteins. A strong binding of zirconium (IV) silicate to the proteins enabled the elimination of remaining proteins after solvent deproteinization through a rapid solid-phase extraction (SPE) procedure. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI/TOF MS) was used for monitoring the proteins during clean-up practice applied to human plasma samples. The proteins were quantified by colorimetric detection using the bicinchoninic acid (BCA) assay. The presented analytical strategy resulted in the depletion of >99.6% proteins from human plasma samples. Furthermore, high-performance liquid chromatography hyphenated to diode-array and electrospray ionization mass spectrometric detection (HPLC–DAD/ESI MS) was applied for qualitative and quantitative analysis of the caffeoylquinic acids (CQAs) and their metabolites in human plasma. The procedure demonstrated high recoveries for the standard compounds spiked at different concentrations. Cynarin and chlorogenic acid were recovered in the range of 81–86% and 78–83%, respectively. Caffeic acid was extracted in the excess of 89–92%, while ferulic acid and dihydroxyhydrocinnamic acid showed a recovery of 87–91% and 92–95%, respectively. The method was partially validated in accordance with FDA-Industry Guidelines for Bioanalytical Method Validation (2001). The presented scheme improves the clean-up efficacy of the methanol deproteinization, significantly reduces the matrix effects and provides a great analytical tool for the isolation of small molecules from human plasma.     

Optimal assets allocation and benefit outgo policies of DC pension plan with compulsory conversion claims

In this paper, we study optimal asset allocation and benefit outgo policies of DC (defined contribution) pension plan. We extend He and Liang model (2013a,b) to describe dynamics of individual fund scale during distribution period. The fund scale is affected by investment return, benefit outgo and mortality credit. The management of the pension plan controls the asset allocation and benefit outgo policies to achieve the objective of pension members. The goal of the management is to minimize accumulated deviations between the actual benefit outgo and a pre-set target during the whole distribution period. The performance function (criterion) is the weighted average of the square and linear deviations to express more penalty on negative deviation than positive deviation. Using HJB (Hamilton–Jacobi–Bellman) equations and variational inequality methods, the closed-forms of the optimal policies are derived. The counterintuitive effect of the optimal proportion allocated in the risky asset with respect to the fund scale is also derived, and the optimal benefit outgo has the form of the spread method. Moreover, we use Monte Carlo Methods (MCM) to analyze economic behaviors of the optimal asset allocation and benefit outgo policies.