A non-symmetric singular cauchy problem

In this paper we replace uniformly convex (or reflexive and normal structure) as required by Browder and Kirk, by uniformly normal structure to obtain a fixed point theorem for non-expansive self mappings. Examples are given to show that spaces with uniformly normal structure are not all uniformly convex and spaces with normal structure do not all have uniformly normal structure.

AMS (MOS) subject classification (1970) Primary 47410.     

Stencil lithography of gold-black IR absorption coatings

Gold black coatings are deposited through a stencil shadow mask to produce infrared-absorbing patterns with sub-mm lateral dimensions. Such dimensions match the characteristic pitch of Long Wave Infrared (LWIR) array bolometers. Infrared spectral imaging with sub-micron spatial resolution reveals the spatial distribution of absorption across the pattern.     

Signal moments for the short‐time Fourier transform associated with Hardy–Sobolev derivatives

The short‐time Fourier transform has been shown to be a powerful tool for non‐stationary signals and time‐varying systems. This paper investigates the signal moments in the Hardy–Sobolev space that do not usually have classical derivatives. That is, signal moments become valid for non‐smooth signals if we replace the classical derivatives by the Hardy–Sobolev derivatives. Our work is based on the extension of Cohen's contributions to the local and global behaviors of the signal. The relationship of the moments and spreads of the signal in the time, frequency and short‐time Fourier domain are established in the Hardy–Sobolev space. Copyright © 2014 John Wiley & Sons, Ltd.     

长链支化聚丙烯的非线性流变行为

通过大幅振荡剪切试验方法, 研究了长链支化聚丙烯的非线性流变学行为, 揭示了长链支化结构与非线性黏弹响应的关系. 利用傅里叶变换流变学方法得到试样的三次倍频相对振幅I_3/1与应变的标度关系, 用于界定线性聚丙烯和长链支化聚丙烯非线性流变行为的差异, 并定义了非线性系数来量度长链支化程度. 在高应变下, I_3/1与应变的变化关系可以进一步描述长链支化在非线性流场下的特性, 并得到了长链支化程度与其非线性响应之间的变化关系. 通过应力波的Lissajous曲线分解, 发现了环内和环间黏弹性的差异, 长链支化结构在大应变流场下的非线性黏弹性响应弱于线性结构, 支化程度越高非线性响应越弱.     

LLRF超导腔体控制系统的测试

中国科学院近代物理研究所自主研发的ADS注入器Ⅱ第一代高频低电平(LLRF)控制系统,工作频率为162.5 MHz;LLRF系统是由基于I/Q采样的正交解调技术构成的全数字闭环反馈控制系统,其主要功能是实现超导腔腔体电压幅值稳定控制、相位稳定控制与腔体谐振频率控制;LLRF控制系统在液氦温区超导腔上进行了系统稳定度和性能的在线测试,根据实验数据计算得超导腔体电压幅度稳定度为±3.4‰,相位稳定度为±0.3°,腔体表面峰值电场(Epk)能长时间稳定在25.1 MV/m。通过实验测试,检验了LLRF控制系统的性能,并对测试过程中出现的问题进行了分析,为将来超导腔LLRF控制系统运行积累了经验。     

Large Amplitude Torsions in Nitrotoluene Isomers Studied by Rotational Spectroscopy and Quantum Chemistry Calculations

Rotational spectra of ortho-nitrotoluene (2-NT) and para-nitrotoluene (4-NT) have been recorded at low and room temperatures using a supersonic jet Fourier Transform microwave (MW) spectrometer and a millimeter-wave frequency multiplier chain, respectively. Supported by quantum chemistry calculations, the spectral analysis of pure rotation lines in the vibrational ground state has allowed to characterise the rotational energy, the hyperfine structure due to the ¹⁴N nucleus and the internal rotation splittings arising from the methyl group. For 2-NT, an anisotropic internal rotation of coupled −CH₃ and −NO₂ torsional motions was identified by quantum chemistry calculations and discussed from the results of the MW analysis. The study of the internal rotation splittings in the spectra of three NT isomers allowed to characterise the internal rotation potentials of the methyl group and to compare them with other mono-substituted toluene derivatives in order to study the isomeric influence on the internal rotation barrier.     

考虑温度效应的覆冰导线动力学建模及舞动特征研究

针对以往研究忽略了温度效应对覆冰导线舞动特性的影响,本文推导了考虑温度效应影响的覆冰导线舞动控制方程.基于悬链法、热应力理论推导了覆冰导线的偏微分舞动方程,接着通过Galerkin法将该偏微分方程转化为常微分方程.建立气动载荷模型,将气动力引入到舞动方程中,随后采用多尺度求得了覆冰导线的位移响应,最后进行了参数分析、算...     

压电式微滴按需喷射的过程控制和规律

微滴喷射增材制造技术中沉积微滴的大小与均匀性是影响成型件质量的关键因素.本文设计了一种用于生成均匀微滴的压电驱动式微滴喷射装置,通过压电材料带动柔性膜片振动,将液体从喷嘴中喷出生成微滴,采用数值模拟和实验相结合的方法,研究了不同控制参数下膜片振幅及其对生成微滴尺寸和均匀性的影响.研究结果表明:膜片振幅大小受到驱动电压和压电频率的共同影响,压电频率是导致膜片中心点振幅实验测量值小于理论计算值的主要原因,膜片振动会导致喷嘴内部压力发生变化从而影响微滴生成尺寸.在相同驱动电压条件下,压电频率为10 Hz时存在压电膜片振幅最大值.随着膜片振幅的增大,喷孔处液体速度和液柱长度增大到临界值时可以生成微滴,当喷孔处的液柱长度超过临界值时,会形成卫星液滴. 当膜片振幅区间在30 $\mu$m$\sim $42 $\mu $m可以稳定生成微滴,生成最小微滴尺寸为339.8$\mu$m,直径最大变化率为0.29%,相邻两微滴间距最大变化率为2.67%,生成微滴的尺寸及均匀性较好.研究结果有助于提高压电式微滴喷射装置的液滴生成质量.