电子束、离子辅助和离子束溅射三种工艺对光学薄膜性能的影响

运用电子束、离子辅助和离子束溅射三种镀膜工艺分别制备光学薄膜,包括单层氧化物薄膜和增透膜,然后采取一系列测试手段,如Zygo轮廓仪、原子力显微镜、表面热透镜技术和X射线衍射等技术,来分析和研究不同的工艺对这些薄膜性能的不同影响,以判断合理的沉积工艺。     

DF/HF化学激光器HYLTE喷管的副喷管质量流量系数

对DF/HF化学激光器HYLTE喷管的副喷管质量流量进行了数值和理论计算,得出入口滞止压力在0.01~0.4MPa之间、喉道半高度在0.1~0.9mm之间的喷管的氘气,氢气和氦气质量流量系数,总结出质量流量系数随入口滞止压力和喉道高度的变化规律,并给出拟合公式,为副喷管的设计提供依据。     

X光Gabor波带片编码成像技术实验研究

基于星光II实验装置进行了Gabor波带片编码成像探索性实验研究。采用束匀滑光斑三倍频激光打靶,辐照专门设计的ＣＨ埋金属条靶（共两种）,产生了有明确形状、边缘清晰的等离子体。研制了专门的Gabor波带片编码相机,并利用该相机采用单张胶片对不同的靶目标在不同的深度层次上曝光的技术,获得了具有深度层次信息的三维激光等离子体编码像。利用数值重建技术对实验所获得的图像解码,最终获得了在不同深度层次上的激光等离子体信息。     

On the two methods of kinetic theory of ECRM

The kinetic theory based on the expansion of local field in the guiding center coordinate system, presented by paper[1]–[3], has successfully developed into a theoretical system. The mathematical background and physical explanation of setting up the guiding center coordinate system is expounded in the paper. By using the methods of the guiding center and waveguide coordinate systems respectively, the same dispersion equations for interaction of an axially symmetrical single momentum electron beam with TE_mn field in the circular waveguide are rigorously derived. A number of mistakes in paper[4] are indicated as well.     

Theory of the transmission of metal strip gratings on a dielectric substrate application to submillimeter laser coupling

The advantages of supported metal strip gratings with respect to free-standing metal meshes are pointed out for applications as laser output couplers. A new, simple formula for the power transmission through the strip grating on a dielectric plate is derived from a line equivalent-circuit model. This formula is in good agreement with measurements performed on several samples, at different submillimeter wavelengths. An application to output couplers of far-infrared gas discharge lasers allows to improve the reliability of such lasers.x Unité associée au CNRS. U.A. 836.     

Calorimetric study of laser-irradiated thin foil targets

Hydrodynmaic efficiency of laser-irradiated thin aluminum and gold-coated aluminum targets was experimentally determined using a specially designed cone calorimeter. Velocity of the accelerated target and ablation pressure were also estimated from the experimental data. The laser irradiance range used in the experiments was between 10¹² and 10¹³ watts/cm². Experiments indicate that the fall in the hydrodynamic efficiency due to gold coating on aluminum target is about 12% at an irradiance of 8 × 10¹² W/cm².     

Analogue of Aharonov-Bohm effect in spin gauge theory

We predict the possibility of observing analogue of the Aharonov-Bohm effect due to long range interaction between spins originating in the framework of spin gauge theory developed earlier. The effect is predicted for both electrons (fermions) and photons. Appropriate experimental set-ups are suggested.     

利用爆聚等离子体研究X光激光

对脉冲功率技术驱动的爆聚等离子体过程进行了物理分析,在5％的偏差范围内,得到了和数值计算结果相一致的近似解析公式。计算结果表明,功率在3—4TW,输出电能300—400KJ,技术指标类似PITHON的加速器可以使质量为200—400μg的Kr气爆聚压缩成高温等离子体柱。     

非相干空间孤子的自陷行为

用相干密度法研究了一维非相干光束在饱和对数型光折变介质中的自陷行为,发现在传输过程中孤子的形态可具有稳态和周期性振荡的特点,具体取决于入射光束的初始宽度、相干特性和材料的非线性响应;研究了构成非相干光束的相干组份的传播行为,发现各相干组份的强度和光束宽度沿纵向发生周期性变化,峰值位置沿横向发生周期性变化.另外,利用横向相干宽度研究了非相干光束在各种传输状态下相干特性的变化,从而进一步解释了非相干光束在不同传播状态下的演化特性.     

CO2激光外差接收的实时强度成像

利用国内的元器件建立了声光调制CO_2激光外差接收系统,并进行了实验室内静止目标的实时强度成像,成像距离3m,成像视场7°× 5°,像素128×98,4个颜色梯度显示像强度.