Synthesis and electrochemical properties of a novel calix[4]arene derivative for facilitated transfer of alkali metal ions across water/1,2-dichloroethane micro-interface

The alkali metal ion transfers facilitated by a novel calix[4]arene derivative (OPEC) across the water/1,2-dichloroethane (1,2-DCE) micro-interface supported at the tip of a micropipette were presented. The well-defined voltammetric behaviours except Cs⁺ was obtained by cyclic voltammetry and differential pulse voltammetry. The bulk concentration of metal ions was much higher than that of OPEC in the performed measurements. The diffusion coefficient of OPEC in the 1,2-DCE phase was calculated as 5.18 ± 0.70 × 10^? 6 cm² s^? 1. On the basis of the changes of the half-wave transfer potentials, the logarithms of the association constants having 1:1 ionophore–ion complex stoichiometry for Li⁺, Na⁺, K⁺ and Rb⁺ in 1,2-DCE were determined as 4.80, 4.62, 4.98 and 5.32, respectively. The facilitated ion transfers were also evaluated by the Randles equivalent circuit used for ac-impedance data analysis.     

Alkali metal and ammonium cation–arene interactions with tetraphenylborate anion

Sodium, potassium, rubidium, caesium, ammonium and tetramethylammonium tetraphenylborates were studied by both positive and negative ion electrospray mass spectrometry. An affinity order of Cs⁺ > Rb⁺ > K⁺ ～ Na⁺ was obtained. The results obtained were compared with both calculations and solid-state structures, where available. The previously reported high affinity of caesium for tetraphenylborate concluded from NMR experiments was confirmed for the gas phase. The affinity does not appear to result from steric effects and a cation–pi interaction seems likely. In the positive ion mode, a unique acetonitrile complex of NaBPh₄ was observed.     

The role of the solvation shell decomposition of alkali metal ions in their selective complexation by resorcinarene and its cavitand

2-Methylresorcinarene and its methylene-bridged cavitand derivative as host compounds were investigated in selective complexation of alkali metal ions as guests in methanol media by photoluminescence measurements. These host molecules possess either flexible (2-methylresorcinarene) or rigid (cavitand) molecular skeleton. The Benesi–Hildebrand method and the van't Hoff theory have been applied to determine the stability constants and the thermodynamic parameters, respectively. Considerable interactions between 2-methylresorcinarene and Li⁺ or Na⁺ ions have been observed while the rigid cavitand derivative can interact only with K⁺ or Cs⁺ ions. Neither the complexes of 2-methylresorcinarene with K⁺ or Cs⁺ nor those of the cavitand derivative with Li⁺ or Na⁺ ions are stable at room temperature in methanol media. Quantum-chemical investigations justified that only solvated Li⁺ and Na⁺ ions can form stable complexes with 2-methylresorcinarene while unsolvated K⁺ and Cs⁺ ions form stable complexes with the methylene-bridged cavitand. These results highlight that the stability of the guest solvation shell and its size could play a key role in the selectivity behaviour of host molecules.     

Calculations of dynamic dipole polarizabilities of Li and Na atoms in debye plasma using the model potential technique

The effects of Debye plasma on the frequency‐dependent polarizabilities of Li and Na atoms are investigated using symplectic algorithm within the framework of the pseudostate summation technique. Dynamic dipole polarizabilities of Li (2s ²S) and Na(3s ²S) as functions of scaled number density of the plasma electrons for arbitrary plasma temperature are presented. Screening effects on the resonance frequencies are also presented. In free‐atomic cases, our calculated results are comparable with the reported theoretical and experimental predictions. © 2012 Wiley Periodicals, Inc.     

Efficient and Industrially Viable Synthesis of Donepezil

An efficient, economically viable process has been developed for large‐scale preparation of donepezil HCl (1), an anti‐Alzheimer's agent. The process involves the condensation of 5,6‐dimethoxy‐1‐indanone (3) and 1‐benzyl‐4‐piperidinecarboxaldehyde (4) in the presence of alkalimetal carbonates at elevated temperature to yield 1‐benzyl‐4‐[(5,6‐dimethoxy‐1‐indanone)‐2‐yidenyl] methyl piperidine (2), the key intermediate in the synthesis of donepezil. Hydrogenation of 2 yields donepezil.     

Core/Shell Structured PCM Nanocapsules Obtained by Resin Fortified Emulsion Process

Phase change material (PCM, octadecane) nanocapsules were successfully prepared by resin fortified emulsion (RFE) polymerization using the alkali soluble resin (ASR) of poly(ethylene‐co‐acrylic acid) (EAA) and poly(styrene‐co‐acrylic acid) (SAA). Stable PCM nanocapsules were obtained by resin fortified emulsion polymerization, which could be attributed to the prevention of Ostwald ripening due to PCM being hydrophobic. Analysis of online FTIR measurements throughout the reaction confirmed that the nanocapsules contained octadecane as a PCM. TEM imaging of the PCM nanocapsules showed spherical and core/shell morphology. The characteristics of PCM nanocapsules can be controlled by process parameters. As a result, the particle size and particle size distribution (i.e., polydispersity index (Dw/Dn)) of the PCM nanocapsules were created by adjusting manufacturing conditions. The PCM nanocapsules exhibited thermal energy storage (～49.8 J/g) and release (～47.9 J/g) behavior.     

Lyotropic Liquid Crystal to Soft Mesocrystal Transformation in Hydrated Salt–Surfactant Mixtures

Hydrated CaCl₂, LiI, and MgCl₂ salts induce self‐assembly in nonionic surfactants (such as C₁₂H₂₅(OCH₂CH₂)₁₀OH) to form lyotropic liquid‐crystalline (LLC) mesophases that undergo a phase transition to a new type of soft mesocrystal (SMC) under ambient conditions. The SMC samples can be obtained by aging the LLC samples, which were prepared as thin films by spin‐coating, dip‐coating, or drop‐casting of a clear homogenized solution of water, salt, and surfactant over a substrate surface. The LLC mesophase exists up to a salt/surfactant mole ratio of 8, 10, and 4 (corresponding to 59, 68, and 40 wt % salt/surfactant) in the CaCl₂, LiI, and MgCl₂ mesophases, respectively. The SMC phase can transform back to a LLC mesophase at a higher relative humidity. The phase transformations have been monitored using powder X‐ray diffraction (PXRD), polarized optical microscopy (POM), and FTIR techniques. The LLC mesophases only diffract at small angles, but the SMCs diffract at both small and wide angles. The broad surfactant features in the FTIR spectra of the LLC mesophases become sharp and well resolved upon SMC formation. The unit cell of the mesophases expands upon SMC transformation, in which the expansion is largest in the MgCl₂ and smallest in the CaCl₂ systems. The POM images of the SMCs display birefringent textures with well‐defined edges, similar to crystals. However, the surface of the crystals is highly patterned, like buckling patterns, which indicates that these crystals are quite soft. This unusual phase behavior could be beneficial in designing new soft materials in the fields of phase‐changing materials and mesostructured materials, and it demonstrates the richness of the phase behavior in the salt–surfactant mesophases.     

Mechanism of Ketone Allylation with Allylboronates as Catalyzed by Zinc Compounds: A DFT Study

The mechanism of the allylation reaction between 4‐chloroacetophenone and pinacol allylboronates catalyzed by ZnEt₂ with alcohols was investigated using density functional theory (DFT) at the M05‐2X/6‐311++G(d,p) level. The calculations reveal that the reaction prefers to proceed through a double γ‐addition stepwise reaction mechanism rather than a Lewis acid‐catalyzed concerted one. The intermediate with a four‐coordinated boron center, which is formed through proton transfer from EtOH to the ethyl group of ZnEt₂ mediated by the boron center, is the active species and an entrance for the catalytic cycle. The latter is composed of three elementary steps: 1) boron to zinc transmetalation leading to the formation of allylzincate species, 2) electrophilic addition of ketone to allylzincate species, and 3) generation of the final product with recovery of the catalyst. The boron to zinc transmetalation step has the largest energy barrier of 61.0 kJ mol^?1 and is predicted to be the rate‐determining step. The calculations indicate that the additive EtOH plays important roles both in lowering the activation free energy for the formation of the four‐coordinated boron active intermediate and in transforming the low catalytic activity ZnEt₂ into high activity zinc alkoxide species. The alcohols with a less sterically encumbering R group might be the effective additives. The substituted groups on the allylboronates might primarily affect the boron to zinc transmetalation, and the allylboronates with substituents on the C_γ atom is poor in reactivity. The comparison of the catalytic effect between the zinc compounds investigated suggest that Zn(OEt)₂, Zn(OH)₂, and ZnF₂ exhibit higher catalytic efficiency for the boron to zinc transmetalation due to the activation of the B? C_α bond through orbital interactions between the p orbitals of the EtO, OH, F groups and the empty p orbital of the boron center.     

酸洗脱矿对胜利褐煤热解过程中N迁移转化的影响

在石英管流化床反应器中对胜利褐煤进行快速热解实验,考察了773~1 173 K下酸洗脱矿对胜利褐煤热解过程中N迁移转化规律的影响。通过比较原煤和酸洗后煤中N的不同逸出规律可以得出,影响酸洗前后胜利褐煤热解过程中N迁移转化规律的主要是碱金属Na及碱土金属Ca;热解过程中,煤中的Na和Ca促使煤中的N向NH3转化并有效抑制了HCN的生成,金属离子的存在对催化焦油N转化为NH3的作用较为明显;原煤中的碱金属和碱土金属的赋存使半焦裂解反应加剧,降低了固体半焦的产率,半焦N的产率也随之减少;与原煤相比,酸洗煤热解半焦中的吡啶型N(N-6)含量较多,而吡咯型N(N-5)和季N(N-Q)相对较少。     

Carbon‐Coated LiTi2(PO4)3: An Ideal Insertion Host for Lithium‐Ion and Sodium‐Ion Batteries

We report the extraordinary performance of carbon‐coated sodium super ion conductor (NASICON)‐type LiTi₂(PO₄)₃ as an ideal host matrix for reversible insertion of both Li and Na ions. The NASICON‐type compound was prepared by means of a Pechini‐type polymerizable complex method and was subsequently carbon coated. Several characterization techniques such as XRD, thermogravimetric analysis (TGA), field‐emission (FE) SEM, TEM, and Raman analysis were used to study the physicochemical properties. Both guest species underwent a two‐phase insertion mechanism during the charge/discharge process that was clearly evidenced from galvanostatic and cyclic voltammetric studies. Unlike that of Li (≈1.5 moles of Li), Na insertion exhibits better reversibility (≈1.59 moles of Na) while experiencing a slightly higher capacity fade (≈8 % higher than Li) and polarization (780 mV) than Li. However, excellent rate capability profiles were noted for Na insertion relative to its counterpart Li. Overall, the Na insertion properties were found to be superior relative to Li insertion, which makes carbon‐coated NASICON‐type LiTi₂(PO₄)₃ hosts attractive for the development of next‐generation batteries.