Production of submicron-sized multihollow polymer particles by alkali/cooling method

Submicron-sized styrene-methacrylic acid copolymer particles, which were produced by emulsion copolymerization, were changed to those having multihollow structure by treating stepwise the emulsion as follows. First alkali treatment was carried out at higher temperature than the glass transition temperature and subsequently the emulsion was cooled by keeping it at room temperature. This was named alkali/cooling method. The effects of methacrylic acid content, pH, time and temperature in the alkali treatment on the formation of multihollow structure were clarified.Part CLV of the series Studies on suspension and emulsion     

The analysis of lubricating oil additives by supercritical fluid chromatography with packed and open tubular capillary columns

Lubricating oil additives have been analyzed by supercritical fluid chromatography on open tubular and packed capillary columns. Carbon dioxide and modified carbon dioxide were used as mobile phases and detection was accomplished by flame ionization and micro UV. Rapid and efficient analysis of the lubricating oil additives was demonstrated.     

Effect of some additives on the reactions in fly ASH-Ca(OH)2 system

Differential thermal analysis and thermogravimetry were used to evaluate the effect of some additives, such as CaSO₄, CaCl₂ and silica fume amorphous silica from ferrosilicon synthesis on the mechanism and kinetics of reactions occurring in fly ash-Ca(OH)₂ system. The accelerating role of these additives was demonstrated from the data relating to Ca(OH)₂ consumption in hydrated pastes, determined by TG measurements. This revised version was published online in July 2006 with corrections to the Cover Date.     

Comparative studies on a mesophilic and a thermophilic α-amylase

A comparative study was performed on thermal stability of mesophilic and thermophilic α-amylases, and the effects of various denaturing agents, organic solvents, and stabilizers were investigated. As expected, the thermophilic enzyme showed higher resistance toward denaturation in water as its natural medium, but such a difference could not be detected in nonaqueous environments. Furthermore, stability of these molecules was improved by including various stabilizing agents. Of the compounds tested, sorbitol provided the highest degree of protection, which was found to be owing to its effect on increasing T _m and its ability in totally preventing deamidation of amino acid residues in the protein molecules.     

纳米核壳式铜-锡双金属粉的制备及性能研究

A kind of novel core-shell Cu-Sn bimetallic nanoparticles has been prepared by a new method (displacement method), in which Sn was made to cover on the surface of Cu nano-core. The preparation method and reaction mechanism have been discussed. This reaction happened under the existence of coordinate agent-(NH₂)₂CS and protective agent PVP. The nanoparticles prepared were with a core-shell structure, granule diameter between 50～100 nm and good dispersing capability. The Cu-Sn nanoparticles proposed has better oxidation-resistant ability than Cu nanoparticles with corresponding granule diameter and can be applied as lubricant additives as well as antibacterial agent. When the additive amount is very low (0.1wt‰～0.5wt‰), it can improve the P_B of the lubricant by 92%～106%, and also enhance its antiwear characteristics and friction-reducing properties. At the concentration of 1 000 ppm, it can reach an antibacterial ratio of 99.99%.     

Freezing points,osmotic coefficients,and activity coefficients of some salts in ethylene carbonate: A high dielectric constant solvent without hydrogen bonding

The freezing points, conductivities, and densities of NaI, KI, CsI, Bu₄NCl, Bu₄NBr, Bu₄NI, Et₄NBr, and Pr₄NBr (where Et = ethyl, Pr = propyl, and Bu =n-butyl) in ethylene carbonate have been measured. Osmotic and activity coefficients were calculated from the results. All of the salts studied are strong electrolytes. The trends in the osmotic coefficients of the alkali metal iodides are NaI>KI>CsI, showing that Na⁺ is more solvated by ethylene carbonate than Cs⁺. For the tetraalkylammonium halides, the order of osmotic coefficients are Et₄NBrPr₄NBrBu₄NCl>Bu₄NBr>Bu₄NI. This is the same order as observed in two other high-dielectric-constant solvents, water andN-methylacetamide. The results indicate that the smaller anions are more solvated than the larger anions in ethylene carbonate in contrast to the usual behavior of dipolar aprotic (basic) solvents, such as dimethyl sulfoxide.     

Ammoxidation of methylpyrazine over phosphorus-modified vanadium-titanium catalysts

Vanadium-titanium catalysts modified with phosphorus additives (1-15 wt.% of P₂O₅) have been studied in methylpyrazine ammoxidation. Introduction of high amounts of the additive (≥ 10 wt.% of P₂O₅) results in a decrease in activity and selectivity of the catalysts due to formation of low active phase - a ternary compound with the component ratio V : P : Ti ≈ 1 : 1 : 1 with only one type of slightly distorted tetrahedral vanadium (5+) bound via oxygen to phosphorus (5+). The nature of the active sites of the samples modified with 1-5 wt.% of P₂O₅, similarly to that in the V-Ti-O catalyst, was found to include the V⁵⁺ cations strongly bound with TiO₂ and located in the significantly distorted octahedral oxygen environment. This revised version was published online in June 2006 with corrections to the Cover Date.     

Free energies of transfer of alkali halides from water to urea-water mixtures at 25°C from EMF measurements

The standard potentials_s E ^o of M/M⁺ (M=Li, Na, K, Rb, and Cs) electrodes in aqueous urea solutions containing 12, 20, 30 and 37% by weight of urea have been determined at 25°C from emf measurements on the cell M(Hg)/MCl (m), solvent/AgCl–Ag, from the activities of metals in amalgams by use of a similar type of cell in water, and from the values of_s E ^o of the Ag/AgCl electrode determined earlier. The standard free energies of transfer of MCl, G _t ^o (MCl), from water to the mixed solvents, computed by use of these values and those for the Ag–AgCl electrode, rise sharply from Li⁺ to Na⁺ but fall from Na⁺ to K⁺ and rather sharply from K⁺ to Cs⁺ with a maximum at Na⁺ in all the solvent compositions. This has been attributed to the superimposition of soft-soft interactions on the electrostatic interactions between the ions and the negative charge centers of the possible hydrogen-bonded solvent complexes in the mixed solvents. Comparison of G _t ^o (i) values for individual ions, obtained by a simultaneous extrapolation procedure, with those in aqueous mixtures of methanol,t-butanol, and dimethyl sulfoxide leads to the conclusion that the solvation of these ions in all these solvents is chiefly dictated by the acid-base type of ion-solvent interactions.     

A conductance study of the association of alkali cations with 1,13-dibenzo-24-crown-8 in acetonitrile

A conductance study concerning the association of Na⁺, K⁺, Rb⁺, and Cs⁺ with 1,13-dibenzo-24-crown-8 in acetonitrile has been carried out at 35, 30, 25, 20, and 15°C. The observed molar conductivities were found to decrease significantly for mole ratios less than unity. A model involving 11 stoichiometry has been used to analyze the conductivity data. The stability constant, K, and the molar conductivity _C for each 11 complex were determined from the conductivity data by using a nonlinear least squares curve fitting procedure. The binding sequence, based on the value of log K at 25°C, is found to be Rb⁺>Cs⁺>K⁺>Na⁺. Values of H^o and S^o are reported and their significance is discussed.