Photoluminescence and Electroluminescence of Organic Light Emitting Diodes Based on Tris‐(8‐quinolinolato) Aluminum Nanoparticles

利用共沉淀方法制备出平均粒径为20nm的有机物8-羟基喹啉铝纳米粒子,8-羟基喹啉铝纳米粒子呈球形且粒度不随老化时间的增加而改变。本文研究了8-羟基喹啉铝纳米粒子的光致发光及基于8-羟基喹啉铝纳米粒子制作的电致发光器件的电致发光特性。8-羟基喹啉铝形成纳米粒子后,其光致发光及电致发光发射光谱的谱峰均出现蓝移。随着驱动电压的增加,器件中8-羟基喹啉铝纳米粒子的发射峰逐渐红移。在驱动电压为16伏时,8-羟基喹啉铝纳米粒子器件的最大亮度达600cd/m²,电流密度为150mA/cm^-2时,器件的发光效率为0.19cd/A。基于8-羟基喹啉铝纳米粒子器件的发射光谱证实了AlQ₃纳米粒子具有量子尺寸效应的存在,这为有机纳米电致发光器件的研究开辟了一条新的研究路线,同时也为那些传统的有机材料如有机分子晶体的基础研究探索出新的研究方向。     

Synthese und Kristallstruktur einer Neuen hexagonalen Modifikation von Al2S3 mit fünffach koordiniertem Aluminium

Synthesis and Crystal Structure of a Novel Hexagonal Modification of Al₂S₃ with Five-coordinated Aluminum A new hexagonal high temperature modification of Al₂S₃ could be prepared by chemical vapour transport with iodine (860 → 750°C) or by annealing of α -Al₂S₃ at 550°C. According to the single crystal X-ray structure determination the novel form of Al₂S₃ crystallizes in space group P 6₁ (No. 169) with a = 6.491(1), c = 17.169(4) Å, V = 626.5 ų, Z = 6; R = 0.0253. In this modification one half of the aluminum atoms are tetrahedrally coordinated [d(Al? S): 2.226–2.267 Å], whereas the other half are in trigonal bipyramidal coordination of five S atoms with bond lengths of 2.272–2.315 Å (equatorial) and 2.495–2.521 Å (axial). Aluminum in AlS₅ coordination is observed for the first time in this compound. The crystal structure is isotypic to In₂Se₃ and AlInS₃. In addition, results of a refinement of the α -Al₂S₃ crystal structure are reported which were obtained on crystals prepared also by chemical vapour transport with iodine.     

Fe K‐Edge X‐ray Absorption Fine Structure Determination of γ‐Al2O3‐Supported Iron‐Oxide Species

The structure of FeO_x species supported on γ‐Al₂O₃ was investigated by using Fe K‐edge X‐ray absorption fine structure (XAFS) and X‐ray diffraction (XRD) measurements. The samples were prepared through the impregnation of iron nitrate on Al₂O₃ and co‐gelation of aluminum and iron sulfates. The dependence of the XRD patterns on Fe loading revealed the formation of α‐Fe₂O₃ particles at an Fe loading of above 10 wt %, whereas the formation of iron‐oxide crystals was not observed at Fe loadings of less than 9.0 wt %. The Fe K‐edge XAFS was characterized by a clear pre‐edge peak, which indicated that the Fe?O coordination structure deviates from central symmetry and that the degree of Fe?O?Fe bond formation is significantly lower than that in bulk samples at low Fe loading (<9.0 wt %). Fe K‐edge extended XAFS oscillations of the samples with low Fe loadings were explained by assuming an isolated iron‐oxide monomer on the γ‐Al₂O₃ surface.     

Fluorine plasma treatment of bare and nitrilotris(methylene)triphosphonic acid (NP) protected aluminum: an XPS and ToF‐SIMS study

Nitrilotris(methylene)triphosphonic acid (NP) is a technologically important molecule that has been used for years as a corrosion inhibitor and/or adhesion promoter on aluminum and other metal surfaces. However, to the best of our knowledge, the detailed surface characterization of NP adsorbed on aluminum, or on any other surface, has not been reported. Herein, we report an X‐ray photoelectron spectroscopy and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) analysis of a series of untreated and NP‐coated aluminum substrates that were exposed to the downstream products of a fluoroalkane + oxygen plasma for different amounts of time (from 0 to 20 s). As indicated by P 2p, N 1s, Al 2p, O 1s, and F 1s narrow scans, even a 4‐s plasma treatment significantly damages the NP protective layer and converts the native aluminum oxide into aluminum oxyfluoride. Heat treatment of the fluorine plasma‐treated samples in the air substantially converts the aluminum oxyfluoride back to aluminum oxide, while similar heating under vacuum results in little change to the materials. A slow loss of fluorine from the samples occurs over the course of weeks when they are stored in the air. A ToF‐SIMS analysis reveals sets of signals that are consistent with no surface treatment, NP treatment, or fluorine plasma treatment. A principal component analysis of the negative ion ToF‐SIMS spectra from the samples shows the expected differentiation of the samples. Copyright © 2014 John Wiley & Sons, Ltd.     

A New Fluorescence Turn-On Probe for Aluminum(III) with High Selectivity and Sensitivity,and its Application to Bioimaging

The development of novel selective probes with high sensitivity for the detection of Al³⁺ is widely considered an important research goal due to the importance of such probes in medicine, living systems and the environment. Here, we describe a new fluorescent probe, N′-(4-diethylamino-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (1), for Al³⁺. Probe 1 was evaluated in a solution of acetonitrile/water (1:1 v/v). Compared with previously reported probes for Al³⁺, probe 1 can be synthesized easily and in high yield. A Job plot confirmed that probe 1 is able to complex Al³⁺ in a 1:1 ratio, and the binding constant was determined to be 4.25×10⁸ m⁻¹. Moreover, the detection limit was as low as 6.7×10⁻⁹ m, suggesting that probe 1 has a high sensitivity. Common coexistent metal ions, such as K⁺, Co²⁺, Ca²⁺, Ba²⁺, Ni²⁺, Pb²⁺, Hg²⁺, Ce²⁺, Zn²⁺, Cd²⁺, Fe³⁺, showed little or no interference in the detection of Al³⁺ in solution, demonstrating the high selectivity of the probe. Finally, the ability of probe 1 to act as a fluorescent probe for Al³⁺ in living systems was evaluated in Gram-negative bacteria, Escherichia coli, and confocal laser scanning microscopy confirmed its utility. The results of this study suggest that 1 has appropriate properties to be developed for application as a fluorescent probe of Al³⁺ for use in biological studies.     

泡沫铝负载钌基催化剂应用于N2O的低温催化分解研究

将导热性能良好的泡沫铝作为载体,羰基钌为前驱体制备了一系列不同形态的钌基催化剂应用于N2O的低温催化分解研究.采用XRD、XPS、SEM、TEM、BET、H2-TPR等方法对催化剂进行了表征,于石英管固定床反应器上对催化剂性能进行了评价.重点考察了泡沫铝作为催化剂载体的可行性、载体的处理方法对催化剂活性的影响以及RuO2、Ru、Ru3(CO)12所表现出的活性差异.结果表明:泡沫铝作为催化剂载体,能够促进N2O的催化分解;泡沫铝经H2O2处理有利于提高其对活性中心的附着力,提高催化活性;N2O浓度为1%,Ru负载量为0.3%,活性中心分别为Ru3(CO)12、Ru、RuO2时,N2O完全转化温度依次为285、380和415℃;活性较高的Ru3(CO)12/泡沫铝催化剂在长时间作用后活性组分转变为RuO2.     

Studies on the kinetics of growth of silver nanoparticles in different surfactant solutions

We produced gels using electrolytic-reduction ion water and magnesium aluminum silicates (smectone^®), and evaluated in detail gel properties in the presence of various types of salt (NaCl, KCl, CaCl₂, MgCl₂, and AlCl₃). Each salt was added to deionized-distilled water or electrolytic-reduction ion water, and phase diagrams for the smectone^® concentration (2.0–4.0%) were produced. The areas of the three phases of smectone^® (gel, sol, and separation) at each salt concentration were expressed as percentages of the total area. As a result, uni- and polyvalent cations (excluding Ca²⁺ ions) affected the stability of gels produced using electrolytic-reduction ion water, and, particularly, univalent cations (Na⁺, K⁺) markedly improved gel stability.Using electrolytic-reduction ion water as a dispersal medium, drug delivery systems (DDS) that can maintain the gelling state can be prepared. Thus, gel preparations with maintained functions or controlled-release transdermal drugs can be obtained.     

嫁接Al改性MCM-41介孔分子筛催化合成双酚F

以十六烷基三甲基溴化铵和正硅酸乙酯为原料,合成纯硅MCM-41介孔分子筛。 再利用九水硝酸铝为改性剂来嫁接改性纯硅MCM-41介孔分子筛,NH3-TPD结果表明,嫁接后的AlMCM-41产生了中强酸。 用改性后不同n(Si)/n(Al)的AlMCM-41催化合成双酚F,在n（苯酚）/n（甲醛）=30、反应时间5 h、反应温度90 ℃、m（甲醛）/m（AlMCM-41）=7的反应条件下,在一定范围内,双酚F的产率随Al含量增加而增加,但在n（Si）/n（Al）＜50时,双酚F的产率反而下降,当n（Si）/n（Al）=50时,双酚F的产率最高,为42.28%。