Synthesis and characterization of highly random copolymer of ϵ-caprolactone and D,L-lactide using rare earth catalyst

Highly random copolymers of ϵ-caprolactone (CL) and D ,L -lactide (LA) were synthesized by a new catalyst system, rare earth chloride–propylene oxide (PO) system. In the presence of propylene oxide, all rare earth chlorides tested are highly effective for the copolymerization. The influences of reaction conditions on the copolymerization catalyzed by the NdCl₃-5PO system have been investigated in detail. The reactivity ratios of ϵ-caprolactone and D ,L -lactide were determined and show that the copolymerization with this new rare earth catalyst is closer to ideal copolymerization than reported for other catalysts. The microstructure of copolymer analyzed by ¹³C-NMR shows that the monomer units in the copolymer is near to completely random distribution with a short average monomer sequence length. The DSC measurement confirms the high randomness of the chain structure. The mechanism studied by NMR indicates that the rare earth alkoxide generated by the reaction of rare earth chloride with propylene oxide initiates the copolymerization, and then proceeds via a “coordination-insertion” mechanism with acyl-oxygen bond cleavage of CL and LA. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of copoly(arylene sulfide)s

Copolymerizations of p-dichlorobenzene (DCB)/4-bromophenyl ether (BPE), DCB/4,4′-dibromobiphenyl (DBB), and DBB/BPE pairs with sodium sulfide under high temperature (270–290°C) utilizing N-methyl-2-pyrrolidinone (NMP) as solvent were carried out to give C(DCB/BPE), C(DCB/DBB), and C(DBB/BPE) copolymers, respectively. The reactivity of dihaloaromatic monomers toward thiolate anion in the polycondensation reaction followed the order DBB > DCB > BPE. The reactivity gap between DBB and DCB toward thiolate anion seemed to be smaller than that between BPE and DCB, resulting in both high yield and high molecular weight in the C(DCB/DBB) copolymers compared to C(DCB/BPE) copolymers. The copolymerization of DBB/BPE pair with sodium sulfide, which has larger reactivity gap than the DCB/DBB or DCB/BPE pair, gave mixtures of PBS and PPSE homopolymers especially in the range of 50–80 mol % BPE in the feed. The C(DCB/DBB) and C(DCB/BPE) copolymers, however, exhibited random copolymer character in all comonomer ratios in the feed as evidenced by copolymer composition and DSC data. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2311–2317, 1999     

铁铬系高（中）温变换催化剂研究现状

本文介绍和评述了国内外铁铬系高（中）温变换催化剂的现状和研究动态,其中包括铁铬系高温变换催化剂的应用和研究意义、变换反应的机理以及各种助剂的影响,并指出了该研究的发展趋势。     

氨基羧酸纤维分离富集-电感耦合等离子体原子发射光谱法测定多种痕量稀土元素

本文制备了氨基羧酸纤维滤纸片作为柱填充物，成功地分离和富集了地化样品中的多种稀土元素。富集后的稀土元素采用电感耦合等离子体原子发射光谱法测定，回收率为90％～109％。本文还对基体干扰及其消除进行了研究。     

Studies of a new series of ion-pair complexes [Mo(dtc)_4][Ln(dtc)_4] (Ln=La-Er,exp.Pm)

A new series of ion-pair complexes [Mo(dtc)4][Ln(dtc)4] (Ln=La-Er, exp. Pm) were synthesized from MoCl5, LnCl3 and Nadtc in anhydrous methanol. The crystal structures of the four complexes, [Mo(dtc)4][Ln(dtc)4] (Ln=Nd, Sm, Ho and Er) have been determined by X-ray diffraction. Spectroscopic properties of all these complexes are also discussed here.     

Group 6-group 10 heterobimetallic complexes with sulfur ligands

Complexes that contain both a group 6 group 10 metal combination and a sulfur bound ligand form a growing set of species. Their chemistry is discussed and reviewed. Ligands that bind to such heterobimetallic molecules most commonly are S^2– and SR^– species. Metal-metal bonded complexes, and compounds where metal-metal interactions are minimal are both discussed. The structural parameters for many of the crystallographically characterized complexes are tabulated.     

Optimization of alkali-alkalkine earth cation separation on weak cation-exchangers

Summary The elution behavior of alkali and earth alkaline cations has been studied on a newly synthesized weak cationexchanger (WCX). Applying this stationary phase isocratic separation of these cations is possible. The dependence of retention on competing ion concentration is described via a simple model. The influence of crown ethers as well as organic eluent additives on selectivity and peak efficiency is demonstrated. With optimized separation such cations can be determined with detection limits of about 0.5 ppm using a conductivity detector without ion suppression.     

Crystallographic evidence of hexacoordination at phosphorus via intramolecular coordination of donor groups on phosphane and phosphane sulphide

The X-ray structure analysis of bis(8-dimethylamino-l-naphthyl)phenylphosphane (3) and of the corresponding sulphide 4 has revealed hexacoordination at phosphorus in both cases, the N … P separations being less than the sum of the van der Waal radii. Furthermore, in both cases the overall geometry corresponds to a distorted bicapped tetrahedron. The optimum geometry calculated for 4 via the program developed by Autodesk (MM + method) suggests that the structure of the molecule is a function not only of steric requirements but also of electronic effects.     

Study of the Influence of Alkaline Ions (Li, Na and K) on the Structure of the Silicate Entities in Silico Alkaline Sol and on the Formation of the Silico-Calco-Alkaline Gel

The study of silico-calco-alkaline gel is essential to warn against the degradation of concrete due to the alkali-silica reaction. In the laboratory, those gels are simulated by the destabilization of a silico-alkaline sol by calcium ions. Their speed of formation depends on the alkali species. The influence of alkaline ions (Li, Na and K) on the structure of silicate entities in sol and on the gel formation has been studied. The state of polymerization of the silico-alkaline sol was determined by NMR and depends on the alkali species and the molar ratio (Rm = [SiO2]/[A2O] with A = Li, Na or K). It appears that lithium enhances the polymerization. By scattering techniques (SAXS and ELS), the evolution of size and number of scattering particles during gelation can be determined from scattering curves with Guinier approximation. The mechanism of gelation appears as a hierarchic structure composed of several discrete sizes.     

Ion-Channel – Mimetic Sensors Based on Self-Assembled Monolayers of Phosphate Esters: High Selectivity for Trivalent Cations

 Gold electrodes were chemically modified with a phosphate ester monolayer designed to mimic biological ion-channel membranes. Cyclic voltammograms of Fe(CN)₆ ³⁻ as electroactive marker were measured in the presence of various types of analyte cations. Whereas in the absence of analyte cations the marker reduction was hindered by electrostatic repulsion between the marker anions and phosphate groups of the receptor monolayer, binding of di-and trications to the monolayer resulted in large increases of the reduction current. Trivalent cations could be detected down to the submicromolar concentration range with excellent selectivities over alkali metal ions. Also divalent cations were well discriminated and similar responses as to trivalent cations were only observed if their concentration exceeded that of the trivalent cations by about two orders of magnitudes. Received August 24, 1998. Revision March 10, 1999.