A comparative study of the structure and crystallization of bulk metallic amorphous rod Pr60Ni30Al10 and melt-spun metallic amorphous ribbon Al87Ni10Pr3

Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Thermal parameters deduced from differential scanning calorimeter （DSC） indicate that the glass-forming ability （GFA） of Pr60Ni30Al10 BMA rod is far higher than that of Al87Ni10Pr3 ribbon. A comparative study about the differences in structure between the two kinds of glass-forming alloys, superheated viscosity and crystallization are also made. Compared with the amorphous alloy Al87Ni10Pr3, the BMA alloy Pr60Ni30Al10 shows high thermal stability and large viscosity, small diffusivity at the same superheated temperatures. The results of x-Ray diffraction （XRD） and transmission electron microscope （TEM） show the pronounced difference in structure between the two amorphous alloys. Together with crystallization results, the main structure compositions of the amorphous samples are confirmed. It seems that the higher the GFA, the more topological type clusters in the Pr-Ni-Al amorphous alloys, the GFAs of the present glass-forming alloys are closely related to their structures.     

Targeted Construction of Amorphous MoSx with an Inherent Chain Molecular Structure for Improved Pseudocapacitive Lithium-Ion Response

Owing to low ion/electron conductivity and large volume change, transitional metal dichalcogenides (TMDs) suffer from inferior cycle stability and rate capability when used as the anode of lithium-ion batteries (LIBs). To overcome these disadvantages, amorphous molybdenum sulfide (MoS_x) nanospheres were prepared and coated with an ultrathin carbon layer through a simple one-pot reaction. Combining X-ray photoelectron spectroscopy (XPS) with theoretical calculations, MoS_x was confirmed as having a special chain molecular structure with two forms of S bonding (S²⁻ and S₂²⁻), the optimal adsorption sites of Li⁺ were located at S₂²⁻. As a result, the MoS_x electrode exhibits superior cycle and rate capacities compared with crystalline 2H-MoS₂ (e.g., delivering a high capacity of 612.4 mAh g⁻¹ after 500 cycles at 1 A g⁻¹). This is mainly attributed to more exposed active S₂²⁻ sites for Li storage, more Li⁺ transfer pathways for improved ion conductivity, and suppressed electrode structure pulverization of MoS_x derived from the inherent chain-like molecular structure. Quantitative charge storage analysis further demonstrates the improved pseudocapacitive contribution of amorphous MoS_x induced by fast reaction kinetics. Moreover, the morphology contrast after cycling demonstrates the dispersion of active materials is more uniform for MoS_x than 2H-MoS₂, suggesting the MoS_x can well accommodate the volume stress of the electrode during discharging. Through regulating the molecular structure, this work provides an effective targeted strategy to overcome the intrinsic issues of TMDs for high-performance LIBs.     

Highly selective hydrogenation of acetophenone over supported amorphous alloy catalyst

Alpha-phenylethanol (PE) is an essential chemical in the field of medicine and synthetic perfumery. Therefore, in this work, we used a supported Ni–B–P amorphous alloy catalyst (Ni–B–P/SiO₂) in the hydrogenation of acetophenone (AP) to α-PE, which demonstrated excellent catalytic activity and selectivity, compared with Ni–B/SiO₂ (KBH₄ reduction of nickel salt). Ni–B–P/SiO₂ exhibited a high AP hydrogenation conversion of approximately 99%, whereas the PE selectivity reached up to 94%, which is approximately 1.4-fold higher than that of Ni–B/SiO₂ (about 69%), thereby directly proving the unique inhibition of AP hydrogenation over hydrogenation of P in the Ni–B catalytic system. The doped P in Ni–B–P/SiO₂ enhances the oxidation resistance and maintains the valence stability of Ni and B. Furthermore, sufficient experimental data were collected to determine the kinetic parameters. Based on the Langmuir–Hinshelwood model, we assumed that (i) AP and H₂ compete for adsorption on Ni–B–P/SiO₂; (ii) AP has strong adsorptive capacity on Ni–B–P/SiO₂; and (iii) PE coverage on the catalyst was negligible. Then, the dynamic equation was derived, which indicated that experimental data agree well with the dynamic model. Finally, the activation energy was confirmed to be 50.73 KJ/mol. This report will open up an avenue for the industrialization of amorphous alloy catalysts.     

Adaptive Bifunctional Electrocatalyst of Amorphous CoFe Oxide @ 2D Black Phosphorus for Overall Water Splitting

Water electrolysis offers a promising green technology to tackle the global energy and environmental crisis, but its efficiency is greatly limited by the sluggish reaction kinetics of both the cathodic hydrogen evolution reaction (HER) and anodic oxygen evolution reaction (OER). In this work, by growing amorphous multi-transition-metal (cobalt and iron) oxide on two-dimensional (2D) black phosphorus (BP), we develop a bifunctional electrocatalyst (CoFeO@BP), which is able to efficiently catalyze both HER and OER. The overpotentials for the hybrid CoFeO@BP catalyst to reach a current density of 10 mA cm⁻² in 1 m KOH are 88 and 266 mV for HER and OER, respectively. Based on a series of ex-situ and in situ investigations, the excellent catalytic performance of CoFeO@BP is found to result from the adaptive surface structure under reduction and oxidation potentials. CoFeO@BP can be transformed to CoFe phosphide under reduction potential, in situ generating the real active catalyst for HER.     

Gas-Sensing Activity of Amorphous Copper Oxide Porous Nanosheets

In this paper, the gas-sensing properties of copper oxide porous nanosheets in amorphous and highly crystalline states were comparatively investigated on the premise of almost the same specific surface area, morphology and size. Unexpectedly, the results show that amorphous copper oxide porous nanosheets have much better gas sensing properties than highly crystalline copper oxide to a serious of volatile organic compounds, and the lowest detection limit (LOD) of the amorphous copper oxide porous nanosheets to methanal is even up to 10 ppb. By contrast, the LOD of the highly crystalline copper oxide porous nanosheets to methanal is 95 ppb. Experiments prove that the oxygen vacancies contained in the amorphous copper oxide porous nanosheets play a key role in improving gas sensitivity, which greatly improve the chemical activity of the materials, especially for the adsorption of molecules containing oxygen-groups such as methanal and oxygen.     

Annealing effects on the microwave permittivity and permeability properties of Fe79Si16B5 microwires and their micowave absorption performances

This paper reports that amorphous magnetic microwires(Fe79Si16B5) have been fabricated by a melt-extraction technique and have been annealed at 600°C and 750°C respectively.Differential scanning calorimeter measurements show that nanocrystalline magnetic phase(α-Fe) has been formed in the amorphous matrix when it was annealed at 600°C.Hard magnetic phase(Fe2B) was formed in the microwires annealed at 750°C,which increases the magnetic coercivity.Microwave permittivity and permeability are found to be dependent on the microstructures.The permittivity fitting results show that multi Lorentzian dispersion processes exist.For microwires annealed at 750°C,their resonance peaks due to the domain wall movements and natural resonance are found higher than those of microwires annealed at 600°C.The microwave absorption performance of microwires annealed at 600°C is found better than microwires annealed at 750°C.     

前端接触势垒高度对非晶硅和微晶硅异质结太阳电池的影响

运用AMPS-1D（Analysis of Microelectronic and Photonic Structures） 程序系统分析了前端接触（铟锡氧化物）的势垒分别对非晶硅和微晶硅太阳电池性能的影响,比较了两种影响的差异并分析了具体原因. 研究表明：与微晶硅相比,非晶硅受铟锡氧化物功函数Φ_ITO的影响更加显著. 随着Φ_ITO的增加非晶硅的各项物理性能（如太阳电池效率、填充因子等）得到明显改善,而微晶硅的各项参数虽然也随Φ_ITO增加而改变,但更容易趋于饱和. 模拟结果显示,在实际的太阳电池装备过程中可根据前端电极的性能来选择合适的p型硅材料. 关键词： 铟锡氧化物 非晶硅 微晶硅 计算机模拟     

Ge2Sb2Te5非晶薄膜中超快载流子动力学的飞秒分辨反射光谱研究

利用飞秒时间分辨抽运-探测反射光谱技术研究了室温下Ge₂Sb₂Te₅非晶薄膜中载流子超快动力学及其激发能量密度依赖性.发现光激发后05 ps时间内,反射变化率降到最小值,然后开始迅速增加,在几个皮秒时间内达到大于初始反射率的新的最大值.反射率的减小量、增加量和增加速率均随激发能量密度的增大而增加.利用高密度等离子体的Auger复合及其感应的晶格加热模型较好地定量解释了反射率由最小到最大的快速变化过程,表明高密度等离子体的Auger复合加热 关键词： 抽运-探测光谱 2Sb₂Te₅非晶薄膜')" href="#">Ge₂Sb₂Te₅非晶薄膜 Auger复合 载流子动力学     

LS-SVM的梨可溶性固形物近红外光谱检测的特征波长筛选

为提高梨可溶性固形物含量(soluble solids content,SSC)的近红外光谱模型的精度和稳定性,以160个梨样品为实验对象,分别对原始光谱、多元散射校正(MSC)和标准正态变量变换(SNV)处理后的光谱,经无信息变量消除算法(UVE)挑选后,再结合遗传算法(GA)和连续投影算法(SPA),筛选梨可溶性固形物的近红外光谱特征波长。将筛选后的波长作为输入变量建立梨可溶性固形物的最小二乘支持向量机(LS-SVM)模型。结果表明经过SNV-UVE-GA-SPA从全波段3112个波长中筛选出的30个特征波长建立的梨可溶性固形物LS-SVM模型效果最好,该模型的预测集相关系数(R_p)和预测均方根误差(RMSEP)分别为0.956和0.271。该模型简单可靠,预测效果好,能满足梨的可溶性固形物含量的快速检测,为在线检测和便携式设备开发提供了理论基础。