Impacts of air pressure on the evolution of nanosecond pulse discharge products

Based on the nonequilibrium plasma dynamics of air discharge, a dynamic model of zero-dimensional plasma is established by combining the component density equation, the Boltzmann equation, and the energy transfer equation. The evolution properties of nanosecond pulse discharge (NPD) plasma under different air pressures are calculated. The results show that the air pressure has significant impacts on the NPD products and the peak values of particle number density for particles such as O atoms, O3 molecules, N2(A3) molecules in excited states, and NO molecules. It increases at first and then decreases with the increase of air pressure. On the other hand, the peak values of particle number density for N2(B3) and N2(C3) molecules in excited states are only slightly affected by the air pressure.     

Direct Measurement of Ammonia in Ambient Air

Abstract

A model is proposed which addresses the factors involved in the axial light attenuation of a coated waveguide (collector/sensor) whose polymer coating has been sensitized to ammonia. The experimental results appear to corroborate the model predictions of high sensitivity (ppb) and independence of sample flow on the collector/sensor. Concentration and relative humidity both determine the slopes of the transmission curves, the latter factor of which can be reduced to a second order effect by controlling the relative humidity in the sample holder.     

Study of indoor radon and thoron progeny levels in surrounding areas of Nalbari, Assam, India

With the growing understanding of the role of radon and its daughter products as major sources of radiation exposure, the importance of large number of estimation of radon concentration in various parts of the country is realized. Inhalation of radon, thoron and their decay products is the major source of the total radioactive dose received by the human population from natural radiation. The indoor radon and thoron progeny levels in Nalbari area of Assam are studied by using the LR-115 (type II) Solid State Nuclear Track Detector in Plastic Twin Chamber dosimeter. Radon and thoron progeny levels in different types of dwellings for one full calendar year are presented in this paper. For Assam Type (A.T.) houses, indoor radon progeny concentrations vary from 0.17 to 0.64 mWL with an annual geometric mean of 0.27 mWL and that for Reinforced Cement Concrete (R.C.C.) houses vary from 0.22 mWL to 0.60 mWL with the annual geometric mean of 0.37 mWL. The thoron progeny levels in A.T. houses also vary from 0.01 to of 0.05 mWL with an annual geometric mean of 0.02 mWL and that for R.C.C. houses vary from 0.02 to 0.08 mWL with the annual geometric mean of 0.04 mWL.      

重度原油注空气低温氧化过程研究(英文)

低温氧化反应对现场燃烧(ISC)技术点火的成功有十分重要的影响.采用高压氧化管,研究了不同温度压力下,新疆克拉玛依重度原油的低温氧化过程.结果表明,温度和压力的变化对低温氧化反应的放热程度、持续时间以及气体产物有明显影响.适合油样低温氧化反应的温度和压力分别为150℃和10MPa.此外,采用纯组分替代原油族组分进行低温氧化实验,研究低温氧化反应对原油族组分(饱和烃、芳香烃、胶质、沥青质)含量的影响.结果表明,原油所含族组分中,芳香烃组分最易被氧化,其含量由氧化前的19.17%减少到12.38%(150℃)和9.51%(250℃).随着低温氧化过程的进行,结构复杂的族组分(胶质、沥青质)的含量明显增加.实验数据对油藏实施注空气技术,以及该技术现场实施条件的确定有十分重要的指导意义.     

Nitration of Simple Aromatics with NO2 under Air Atmosphere in the Presence of Novel Brønsted Acidic Ionic Liquids

Abstract

Aromatics nitrate with NO₂/air catalyzed by novel Brønsted acidic ionic liquids (ILs) without any volatile chlorinated organic solvent under mild conditions. The ILs employed were caprolactam based, [Caprolactam]X (X^?=pTSO^?, BSO^?, BF₄ ^?, NO₃ ^?), which are of relatively lower cost and lower toxicity than traditional imidazolium‐based ILs. The nitration reactions were carried out at ?15 to ?0°C first, then at room temperature for a longer time with a little excessive NO₂ (ca. 1.4 eqv.) for moderate yield (for toluene). The IL could be reused four times.     

The Extraction of Polycyclic Aromatic Hydrocarbons from Atmospheric Particulate Matter Samples by Accelerated Solvent Extraction (ASE)

Abstract

The Accelerated solvent extraction (ASE) of PAHs (23 2- to 6-ring species) spiked onto glass fibre filters (GFFs) was studied as a function of variable extraction solvents, pressure, temperature and extraction times. Acceptable recoveries (85% ± 15%) were obtained for certain combinations of conditions and a tentative method (1500 psi, 150°C, 70:30 hexane:acetone mixture, 7 min heat-up time, 5 min static extraction time, 60% flush volume, 2 static cycles was selected for further testing. However, this method did not prove as effective as the traditional Soxhlet method of extraction when these parameters were used to extract native PAHs from ambient atmospheric particulate matter collected on a GFF by Integrated Atmospheric Deposition Network (IADN) sampling protocols. The extraction recovery study for spiked GFFs was repeated using slightly different extraction conditions: 2000 psi, 100°C, 70:30 hexane:acetone, 5 min heat-up time, 5 min static extraction time, 150% flush volume, 3 static cycles. When this method was applied to the extraction of native PAHs from ambient atmospheric particulate matter collected on GFFs, the results showed equivalent or better recoveries to that of the Soxhlet method. The total time of extraction was 25 min requiring only 30 mL of solvent. This ASE method is presently used to quantitatively determine PAHs in IADN particle-phase samples.     

A GC/MS Method of Determining Airborne DI-n-Butyl- and DL(2-Ethyl Hexyl) Phthalates

An analytical technique is presented that determines the amount of airborne phthalates in a glass fiber filter. The methodology makes use of a GC/MS system that has been integrated with a dedicated mini-computer.     

An investigation of calibration materials for the measurement of metals in ambient particulate matter on filters by LA-ICP-MS

Three different types of simple and low-cost calibration material for the measurement of the metals content of ambient particulate matter (PM) on filters using laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) have been compared: cellulose ester filters spiked with multi-element calibration solutions, pellets of compressed ambient particulate matter certified reference material (CRM), and powdered ambient particulate matter CRM adhered to a surface. Elements determined were As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn, each at approximate levels of 1000?ng per filter. Blank filters spiked with multi-elemental standards were found to be significantly more reproducible and repeatable than materials based on powdered reference materials. However, a comparison of these spiked filters with real samples of ambient PM showed that the analytical sensitivities obtained per mass of analyte were significantly different. It is concluded that the spiked filters could act as very effective quality control standards correcting, to within 1%, drifts in LA-ICP-MS measurements of up to 10%, or as indirect calibration materials supported by additional measurements using traditional wet chemical techniques.     

Volatile organic compounds in an urban environment: a comparison among Belgium,Vietnam and Ethiopia

The effects of urban and indoor air pollution on human health are a major environmental concern for all, but not much has been researched in the developing world. Specifically, quantitative data on the occurrence of volatile organic compounds (VOCs) – main contributors to air pollution – in Asia and Africa are scarce compared to the availability of data in the developed world. This paper presents one of the first studies focusing on the analysis and occurrence of VOCs in Vietnam and Ethiopia, which constitutes part of the novelty of this work. A spectrum of 34 VOCs was measured at eight different urban sites in Ghent (Belgium), Hanoi (Vietnam), Jimma and Addis Ababa (Ethiopia) during three sampling campaigns from September 2008 to September 2010. Sampling was done in an active way by means of sorbent tubes filled with Tenax TA. The analysis was done by TD-GC-MS using internal standard calibration. Data were interpreted and compared in terms of (i) individual, subgroup and total VOCs concentration (TVOCs), (ii) indoor-to-outdoor (I/O) concentration ratios, (iii) source identification by diagnostic ratio and/or correlation coefficients, and (iv) ozone formation potential (OFP) at outdoor sites based on up-to-date maximum incremental reactivity (MIR). I/O concentration ratios varied between 0.2 and 30, with big differences noticed with respect to the type of VOC(s) considered and the type of outdoor sampling location. The highest TVOC concentrations were measured in street samples with maximum values of 54?µg/m³ in Ghent, 507?µg/m³ in Hanoi and 318?µg/m³ in Addis Ababa illustrating the large difference in ambient air quality levels. This is also reflected in the arithmetic mean OFP values (µg/m³) of 82, 1308 and 596 in Ghent, Hanoi and Addis Ababa, respectively. Results of this study could be helpful to support formulation of national policy with regard to ambient air quality.