An improved Sampling Strategy for the Measurement of VOCs in Air,Based on Cooled Sampling and Analysis by Thermodesorption-GC-MS/FID

Abstract

Reliable and comprehensive sampling methods are required to obtain accurate data for VOC concentrations in air samples. The major drawback of the adsorption tube sampling method, widely employed in environmental studies, is the fact that C₂ compounds are usually not trapped quantitatively.

The focus of this work was thus to improve sampling based on adsorption tubes packed with Molsieve and Carbosieve. To improve the sampling efficiency for the C₂ compounds, a cooling device, based on Peltier cooling was constructed, which could be operated at a temperature down to ?30°C.

Experiments under laboratory and field conditions were carried out to study the influence of the sampling temperatuie on the recovery of ethane and ethene as the most volatile VOCs. The results clearly demonstrate the need for a cooled sampling device for the analysis of C₂ compounds in air. Under the investigated conditions, the recoveries with ambient temperature sampling were only in the range of 38–46% for ethane and 33–59% for ethene respectively, in comparison to the cooled sampling device. These findings are only valid for the described conditions and can change significantly with temperature and concentration. A generalisation of the recovery is thus very difficult to give.

The use of the sampling device for a field study is reported, where samples were collected simultaneously at three different altitudes in a diurnal profile on the slope of the Schulterberg mountain in Tyrol (Austria).     

Determination of Volatile Halogenated Compounds in Tap and Surface Waters from the Gdańsk District

Abstract

The present method is based on preconcentration of organic contaminants on XAD-4 as sorbent, thermal desorption, mineralization and coulometric argentometric titration for the final determination of halides. The results were calculated as the total parameter VOX (volatile organic halogen) expressed as chlorine. The method has been used for the VOX determination in tap water, Vistula river water and Baltic Sea water. Sampling of the Baltic Sea water has been carried out during the research cruise of the r/v ‘Oceania’. The relatively high anthropogenic pollution of the river Vistula (c _vox = 11–45 μg Cl/cd³), Gulf of Gdańsk (c _vox = 0.6–4.5 μg Cl/dm³) and the Pomerania Bay (c _vox = 2 μg Cl/dm³) has been determined. The VOX concentration in the tap water varied between 13 and 56 μg/dm³; that is, this water is seriously polluted by volatile organic halogen compounds.     

Impacts of air pressure on the evolution of nanosecond pulse discharge products

Based on the nonequilibrium plasma dynamics of air discharge, a dynamic model of zero-dimensional plasma is established by combining the component density equation, the Boltzmann equation, and the energy transfer equation. The evolution properties of nanosecond pulse discharge (NPD) plasma under different air pressures are calculated. The results show that the air pressure has significant impacts on the NPD products and the peak values of particle number density for particles such as O atoms, O3 molecules, N2(A3) molecules in excited states, and NO molecules. It increases at first and then decreases with the increase of air pressure. On the other hand, the peak values of particle number density for N2(B3) and N2(C3) molecules in excited states are only slightly affected by the air pressure.     

A safe minimum standard,the elasticity of substitution,and the cleanup of the Ganges in Varanasi

Despite repeated calls for a thorough cleanup of water pollution in the Ganges river, there are only two papers in the social sciences by Batabyal and Beladi (2017, 2019) that have shed theoretical light on this cleanup problem and its connection to the sustainability of tourism in Varanasi. Hence, we extend the above‐mentioned analyses and focus on two specific questions. First, we introduce the notion of a safe minimum standard (SMS) into the study and show how to analyze a probabilistic model of the Ganges cleanup problem when the SMS is accounted for. Second, for a representative citizen of Varanasi, we study how the magnitude of the elasticity of substitution between a composite consumption good and water quality in the Ganges—modeled by the SMS—affects the tradeoff between consumption and water quality maintenance.     

A Water-Stable Lanthanide Coordination Polymer as Multicenter Platform for Ratiometric Luminescent Sensing Antibiotics

As a hot topic of global concern, the distinguishing and detecting of antibiotic pollution is crucial owing to its adverse effect on ecosystems and human health stemming from excessive use and poor management. Herein, a water-stable lanthanide coordination polymer sensor (Dy-TCPB) with multiple emitting centers is prepared. The versatile Dy-TCPB can conveniently differentiate various antibiotics, and displays a self-calibration luminescent response to nitrofurazone (NFZ) and furazolidone (FZD). Each antibiotic exhibits notable correlation to a unique combination of the two ligand-to-Dy ion emission intensity ratios, enabling two-dimensional fingerprint recognition. Furthermore, the novel self-calibration sensor demonstrates effective recognition of NFZ and FZD with excellent sensitivity and selectivity, and detection limits as low as 0.0476 and 0.0482 μm for NFZ and FZD, respectively. The synthetic approach for the fabrication of a singular coordination polymer exhibiting multiple emissions provides a promising strategy for the development of facile and effective ratiometric sensors.     

Direct Measurement of Ammonia in Ambient Air

Abstract

A model is proposed which addresses the factors involved in the axial light attenuation of a coated waveguide (collector/sensor) whose polymer coating has been sensitized to ammonia. The experimental results appear to corroborate the model predictions of high sensitivity (ppb) and independence of sample flow on the collector/sensor. Concentration and relative humidity both determine the slopes of the transmission curves, the latter factor of which can be reduced to a second order effect by controlling the relative humidity in the sample holder.     

Unveiling the importance of reactant mass transfer in environmental catalysis: Taking catalytic chlorobenzene oxidation as an example

To date, investigations onto the regulation of reactants mass transfer has been paid much less attention in environmental catalysis. Herein, we demonstrated that by rationally designing the adsorption sites of multi-reactants, the pollutant destruction efficiency, product selectivity, reaction stability and secondary pollution have been all affected in the catalytic chlorobenzene oxidation (CBCO). Experimental results revealed that the co-adsorption of chlorobenzene (CB) and gaseous O₂ at the oxygen vacancies of CeO₂ led to remarkably high CO₂ generation, owning to their short mass transfer distance on the catalyst surface, while their separated adsorptions at Brönsted HZSM-5 and CeO₂ vacancies resulted in a much lower CO₂ generation, and produced significant polychlorinated byproducts in the off-gas. However, this separated adsorption model yielded superior long-term stability for the CeO₂/HZSM-5 catalyst, owning to the protection of CeO₂ oxygen vacancies from Cl poisoning by the preferential adsorption of CB on the Brönsted acidic sites. This work unveils that design of environmental catalysts needs to consider both of the catalyst intrinsic property and reactant mass transfer; investigations of the latter could pave a new way for the development of highly efficient catalysts towards environmental pollution control.     

Zur hydrogeologischen Interpretation von Isotopendaten im Zusammenhang mit Stofftransportprozessen

The migration of radionuclides and other tracers in porous layers is determined by substance transport. The physical and hydraulic basis of retardation is investigated. A definition of a factor of retardation is given, describing the ratio between the pore velocity of the water and the velocity of tracer migration. Consequences to the groundwater protection are discussed.     

Analysis and Fate of Dibenzothiophene Derivatives in the Marine Environment

Abstract

Dibenzothiophene (DBT) and related methylated derivatives are known to be among the most persistent and probably the most toxic PAH in the marine environment. Their analysis and their fate by photo-oxidation and biodegradation were studied.

The methylated DBT isomers, provided that they are resolved by high resolution GC, were used as organic markers of oil pollution in oysters. The determination of the relative distribution of the four monomethyl DBT allowed to characterize the source of pollution in an oyster-area in the North Brittany (France).

The fate of methylated DBT compounds was studied in a controlled sea-water enclosure where Arabian light oil was spilled. Analysis of the weathered oil showed that: (i) oil was degraded by photo-oxidation at a rate of 0.004% day; (ii) the half-lives of photolysis of methylated DBT was dependent upon the number of methyl groups on the aromatic nucleus: 8 days for DBT, 20 days for methyl-1 DBT and more than 2 years for trimethylated DBT. Compounds solubilized in the water column were identified as methyl-substituted dibenzothiophene sulfoxides and sulfones by HPLC with synchrofluorescence and GC-flame photometric detection.

The metabolic pathway of DBT was established in vitro. Rat microsomes transformed this substrate to DBT-5-oxide and subsequently to DBT-5-dioxide. Such an enzymatic S-oxidation was shown to be principally Cytochrome-P-450 dependent. It is suggested that the mixed-function oxidase (MFO) activity of marine species could be evaluated by this S-oxidation test in addition to the usual aryl hydrocarbon hydroxylase.     

Polybrominated diphenyl ethers (PBDEs) in marine sediment of Thermaikos Gulf,Greece

Polybrominated diphenyl ether (PBDE) concentrations were determined in marine sediment samples collected from 7 different locations around Thermaikos Gulf in north Greece. PBDEs were detected in all sampling sites and their average total concentration (ΣPBDEs) ranged from 0.26 to 4.92?ng?g^?1?d.w. Concentrations were an order of magnitude higher in locations outlining the inner part of the Gulf, which were also closer to industrial areas, sewage treatment plant discharges, the city's harbour and landfill area. These findings suggest pollution in the aquatic ecosystem from industrial and urban activities in the area. Congener profiles exhibit predominance of BDE-209, while concentrations of other PBDE congeners were usually lower, when compared to similar studies from other countries globally, indicating that Thermaikos Gulf is among the low-polluted areas. Statistical analysis showed significant differences among the higher polluted sampling stations. Statistically significant differences also existed between sampling stations with high and low PBDE concentrations. Correlations between congeners suggested local contamination sources; however, specific point sources of pollution were not established.