贫水电解质体系制备多孔阳极氧化铝模板的研究

在有机溶剂为主的含草酸电解质中,研究了大孔径有序度高的阳极氧化铝(AAO)的一步法电化学制备.实验证实,电解质中水含量的降低能够有效抑制铝的电氧化速率和溶解速率,使得其氧化膜孔道的生长能够稳定进行,所得到的六方孔道排列有序度明显高于纯水溶剂制备的电解质体系下的产物.考察了水含量、有机溶剂种类以及电解质浓度对AAO模板孔道形貌的影响.结果表明,有机溶剂贫水电解质体系使得电氧化电压的选取范围比水溶液电解质体系更宽,孔径连续可调,反应条件温和.该方法适合于制备均匀大孔径的AAO模板.     

Enhanced glucose production from cellulose using coimmobilized cellulase and β-glucosidase

β-Glucosidase was covalently immobilized alone and coimmobilized with cellulase using a hydrophilic polyurethane foam (Hypol®FHP 2002). Immobilization improved the functional properties of the enzymes. When immobilized alone, the K_m for cellobiose of β-glucosidase was decreased by 33% and the pH optimum shifted to a slightly more basic value, compared to the free enzyme. Immobilized β-glucosidase was extremely stable (95% of activity remained after 1000 h of continuous use). Coimmobilization of cellulase and β-glucosidase produced a cellulose-hydrolyzing complex with a 2.5-fold greater rate of glucose production for soluble cellulose and a four-fold greater increase for insoluble cellulose, compared to immobilized cellulase alone. The immobilized enzymes showed a broader acceptance of various types of insoluble cellulose substrates than did the free enzymes and showed a long-term (at least 24 h) linear rate of glucose production from microcrystalline cellulose. The pH optimum for the coimmobilized enzymes was 6.0. This method for enzyme immobilization is fast, irreversible, and does not require harsh conditions. The enhanced glucose yields obtained indicate that this method may prove useful for commercial cellulose hydrolysis.     

Al3Ti1B1RE细化剂对罐用铝材的细化效果及稀土的作用

采用XRD，OM，SEM，EDAX等探讨了一种新型Al3Ti1B1RE中间合金细化剂对罐用铝材的细化效果及RE的作用。结果表明，该细化剂对罐用铝材的细化效果优于进口和国产Al3Ti1B，且具有长效性，达6h后仍未见明显衰退，明显提高了该材料的强度和塑性；其细化效果及稳定性好的主要原因是：RE可降低铝液的表面能，增加铝液对细化核心(如TiAl3，TiB2)的润湿性，既充分发挥了异质形核作用，又防止了TiB2聚集沉淀倾向；RE也极易在结晶前沿富集造成成分过冷，阻碍了α-Al晶粒生长，并促进其在细化核心上形核；此外RE还兼有一定的净化、细化和变质作用，尤其是净化作用提高了该细化剂的冶金质量。     

钇对2618合金组织及性能的影响

采用X射线，光学显微镜及扫描电镜等手段研究了2618合金中的组织与相结构，并研究了元素钆在2618合金中的存在形式及其对合金力学性能的影响。结果表明，微量钆元素在铝合金中是以化合物形式存在的；钆对合金中的铸态组织及Al9FeNi仃形态没有影响。由于微量钆的加入，降低了铜与镁在2618合金中的固溶量，减少了时效析出相A2CuMg数量，从而降低2618合金的室温强度帮在250℃的高温瞬时强度；但由于微量钆减少了铜与镁在2618合金中的扩散速度，延缓了时效机的粗化，并由于第二相数量的增多，因此提高了2618合金在250℃经100h高温热暴露后的高温瞬时强度。     

单一稀土Ce, La和混合稀土在工业纯铝中的作用

通过对比实验的方法，研究了稀土Ce，La和混合稀土对工业纯铝组织、电性能和机械性能的影响。结果表明：单一稀土La，Ce可降低工业纯铝的电阻率，提高工业纯铝的导电性，其中La的效果优于Ce．而混合稀土对电阻率几乎无影响；La，Ce和混合稀土均能减小工业纯铝的晶粒度，在其加入量为0．1％后细化效果明显，当其含量大于0．5％后细化效果趋于平缓，其中Ce的效果最佳，La次之，混合稀土最弱；单一稀土La，Ce在一定含量时可提高工业纯铝的σb6和δ，Ce的作用强于La，混合稀土对σb和δ的影响不明显。     

Effect of Pluronic F127 on the pore structure of macrocellular biodegradable polylactide foams

Thermally induced phase separation technique was utilized to fabricate biodegradable poly(l ‐lactic acid) (PLLA) macrocellular foams which were capable of being applied in tissue engineering. The block copolymer Pluronic F127 composed of (polyethyleneoxide)‐(polypropyleneoxide)‐(polyethyleneoxide) [(PEO)‐(PPO)‐(PEO)] was used as a porogen. Water/dioxane mixtures with different volume ratios were used as solvents. The addition of Pluronic F127 could induce an appearance of large pores (50–200 μm) besides small pores (10–20 μm) or a change from a solid–liquid phase separation to a liquid–liquid phase separation. The role of Pluronic F127 depends on the water/dioxane ratios in the PLLA/dioxane/water system. The X‐ray diffraction patterns and porosity measurement results showed that Pluronic F127 was crystallized and existed on the pore wall. The effect of Pluronic F127 on changing pore structure is attributed to the occurrence of the interaction of the lipophilic PPO blocks in Pluronic F127 with PLLA clews, consequently, this results in PLLA aggregation and early phase separation on cooling. Copyright © 2004 John Wiley & Sons, Ltd.     

CuCrAl和CuCrZr低温液相合成甲醇催化剂的研究

 用络合共沉淀法制备了CuCrAl和CuCrZr复合氧化物液相合成甲醇催化剂，其比表面分别达到119和116m2／g．在5．0～5．5MPa和383K条件下，分别用间歇式和流动式反应釜考察了催化剂的活性和稳定性．结果表明：CuCrAl和CuCrZr的活性均明显高于CuCr；CuCrAl的活性略高于CuCrZr，但甲酸甲酯（MF）的选择性明显低于CuCrZr；两者在12h内未见活性明显下降．甲醇钠在反应过程中部分转化为甲酸钠和NaOH．CuCrAl和CuCrZr有较高的氢解活性可抑制甲醇钠与MF生成甲酸钠，从而有较低的甲酸钠浓度．但是，Al2O3和ZrO2的酸性有利于甲醇脱水，引起甲醇钠水解生成NaOH．溶剂对CuCr基催化剂的活性和选择性有明显影响．对反应机理进行了讨论．     

Non-solvated aluminum hydride. Crystallization from diethyl ether-benzene solutions

Crystallization of non-solvated aluminum hydride from a diethyl ether-benzene mixed solvent was studied. The desolvation of AlH₃·(Et₂O)_x etherate in solution and the crystallization of α-AlH₃ during polythermal heating of the solution occur only in the presence of ≥10 wt.% LiAlH₄. The process is multistage, and the crystallization begins with the formation of the AlH₃·0.25Et₂O solvate, which recrystallizes in the solid phase into γ-AlH₃ and then α-AlH₃. Four crystalline modifications of aluminum hydride were characterized by X-ray diffraction and electron microscopy. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1259–1265, July, 2007.     

新型酰腙类荧光探针的合成及其对Al(Ⅲ)的传感性质

合成了两个酰腙类荧光探针1和2,在DMSO-H_2O(7∶3,体积比)体系中,两者分别在478 nm和460 nm处对Al~(3+)具有较好的荧光选择识别作用。Job's法、核磁滴定、质谱分析表明,探针1和2与Al~(3+)的配位比均为1∶2,且对Al~(3+)的检出限分别为9.58×10~(-8) mol/L和6.52×10~(-8) mol/L。同时提出了探针1和2对Al~(3+)的荧光传感机理。实际应用研究表明,探针1和2可用于河水和自来水中一定浓度范围内Al~(3+)的检测。